Karl-Heinz Wurst

Herr Dr.-Ing.

Berater
Institut für Steuerungstechnik der Werkzeugmaschinen und Fertigungseinrichtungen

Kontakt

+49 711 685 82467
E-Mail
Visitenkarte (VCF)

Seidenstr. 36
70174 Stuttgart
Deutschland
Raum: 5.108

Publikationen

Meine Veröffentlichungen:

2018
1. Felbrich, Benjamin ; Wulle, Frederik ; Allgaier, Christoph ; Menges, Achim ; Verl, Alexander ; Wurst, Karl-Heinz ; Nebelsick, James H.: A novel rapid additive manufacturing concept for architectural composite shell construction inspired by the shell formation in land snails. In: Bioinspiration & Biomimetics, Bioinspiration & Biomimetics. Bd. 13 (2018), Nr. 2, S. 026010
  - BibTeX
  - Link
  BibTeX
  @article{1748-3190-13-2-026010, abstract = {State-of-the-art rapid additive manufacturing (RAM)—specifically fused filament fabrication (FFF)—has gained popularity among architects, engineers and designers for the quick prototyping of technical devices, the rapid production of small series and even the construction scale fabrication of architectural elements. The spectrum of producible shapes and the resolution of detail, however, are determined and constrained by the layer-based nature of the fabrication process. These aspects significantly limit FFF-based approaches for the prefabrication and in situ fabrication of free-form shells at the architectural scale. Snails exhibit a shell building process that suggests ways to overcome these limits. They produce a soft, pliable proteinaceous film—the periostracum—which later hardens and serves, among other functions, as a form-giving surface for an inner calcium carbonate layer. Snail shell formation behavior is interpreted from a technical point of view to extract potentially useful aspects for a biomimetic transfer. A RAM concept for the continuous extrusion of thin free-form composite shells inspired by the snail shell formation is presented.}, author = {Felbrich, Benjamin and Wulle, Frederik and Allgaier, Christoph and Menges, Achim and Verl, Alexander and Wurst, Karl-Heinz and Nebelsick, James H.}, doi = {https://doi.org/10.1088/1748-3190/aaa50d}, journal = {Bioinspiration & Biomimetics}, number = 2, pages = 026010, title = {A novel rapid additive manufacturing concept for architectural composite shell construction inspired by the shell formation in land snails}, url = {http://stacks.iop.org/1748-3190/13/i=2/a=026010}, volume = 13, year = 2018 }
  Link
  http://stacks.iop.org/1748-3190/13/i=2/a=026010
2017
1. Wulle, Frederik ; Kovaleva, Daria ; Christof, Hans ; Wurst, Karl-Heinz ; Lechler, Armin ; Verl, Alexander ; Sobek, Werner ; Haase, Walter ; u. a.: Die Natur als Ideengeber für moderne Fertigungstechniken. In: Stuttgart, N. (Hrsg.) ; Stuttgart, N. (Hrsg.): Baubionik - Biologie beflügel Architektur, Baubionik - Biologie beflügel Architektur. Bd. Serie C, 2017
  - BibTeX
  BibTeX
  @inbook{wulle2017natur, author = {Wulle, Frederik and Kovaleva, Daria and Christof, Hans and Wurst, Karl-Heinz and Lechler, Armin and Verl, Alexander and Sobek, Werner and Haase, Walter and Gresser, Götz}, booktitle = {Baubionik - Biologie beflügel Architektur}, editor = {Stuttgart, Naturkundemuseum}, number = 82, title = {Die Natur als Ideengeber für moderne Fertigungstechniken}, volume = {Serie C}, year = 2017 }
2016
1. Coupek, Daniel ; Kovaleva, Daria ; Christof, Hans ; Wurst, Karl-Heinz ; Verl, Alexander ; Sobek, Werner ; Haase, Walter ; Gresser, Götz T ; u. a.: Fabrication of Biomimetic and Biologically Inspired (Modular) Structures for Use in the Construction Industry. In: Biomimetic Research for Architecture and Building Construction, Biomimetic Research for Architecture and Building Construction : Springer International Publishing, 2016, S. 319--339
  - BibTeX
  BibTeX
  @incollection{coupek2016fabrication, author = {Coupek, Daniel and Kovaleva, Daria and Christof, Hans and Wurst, Karl-Heinz and Verl, Alexander and Sobek, Werner and Haase, Walter and Gresser, G{\"o}tz T and Lechler, Armin}, booktitle = {Biomimetic Research for Architecture and Building Construction}, pages = {319--339}, publisher = {Springer International Publishing}, title = {Fabrication of Biomimetic and Biologically Inspired (Modular) Structures for Use in the Construction Industry}, year = 2016 }
2. Nebelsick, James H ; Allgaier, Christoph ; Felbrich, Benjamin ; Coupek, Daniel ; Reiter, Renate ; Reiter, Günter ; Menges, Achim ; Lechler, Armin ; u. a.: Continuous Fused Deposition Modelling of Architectural Envelopes Based on the Shell Formation of Molluscs: A Research Review. In: Biomimetic Research for Architecture and Building Construction, Biomimetic Research for Architecture and Building Construction : Springer International Publishing, 2016, S. 243--260
  - BibTeX
  BibTeX
  @incollection{nebelsick2016continuous, author = {Nebelsick, James H and Allgaier, Christoph and Felbrich, Benjamin and Coupek, Daniel and Reiter, Renate and Reiter, G{\"u}nter and Menges, Achim and Lechler, Armin and Wurst, Karl-Heinz}, booktitle = {Biomimetic Research for Architecture and Building Construction}, pages = {243--260}, publisher = {Springer International Publishing}, title = {Continuous Fused Deposition Modelling of Architectural Envelopes Based on the Shell Formation of Molluscs: A Research Review}, year = 2016 }
2014
1. Batke, Christoph ; Wurst, Karl-Heinz ; Lechler, Armin ; Verl, Alexander: The printed machine tool for micro machining: The printed machine tool for micro machining. Erlangen, Trans Tech Publications, ISBN: 978-3-03835-245-7 (2014)
  - BibTeX
  BibTeX
  @misc{BatkeWurstLechlerEtAl2014, __markedentry = {[xtl:6]}, abstract = {Machine tools for micro machining are so far not adapted to work piece sizes and process forces. They feature hardly any modularity and do not allow reconfiguration in a significant process change. One possibility to adapt machines is to produce them from plastic or composite materials through generative methods. This printed machine is a reconfigurable, monolithic module, in which drives are integrated. By a cooperative motion generation, larger workspaces can be realized while the installation spaces decrease. This gives the possibility to use alternative drive technologies, for example piezo-drives. Based on these methods, two small generatively produced machine tools are designed, using two different drive principles. The first machine tool is equipped with ball screw drives, which are cost efficient and space saving. The second machine tool uses piezo-actuators, which are very dynamic in motion generation. Further has to be examined, which tolerances and rigidities are needed at critical points and whether a generative or a conventional production is feasible.}, address = {Erlangen}, author = {Batke, Christoph and Wurst, Karl-Heinz and Lechler, Armin and Verl, Alexander}, pages = {S. 433-440--}, publisher = {Trans Tech Publications, ISBN: 978-3-03835-245-7}, title = {The printed machine tool for micro machining: The printed machine tool for micro machining}, year = 2014 }
2013
1. Lopes, Joao ; Wurst, Karl-Heinz ; Verl, Alexander: Industrial Powerline Communication for Machine-tools and Industrial Robots: Industrial Powerline Communication for Machine-tools and Industrial Robots (2013)
  - BibTeX
  BibTeX
  @misc{LopesWurstVerl2013, __markedentry = {[xtl:6]}, abstract = {The machine manufactures are facing a challenging moment: on one side the need to lower the prices, on the other side the need for more machine flexibility and availability. In this context, Industrial Powerline Comunication (IPLC) can play a capital role, by reducing the costs and increasing flexibility. In this paper the requirements and constraints of Powerline Communication (PLC) and Industrial Communication are merged and a solution to this problem proposed. This solution consists of a ferrite filtering, with the task of building a Daisy-chain network topology on top of a PLC bus.}, author = {Lopes, Joao and Wurst, Karl-Heinz and Verl, Alexander}, pages = {--}, title = {Industrial Powerline Communication for Machine-tools and Industrial Robots: Industrial Powerline Communication for Machine-tools and Industrial Robots}, year = 2013 }
2. Hoffmeister, Hans-Werner ; Gerdes, Arne ; Wurst, Karl-Heinz ; Verl, Alexander ; Heinze, Tobias: Entwicklung eines Leichtbau-Werkzeugmaschinengstells aus CFK mit Hilfe derFiniten-Elmente: Entwicklung eines Leichtbau-Werkzeugmaschinengstells aus CFK mit Hilfe derFiniten-Elmente (2013)
  - BibTeX
  BibTeX
  @misc{HoffmeisterGerdesWurstEtAl2013, __markedentry = {[xtl:6]}, abstract = {Der Trend zum Leichtbau hält seit einiger Zeit auch im WerkzeugmaschinenbauEinzug. Bisher liegt der Fokus jedoch noch verstärkt auf den bewegten Komponenten, um der Forderung nach höherer Dynamik z.B. durch Massenverringerung der entsprechenden Bauteile nachzukommen. Bei Anwendung von CFK als Leichtbauwerkstoff im Gestell einer Werkzeugmaschine können die charakteristischen Vorteile wiebeispielsweise die hohe thermische Stabilität gezielt genutzt werden, um eine höhere Fertigungs- und Wiederholgenauigkeit bei der Bearbeitung zu erzielen. Dem stehen Nachteile wie Anisotropie und die Notwendigkeit eines belastungsangepassten Lagenaufbaus gegenüber. Mit Hilfe der Finiten-Elemente Methode (FEM) können der Lagenaufbau, Faserorientierung sowie die Faserwinkel schon während der Entwicklungdefiniert und der Einfluss auf das Bauteilverhalten überprüft werden. Der vorliegendeBeitrag zeigt die Auslegung und Bewertung eines Rahmengestells aus CFK für ein neuartiges Maschinenkonzept für die Mikrobearbeitung mit inverser, kooperativer Bewegungserzeugung. Ebenfalls werden ABAQUS-Simulationsergebnisse der statischen Steifigkeit und dynamischen Nachgiebigkeit des Gesamtsystemsaufgezeigt und mit konventionellen Werkstoffen verglichen.}, author = {Hoffmeister, Hans-Werner and Gerdes, Arne and Wurst, Karl-Heinz and Verl, Alexander and Heinze, Tobias}, pages = {--}, title = {Entwicklung eines Leichtbau-Werkzeugmaschinengstells aus CFK mit Hilfe derFiniten-Elmente: Entwicklung eines Leichtbau-Werkzeugmaschinengstells aus CFK mit Hilfe derFiniten-Elmente}, year = 2013 }

Karl-Heinz Wurst

Kontakt

Publikationen

2018

BibTeX

Link

2017

BibTeX

2016

BibTeX

BibTeX

2014

BibTeX

2013

BibTeX

BibTeX

Zielgruppe

Formalia

Services

Organisation

Karl-Heinz Wurst

Kontakt

Publikationen

2018

BibTeX

Link

2017

BibTeX

2016

BibTeX

BibTeX

2014

BibTeX

2013

BibTeX

BibTeX

So erreichen Sie das ISW

Zielgruppe

Formalia

Services

Organisation