Alexander Verl

Herr Univ.-Prof. Dr.-Ing.

Institutsleitung, Professur Steuerungstechnik und Mechatronik für Produktionssysteme
Institut für Steuerungstechnik der Werkzeugmaschinen und Fertigungseinrichtungen

Kontakt

+49 711 685 82422
E-Mail
Visitenkarte (VCF)

Seidenstr. 36
70174 Stuttgart
Deutschland
Raum: 5.005

Publikationen

Meine Publikationen:

2024
1. Dietrich, David ; Neubauer, Michael ; Lechler, Armin ; Verl, Alexander: Iterative Planning as a Holistic Framework for Production System-Wide Optimization Control Loops. In: Silva, F. J. G. ; Pereira, A. B. ; Camphilho, R. D. S. G. (Hrsg.) ; Silva, F. J. G. ; Pereira, A. B. ; Camphilho, R. D. S. G. (Hrsg.): Flexible Automation and Intelligent Manufacturing: Establishing Bridges for More Sustainable Manufacturing Systems, Flexible Automation and Intelligent Manufacturing: Establishing Bridges for More Sustainable Manufacturing Systems. Cham : Springer Nature Switzerland, 2024 — ISBN 9783031382413, S. 611--621
  - BibTeX
  - Link
  BibTeX
  @inproceedings{dietrich2024iterative, abstract = {The increasing number of Industry 4.0 services adds further complexity to software, enabling more control loops throughout the production system. To address the organizational and technological challenges under uncertain production conditions, this paper proposes a holistic framework for production planning. It consists of a software-oriented planning architecture and an iterative planning behavior that enables continuous adjustments based on the current state of the production system and products. Principles of organizational, multi-stage production planning and technological, zero-defect manufacturing are considered in combination. Necessary engineering services can be extended by automatically integrating self-describing software services into production system-wide engineering control loops. In a first implementation step, general functionality can be demonstrated by continuous production plan and process-program generation and adaptation with simulative validation for individually configurable products based on the production system state and target goals. The gap between organizational and technological planning is further closed.}, address = {Cham}, author = {Dietrich, David and Neubauer, Michael and Lechler, Armin and Verl, Alexander}, booktitle = {Flexible Automation and Intelligent Manufacturing: Establishing Bridges for More Sustainable Manufacturing Systems}, doi = {10.1007/978-3-031-38241-3_69}, editor = {Silva, Francisco J. G. and Pereira, António B. and Camphilho, Raul D. S. G.}, isbn = {9783031382413}, pages = {611--621}, publisher = {Springer Nature Switzerland}, refid = {10.1007/978-3-031-38241-3_69}, title = {Iterative Planning as a Holistic Framework for Production System-Wide Optimization Control Loops}, url = {https://doi.org/10.1007/978-3-031-38241-3_69}, year = 2024 }
  Link
  https://doi.org/10.1007/978-3-031-38241-3_69
2. Dietrich, David ; Zürn, Manuel ; Reiff, Colin ; Neubauer, Michael ; Lechler, Armin ; Verl, Alexander: Software-Defined Value Networks: Motivation, Approaches, and Research Activities. In: Bauernhansl, T. ; Verl, A. ; Liewald, M. ; Möhring, H.-C. (Hrsg.) ; Bauernhansl, T. ; Verl, A. ; Liewald, M. ; Möhring, H.-C. (Hrsg.): Production at the Leading Edge of Technology, Production at the Leading Edge of Technology. Cham : Springer Nature Switzerland, 2024 — ISBN 978-3-031-47394-4, S. 514–524
  - BibTeX
  - Link
  BibTeX
  @inproceedings{dietrich2024softwaredefined, address = {Cham}, author = {Dietrich, David and Zürn, Manuel and Reiff, Colin and Neubauer, Michael and Lechler, Armin and Verl, Alexander}, booktitle = {Production at the Leading Edge of Technology}, doi = {10.1007/978-3-031-47394-4_50}, editor = {Bauernhansl, Thomas and Verl, Alexander and Liewald, Mathias and Möhring, Hans-Christian}, isbn = {978-3-031-47394-4}, pages = {514-524}, publisher = {Springer Nature Switzerland}, title = {Software-Defined Value Networks: Motivation, Approaches, and Research Activities}, url = {https://doi.org/10.1007/978-3-031-47394-4_50}, year = 2024 }
  Link
  https://doi.org/10.1007/978-3-031-47394-4_50
3. Göttlich, Simone ; Hoher, Simon ; Verl, Alexander ; Weißen, Jennifer ; Kienzlen, Annika: Materialflusssimulation für die Virtuelle Inbetriebnahme in Steuerungsechtzeit. In: Verl, A. ; Röck, S. ; Scheifele, C. (Hrsg.) ; Verl, A. ; Röck, S. ; Scheifele, C. (Hrsg.): Echtzeitsimulation in der Produktionsautomatisierung: Beiträge zu Virtueller Inbetriebnahme, Digitalem Engineering und Digitalen Zwillingen, Echtzeitsimulation in der Produktionsautomatisierung: Beiträge zu Virtueller Inbetriebnahme, Digitalem Engineering und Digitalen Zwillingen. Berlin, Heidelberg : Springer Berlin Heidelberg, 2024 — ISBN 978-3-662-66217-5, S. 121--140
  - BibTeX
  - Link
  BibTeX
  @inbook{Göttlich2024, address = {Berlin, Heidelberg}, author = {G{\"o}ttlich, Simone and Hoher, Simon and Verl, Alexander and Wei{\ss}en, Jennifer and Kienzlen, Annika}, booktitle = {Echtzeitsimulation in der Produktionsautomatisierung: Beitr{\"a}ge zu Virtueller Inbetriebnahme, Digitalem Engineering und Digitalen Zwillingen}, doi = {10.1007/978-3-662-66217-5_7}, editor = {Verl, Alexander and R{\"o}ck, Sascha and Scheifele, Christian}, isbn = {978-3-662-66217-5}, pages = {121--140}, publisher = {Springer Berlin Heidelberg}, title = {Materialflusssimulation f{\"u}r die Virtuelle Inbetriebnahme in Steuerungsechtzeit}, url = {https://doi.org/10.1007/978-3-662-66217-5_7}, year = 2024 }
  Link
  https://doi.org/10.1007/978-3-662-66217-5_7
4. Jaensch, Florian ; Verl, Alexander: Simulationsmodelle der Virtuellen Inbetriebnahme als Lernumgebung für Reinforcement Learning. In: Verl, A. ; Röck, S. ; Scheifele, C. (Hrsg.) ; Verl, A. ; Röck, S. ; Scheifele, C. (Hrsg.): Echtzeitsimulation in der Produktionsautomatisierung: Beiträge zu Virtueller Inbetriebnahme, Digitalem Engineering und Digitalen Zwillingen, Echtzeitsimulation in der Produktionsautomatisierung: Beiträge zu Virtueller Inbetriebnahme, Digitalem Engineering und Digitalen Zwillingen. Berlin, Heidelberg : Springer Berlin Heidelberg, 2024 — ISBN 978-3-662-66217-5, S. 213--227
  - BibTeX
  - Link
  BibTeX
  @inbook{Jaensch2024, abstract = {Die steigenden Anforderungen der Produktionstechnik nach flexiblen und trotzdem wirtschaftlich effizienten Anlagen stellt die Automatisierungstechnik vor gro{\ss}e Herausforderungen. Die Umstellung von beispielsweise einer Roboterzelle auf ein neues Produkt muss dabei schnell und aufwandsarm m{\"o}glich sein. Die Steuerungssysteme, sowie die zugeh{\"o}rigen Engineering Methoden, m{\"u}ssen zunehmend intelligent und lernf{\"a}hig werden, um m{\"o}glichst viele der bisher manuellen Aufw{\"a}nde selbstst{\"a}ndig zu {\"u}bernehmen. Die Simulationsumgebung f{\"u}r eine Virtuelle Inbetriebnahme stellt eine geeignete Lernumgebung dar, in der das Steuerungssystem, mit Methoden des maschinellen Lernens, automatisch trainiert werden kann. Daf{\"u}r m{\"u}ssen die Simulationswerkzeuge erweitert und m{\"o}glichst standardisierte Schnittstellen geschaffen werden.}, address = {Berlin, Heidelberg}, author = {Jaensch, Florian and Verl, Alexander}, booktitle = {Echtzeitsimulation in der Produktionsautomatisierung: Beiträge zu Virtueller Inbetriebnahme, Digitalem Engineering und Digitalen Zwillingen}, doi = {10.1007/978-3-662-66217-5_13}, editor = {Verl, Alexander and Röck, Sascha and Scheifele, Christian}, isbn = {978-3-662-66217-5}, pages = {213--227}, publisher = {Springer Berlin Heidelberg}, title = {Simulationsmodelle der Virtuellen Inbetriebnahme als Lernumgebung für Reinforcement Learning}, url = {https://doi.org/10.1007/978-3-662-66217-5_13}, year = 2024 }
  Link
  https://doi.org/10.1007/978-3-662-66217-5_13
5. Kienzlen, Annika ; Verl, Alexander: A Signal-Based Approach to Switching Between Micro and Macro Material Flow Models for Production Systems. In: Bauernhansl, T. ; Verl, A. ; Liewald, M. ; Möhring, H.-C. (Hrsg.) ; Bauernhansl, T. ; Verl, A. ; Liewald, M. ; Möhring, H.-C. (Hrsg.): Production at the Leading Edge of Technology, Production at the Leading Edge of Technology. Cham : Springer Nature Switzerland, 2024 — ISBN 978-3-031-47394-4, S. 491--501
  - BibTeX
  BibTeX
  @inproceedings{10.1007/978-3-031-47394-4_48, address = {Cham}, author = {Kienzlen, Annika and Verl, Alexander}, booktitle = {Production at the Leading Edge of Technology}, editor = {Bauernhansl, Thomas and Verl, Alexander and Liewald, Mathias and M{\"o}hring, Hans-Christian}, isbn = {978-3-031-47394-4}, pages = {491--501}, publisher = {Springer Nature Switzerland}, title = {A Signal-Based Approach to Switching Between Micro and Macro Material Flow Models for Production Systems}, year = 2024 }
6. Kübler, Karl ; Jaensch, Florian ; Daniel, Christian ; Verl, Alexander: Nutzen von Digitalen Zwillingen und Virtueller Inbetriebnahme für den Maschinen- und Anlagenbau. In: Verl, A. ; Röck, S. ; Scheifele, C. (Hrsg.) ; Verl, A. ; Röck, S. ; Scheifele, C. (Hrsg.): Echtzeitsimulation in der Produktionsautomatisierung, Echtzeitsimulation in der Produktionsautomatisierung. Berlin, Heidelberg : Springer Berlin Heidelberg, 2024 — ISBN 978-3-662-66216-8, S. 141--154
  - BibTeX
  BibTeX
  @incollection{Kubler.2024, address = {Berlin, Heidelberg}, author = {Kübler, Karl and Jaensch, Florian and Daniel, Christian and Verl, Alexander}, booktitle = {Echtzeitsimulation in der Produktionsautomatisierung}, doi = {10.1007/978-3-662-66217-5_8}, editor = {Verl, Alexander and Röck, Sascha and Scheifele, Christian}, isbn = {978-3-662-66216-8}, pages = {141--154}, publisher = {Springer Berlin Heidelberg}, title = {Nutzen von Digitalen Zwillingen und Virtueller Inbetriebnahme für den Maschinen- und Anlagenbau}, year = 2024 }
7. Walker, Moritz ; Fischer, Marc ; Neubauer, Michael ; Lechler, Armin ; Verl, Alexander: Towards a Domain Specific Language for the Development of Distributed Real-Time Systems. In: Bauernhansl, T. ; Verl, A. ; Liewald, M. ; Möhring, H.-C. (Hrsg.) ; Bauernhansl, T. ; Verl, A. ; Liewald, M. ; Möhring, H.-C. (Hrsg.): Production at the Leading Edge of Technology, Production at the Leading Edge of Technology. Cham : Springer Nature Switzerland, 2024 — ISBN 978-3-031-47394-4, S. 268--279
  - BibTeX
  - Link
  BibTeX
  @inproceedings{10.1007/978-3-031-47394-4_27, abstract = {Static configurations and slow adaption to changing requirements characterize today's production systems. In order to cope with variable external influences, these systems need to become more flexible. One basic building block to achieve more flexible automation systems from the software perspective are modular real-time architectures which are realized as distributed real-time systems. The improved modularity and flexibility come at the price of greater complexity. In order to enable developers to design robust systems regarding real-time properties, a domain specific language is proposed, which allows reasoning and validation of modules and composed distributed real-time systems.}, address = {Cham}, author = {Walker, Moritz and Fischer, Marc and Neubauer, Michael and Lechler, Armin and Verl, Alexander}, booktitle = {Production at the Leading Edge of Technology}, editor = {Bauernhansl, Thomas and Verl, Alexander and Liewald, Mathias and M{\"o}hring, Hans-Christian}, isbn = {978-3-031-47394-4}, pages = {268--279}, publisher = {Springer Nature Switzerland}, title = {Towards a Domain Specific Language for the Development of Distributed Real-Time Systems}, url = {https://link.springer.com/chapter/10.1007/978-3-031-47394-4_27}, year = 2024 }
  Link
  https://link.springer.com/chapter/10.1007/978-3-031-47394-4_27
8. Zürn, Manuel ; Dzubba, Marcel ; Reiff, Colin ; Ajdinovic, Samed ; Lechler, Armin ; Verl, Alexander: Cobot for Automated Vision Data: Streamlining Production with Automated Annotations for Machine Learning. In: 2024 International Conference on Artificial Intelligence, Computer, Data Sciences and Applications (ACDSA), 2024 International Conference on Artificial Intelligence, Computer, Data Sciences and Applications (ACDSA), 2024, S. 1–6
  - BibTeX
  BibTeX
  @inproceedings{10468034, abstract = {Robotic vision tasks require a large amount of annotated data for effective training and performance. However, the manual creation of such datasets is a complex and time-consuming process. Particularly for smaller companies or those with high product variability, there is a need to optimise the resources dedicated to creating datasets for machine vision applications. This paper investigates novel ways to acquire annotated vision data through the integration of collaborative robots. Two methods are outlined to streamline the generation of annotated datasets. One of these methods is then used to construct a dataset tailored for 6D robotic gripping of an automotive connector. The effectiveness of automated annotated dataset generation is demonstrated by training a deep learning model to accurately estimate the orientation of the automotive connector.}, author = {Zürn, Manuel and Dzubba, Marcel and Reiff, Colin and Ajdinovic, Samed and Lechler, Armin and Verl, Alexander}, booktitle = {2024 International Conference on Artificial Intelligence, Computer, Data Sciences and Applications (ACDSA)}, doi = {10.1109/ACDSA59508.2024.10468034}, month = {02}, pages = {1-6}, title = {Cobot for Automated Vision Data: Streamlining Production with Automated Annotations for Machine Learning}, year = 2024 }
2023
1. Ellwein, Carsten ; Neumann, Rebekka ; Verl, Alexander: Software-defined Manufacturing: Data Representation. In: Procedia CIRP, Procedia CIRP. Bd. 118, Elsevier BV (2023), S. 360--365
  - BibTeX
  - Link
  BibTeX
  @article{Ellwein_2023, author = {Ellwein, Carsten and Neumann, Rebekka and Verl, Alexander}, doi = {10.1016/j.procir.2023.06.062}, journal = {Procedia {CIRP}}, pages = {360--365}, publisher = {Elsevier {BV}}, title = {Software-defined Manufacturing: Data Representation}, url = {https://doi.org/10.1016%2Fj.procir.2023.06.062}, volume = 118, year = 2023 }
  Link
  https://doi.org/10.1016%2Fj.procir.2023.06.062
2. Fischer, Marc ; Klingel, Lars ; Lechler, Armin ; Verl, Alexander ; Neubauer, Michael: Dynamic Safety Distance Determination for Human Robot Coexistence in Industrial Applications. In: Advances in Automotive Production Technology – Towards Software-Defined Manufacturing and Resilient Supply Chains, Advances in Automotive Production Technology – Towards Software-Defined Manufacturing and Resilient Supply Chains. (2023), S. 35–45
  - BibTeX
  BibTeX
  @article{fischer2023dynamic, abstract = {The coexistence of humans and robots in manufacturing requires safety. Typically, safety functionalities for coexistence are based on speed and separation monitoring according to EN ISO 10218. Thereby, a robot should reduce speed or stop completely when an obstacle is too close to avoid collisions. Nowadays, despite this standard, speed and separation monitoring are still realized with static worst-case safety assumptions about the kinematics of humans and robots. Over the years, different static techniques have evolved in the industrial environment like fences, light fences, or camera-based systems where critical zones can be configured. The latter is admittedly more flexible in the configuration but still static during the run-time of the manufacturing system. The static worst-case assumptions result in large unnecessary distances between humans and robots, which leads to inefficient use of space. Therefore, factories are larger than they need to be, which leads to higher costs. This work aims to enhance the use of space in human-robot coexistence applications to make factory layouts more efficient. Therefore, a dynamic minimum distance calculation based on the DIN ISO 15066 with the kinematic information of the coexisting human and industrial robots is provided. It is shown in a simulation that this approach of a dynamic safety distance calculation leads to a reduction of the required space.}, author = {Fischer, Marc and Klingel, Lars and Lechler, Armin and Verl, Alexander and Neubauer, Michael}, doi = {10.1007/978-3-031-27933-1_4}, journal = {Advances in Automotive Production Technology – Towards Software-Defined Manufacturing and Resilient Supply Chains}, pages = {35-45}, title = {Dynamic Safety Distance Determination for Human Robot Coexistence in Industrial Applications}, year = 2023 }
3. Fischer, Marc ; Walker, Moritz ; Lechler, Armin ; Riedel, Oliver ; Verl, Alexander: Fehlertolerante Sicherheitssteuerung aus der Cloud. In: wt Werkstattstechnik online (Hrsg.) ; wt Werkstattstechnik online (Hrsg.): wt Werkstattstechnik, wt Werkstattstechnik. Bd. 113, 2023, S. 189–194
  - BibTeX
  - Link
  BibTeX
  @incollection{fischer2023fehlertolerante, author = {Fischer, Marc and Walker, Moritz and Lechler, Armin and Riedel, Oliver and Verl, Alexander}, doi = {10.37544/1436-4980-2023-05-11}, editor = {wt Werkstattstechnik online}, journal = {wt Werkstattstechnik}, number = 5, pages = {189-194}, title = {Fehlertolerante Sicherheitssteuerung aus der Cloud}, url = {https://elibrary.vdi-verlag.de/10.37544/1436-4980-2023-05-11/fehlertolerante-sicherheitssteuerung-aus-der-cloud-cloud-based-fault-tolerance-of-safety-control-in-the-cloud-jahrgang-113-2023-heft-05?page=1}, volume = 113, year = 2023 }
  Link
  https://elibrary.vdi-verlag.de/10.37544/1436-4980-2023-05-11/fehlertolerante-sicherheitssteuerung-aus-der-cloud-cloud-based-fault-tolerance-of-safety-control-in-the-cloud-jahrgang-113-2023-heft-05?page=1
4. Frick, Florian ; Weiss, Manuel ; Lechler, Armin ; Verl, Alexander: Software-Defined Control Cabinet - Reprogramming Instead of Replacing. In: Bauernhansl, T. ; Verl, A. ; Liewald, M. ; Möhring, H.-C. (Hrsg.) ; Bauernhansl, T. ; Verl, A. ; Liewald, M. ; Möhring, H.-C. (Hrsg.): Production at the Leading Edge of Technology, Production at the Leading Edge of Technology. Cham : Springer Nature Switzerland, 2023 — ISBN 978-3-031-47394-4, S. 438–447
  - BibTeX
  - Link
  BibTeX
  @inproceedings{frick2024softwaredefined, address = {Cham}, author = {Frick, Florian and Weiss, Manuel and Lechler, Armin and Verl, Alexander}, booktitle = {Production at the Leading Edge of Technology}, doi = {10.1007/978-3-031-47394-4_43}, editor = {Bauernhansl, Thomas and Verl, Alexander and Liewald, Mathias and Möhring, Hans-Christian}, isbn = {978-3-031-47394-4}, pages = {438-447}, publisher = {Springer Nature Switzerland}, title = {Software-Defined Control Cabinet - Reprogramming Instead of Replacing}, url = {https://doi.org/10.1007/978-3-031-47394-4_43}, year = 2023 }
  Link
  https://doi.org/10.1007/978-3-031-47394-4_43
5. Fur, Shan ; Ajdinovic, Samed ; Lechler, Armin ; Verl, Alexander: Towards an Implementation of Simulation Based Digital Twins in Cyber-Physical Production Systems Environments. In: 2023 IEEE 28th International Conference on Emerging Technologies and Factory Automation (ETFA), 2023 IEEE 28th International Conference on Emerging Technologies and Factory Automation (ETFA), 2023, S. 1–4
  - BibTeX
  BibTeX
  @inproceedings{10275580, abstract = {The increasing digitization of the manufacturing industry offers a wide range of opportunities for the effective use of production data, which can lead to significant time and cost savings. One promising approach is the use of synchronous simulations during the actual operation of cyber-physical production systems (CPPS) to provide valuable insights into possible performance improvements and at the same time reduce the risk of costly downtime. This paper presents a novel concept that enables structured storage of CPPS production data as part of a digital twin that serves as a virtual replica of the physical production environment. In particular, this approach is based on the Asset Administration Shell (AAS), which provides a comprehensive framework for the management of production data and allows for a seamless integration with simulation models. Storing production data in a structured and standardized format can make data queries efficient, facilitate data processing, and provide a solid foundation for simulation model development, calibration, and validation. These simulation models can then be used to identify potential process improvements and test different scenarios, minimizing the risk of disruption to actual production.}, author = {Fur, Shan and Ajdinovic, Samed and Lechler, Armin and Verl, Alexander}, booktitle = {2023 IEEE 28th International Conference on Emerging Technologies and Factory Automation (ETFA)}, doi = {10.1109/ETFA54631.2023.10275580}, issn = {1946-0759}, month = {09}, pages = {1-4}, title = {Towards an Implementation of Simulation Based Digital Twins in Cyber-Physical Production Systems Environments}, year = 2023 }
6. Helfesrieder, Nico ; Lechler, Armin ; Verl, Alexander: Leichtbau durch schichtweise LLM-Fertigung – zur Anisotropie der Bauteileigenschaften. In: Konstruktion, Konstruktion. Bd. 75, VDI Fachmedien GmbH and Co. KG (2023), Nr. 09, S. 42--44
  - BibTeX
  - Link
  BibTeX
  @article{2023, author = {Helfesrieder, Nico and Lechler, Armin and Verl, Alexander}, doi = {10.37544/0720-5953-2023-09-42}, journal = {Konstruktion}, number = 09, pages = {42--44}, publisher = {{VDI} Fachmedien {GmbH} and Co. {KG}}, title = {Leichtbau durch schichtweise {LLM}-Fertigung {\textendash} zur Anisotropie der Bauteileigenschaften}, url = {https://doi.org/10.37544%2F0720-5953-2023-09-42}, volume = 75, year = 2023 }
  Link
  https://doi.org/10.37544%2F0720-5953-2023-09-42
7. Helfesrieder, Nico ; Neubauer, Michael ; Lechler, Armin ; Verl, Alexander: Anisotropic Damping and Stiffness of laminated steel parts using adhesive bonding – an empirical influence study. In: Procedia CIRP, Procedia CIRP. Bd. 120 : Elsevier BV, 2023, S. 428–433
  - BibTeX
  - Link
  BibTeX
  @inproceedings{Helfesrieder_2023, abstract = {Layered part manufacturing enables part topology to be optimized internally by structuring individual layers separately, which is especially promising for large machine parts. However, the resulting part properties as a function of the selected manufacturing parameters are largely unexplored. Therefore, this paper investigates the impacts of the slicing direction, the sheet thickness as well as the adhesive on anisotropic damping and stiffness values of adhesively bonded steel parts. A cantilever beam of symmetric cross-section is chosen as an easy-to-manufacture geometry. Three redundant specimens were prepared for each of six parameter variations investigated within this study, resulting in a total of 18 investigated beams. The results indicate highly anisotropic stiffness and damping as a function of the layer build-up direction and it was found that the modal damping rises with increasing amount of adhesive. These findings must be taken into account for future applications of layered lightweight machine parts and their simulative predictability should be studied.}, author = {Helfesrieder, Nico and Neubauer, Michael and Lechler, Armin and Verl, Alexander}, doi = {10.1016/j.procir.2023.09.014}, issn = {2212-8271}, journal = {Procedia CIRP}, pages = {428–433}, publisher = {Elsevier BV}, title = {Anisotropic Damping and Stiffness of laminated steel parts using adhesive bonding – an empirical influence study}, url = {http://dx.doi.org/10.1016/j.procir.2023.09.014}, volume = 120, year = 2023 }
  Link
  http://dx.doi.org/10.1016/j.procir.2023.09.014
8. Hinze, Christoph ; Riedel, O. ; Verl, A. ; Wortmann, A. (Hrsg.) ; Riedel, O. ; Verl, A. ; Wortmann, A. (Hrsg.): Dynamiksteigerung von Kugelgewindetrieben durch modellbasierte Lageregelung der nachgiebigen Mechanik, Universität Stuttgart, 2023
  - BibTeX
  BibTeX
  @phdthesis{hinze2023dynamiksteigerung, author = {Hinze, Christoph}, editor = {Riedel, Oliver and Verl, Alexander and Wortmann, Andreas}, isbn = {978-3-8396-1940-7}, language = {de}, school = {Universität Stuttgart}, title = {Dynamiksteigerung von Kugelgewindetrieben durch modellbasierte Lageregelung der nachgiebigen Mechanik}, year = 2023 }
9. Jaensch, Florian ; Herburger, Klaus ; Bobe, Eva ; Csiszar, Akos ; Kienzlen, Annika ; Verl, Alexander: Complex Physics with Graph Networks for Industrial Material Flow Simulation. In: Procedia CIRP, Procedia CIRP. Bd. 118, Elsevier BV (2023), S. 50–55
  - BibTeX
  - Link
  BibTeX
  @article{Jaensch_2023, author = {Jaensch, Florian and Herburger, Klaus and Bobe, Eva and Csiszar, Akos and Kienzlen, Annika and Verl, Alexander}, doi = {10.1016/j.procir.2023.06.010}, issn = {2212-8271}, journal = {Procedia CIRP}, pages = {50–55}, publisher = {Elsevier BV}, title = {Complex Physics with Graph Networks for Industrial Material Flow Simulation}, url = {http://dx.doi.org/10.1016/j.procir.2023.06.010}, volume = 118, year = 2023 }
  Link
  http://dx.doi.org/10.1016/j.procir.2023.06.010
10. Jaensch, Florian ; Klingel, Lars ; Fur, Shan ; Verl, Alexander: Virtuelle Methoden in der Produktionstechnik: Virtuelle Inbetriebnahme als Bindeglied zwischen digitaler und realer Fabrik. In: atp magazin, atp magazin. Bd. 65, Vulkan-Verlag GmbH (2023), Nr. 6–7, S. 82–88
  - BibTeX
  - Link
  BibTeX
  @article{Jaensch_2023, author = {Jaensch, Florian and Klingel, Lars and Fur, Shan and Verl, Alexander}, doi = {10.17560/atp.v65i6-7.2658}, issn = {2190-4111}, journal = {atp magazin}, month = {06}, number = {6–7}, pages = {82–88}, publisher = {Vulkan-Verlag GmbH}, title = {Virtuelle Methoden in der Produktionstechnik: Virtuelle Inbetriebnahme als Bindeglied zwischen digitaler und realer Fabrik}, url = {http://dx.doi.org/10.17560/atp.v65i6-7.2658}, volume = 65, year = 2023 }
  Link
  http://dx.doi.org/10.17560/atp.v65i6-7.2658
11. Jud, Oliver ; Lechler, Armin ; Verl, Alexander: Vorspannungsverluste kompensieren. In: konstruktionspraxis, konstruktionspraxis. (2023), Nr. 07, S. 42–43
  - BibTeX
  - Link
  BibTeX
  @article{jud2023vorspannungsverluste, author = {Jud, Oliver and Lechler, Armin and Verl, Alexander}, journal = {konstruktionspraxis}, month = {07}, number = 07, pages = {42-43}, title = {Vorspannungsverluste kompensieren}, url = {https://www.konstruktionspraxis.vogel.de/vorspannungsverluste-kompensieren-prototyp-auf-dem-pruefstand-a-9f59277ce2066aace87a5962d35cc579/}, year = 2023 }
  Link
  https://www.konstruktionspraxis.vogel.de/vorspannungsverluste-kompensieren-prototyp-auf-dem-pruefstand-a-9f59277ce2066aace87a5962d35cc579/
12. Kamm, Valentin ; Mesmer, Patrick ; Lechler, Armin ; Verl, Alexander: Prozessmodellierung für das Rührreibschweißen/Process modeling of friction stir welding – Semi-analytical process model of robotic friction stir welding. In: wt Werkstattstechnik online, wt Werkstattstechnik online. Bd. 113, VDI Fachmedien GmbH and Co. KG (2023), Nr. 05, S. 183–188
  - BibTeX
  - Link
  BibTeX
  @article{Kamm_2023, author = {Kamm, Valentin and Mesmer, Patrick and Lechler, Armin and Verl, Alexander}, doi = {10.37544/1436-4980-2023-05-5}, issn = {1436-4980}, journal = {wt Werkstattstechnik online}, number = 05, pages = {183–188}, publisher = {VDI Fachmedien GmbH and Co. KG}, title = {Prozessmodellierung für das Rührreibschweißen/Process modeling of friction stir welding – Semi-analytical process model of robotic friction stir welding}, url = {http://dx.doi.org/10.37544/1436-4980-2023-05-5}, volume = 113, year = 2023 }
  Link
  http://dx.doi.org/10.37544/1436-4980-2023-05-5
13. Kienzlen, Annika ; Verl, Alexander: KI ebnet den Weg für autonome Katheternavigation. In: mt | medizintechnik, mt | medizintechnik. Bd. 143 (2023), Nr. 6, S. 10–16
  - BibTeX
  BibTeX
  @article{kienzlen2023ebnet, author = {Kienzlen, Annika and Verl, Alexander}, journal = {mt | medizintechnik}, number = 6, pages = {10-16}, title = {KI ebnet den Weg für autonome Katheternavigation}, volume = 143, year = 2023 }
14. Kienzlen, Annika ; Zuern, Manuel ; Kazemi, Shahab ; Xu, Weiliang ; Cheng, Leo K. ; Strommel, Martin ; Verl, Alexander: Recurrent Neural Network for Modelling a Contractive Soft Actuator. In: ISR Europe 2023; 56th International Symposium on Robotics, ISR Europe 2023; 56th International Symposium on Robotics, 2023, S. 419–425
  - BibTeX
  BibTeX
  @inproceedings{10363103, author = {Kienzlen, Annika and Zuern, Manuel and Kazemi, Shahab and Xu, Weiliang and Cheng, Leo K. and Strommel, Martin and Verl, Alexander}, booktitle = {ISR Europe 2023; 56th International Symposium on Robotics}, pages = {419-425}, title = {Recurrent Neural Network for Modelling a Contractive Soft Actuator}, year = 2023 }
15. Klingel, Lars ; Heine, Alexander ; Acher, Steven ; Dausend, Niklas ; Verl, Alexander: Simulation-Based Predictive Real-Time Collision Avoidance for Automated Production Systems. In: 2023 IEEE 19th International Conference on Automation Science and Engineering (CASE), 2023 IEEE 19th International Conference on Automation Science and Engineering (CASE), 2023, S. 1–6
  - BibTeX
  BibTeX
  @inproceedings{10260637, abstract = {The usage of simulation technology is deeply established in the development and commissioning of automated production systems. Impending collisions of moving kinematics, such as robots, can therefore already be detected with the help of simulations before the production system goes into operation. However, changes in the control software of production systems that occur in the operating phase are often not secured, which entails risk, especially in the age of cyber-physical and adaptive production systems. This work presents a predictive simulation-based approach for the online collision avoidance of automated production systems by enabling virtual commissioning simulations for the application in the operating phase. This allows a cost-efficient way to achieve the safe operation of production systems without the need of additional configurations and sensors.}, author = {Klingel, Lars and Heine, Alexander and Acher, Steven and Dausend, Niklas and Verl, Alexander}, booktitle = {2023 IEEE 19th International Conference on Automation Science and Engineering (CASE)}, doi = {10.1109/CASE56687.2023.10260637}, issn = {2161-8089}, month = {08}, pages = {1-6}, title = {Simulation-Based Predictive Real-Time Collision Avoidance for Automated Production Systems}, year = 2023 }
16. Klingel, Lars ; Kübler, Karl ; Verl, Alexander: A Multicore Control System Architecture as an Operating Platform for Industrial Digital Twins. In: Procedia CIRP, Procedia CIRP. Bd. 118, Elsevier BV (2023), S. 294–299
  - BibTeX
  - Link
  BibTeX
  @article{Klingel_2023, author = {Klingel, Lars and Kübler, Karl and Verl, Alexander}, doi = {10.1016/j.procir.2023.06.051}, issn = {2212-8271}, journal = {Procedia CIRP}, pages = {294–299}, publisher = {Elsevier BV}, title = {A Multicore Control System Architecture as an Operating Platform for Industrial Digital Twins}, url = {http://dx.doi.org/10.1016/j.procir.2023.06.051}, volume = 118, year = 2023 }
  Link
  http://dx.doi.org/10.1016/j.procir.2023.06.051
17. Kurth, Daniel ; Ristok, Simon ; Rühle, Sopie ; Verl, Alexander ; Giessen, Harald: Multi-axis two photon polymerization machine and software concept for the manufacturing of aspheric lenses on non-planar substrates. In: Procedia CIRP, Procedia CIRP. Bd. 118 : Elsevier BV, 2023, S. 682--687
  - BibTeX
  - Link
  BibTeX
  @inproceedings{10.1016/j.procir.2023.06.117, author = {Kurth, Daniel and Ristok, Simon and Rühle, Sopie and Verl, Alexander and Giessen, Harald}, doi = {10.1016/j.procir.2023.06.117}, journal = {Procedia {CIRP}}, pages = {682--687}, publisher = {Elsevier {BV}}, title = {Multi-axis two photon polymerization machine and software concept for the manufacturing of aspheric lenses on non-planar substrates}, url = {https://doi.org/10.1016%2Fj.procir.2023.06.117}, volume = 118, year = 2023 }
  Link
  https://doi.org/10.1016%2Fj.procir.2023.06.117
18. Kurth, Daniel ; Verl, Alexander: Kinematic multi-axis two-photon polymerization printer concept for the manufacturing of micro-optics. In: Narendran, N. ; Rao, G. (Hrsg.) ; Narendran, N. ; Rao, G. (Hrsg.): 3D Printing for Lighting, 3D Printing for Lighting. Bd. 12670 : SPIE, 2023, S. 1267004
  - BibTeX
  - Link
  BibTeX
  @inproceedings{10.1117/12.2675889, author = {Kurth, Daniel and Verl, Alexander}, booktitle = {3D Printing for Lighting}, doi = {10.1117/12.2675889}, editor = {Narendran, Nadarajah and Rao, Govi}, organization = {International Society for Optics and Photonics}, pages = 1267004, publisher = {SPIE}, title = {Kinematic multi-axis two-photon polymerization printer concept for the manufacturing of micro-optics}, url = {https://doi.org/10.1117/12.2675889}, volume = 12670, year = 2023 }
  Link
  https://doi.org/10.1117/12.2675889
19. König, Timo ; Verl, Alexander ; Lechler, Armin: Cornuspline Path Planning Algorithm for the Fabrication of Coreless Wound Fiber-Polymer Composite Structures. In: IECON 2023- 49th Annual Conference of the IEEE Industrial Electronics Society, IECON 2023- 49th Annual Conference of the IEEE Industrial Electronics Society, 2023, S. 1–6
  - BibTeX
  BibTeX
  @inproceedings{10312385, abstract = {Industrial robots are now used in a wide range of manufacturing processes. The increasing demands on quality and the complexity of the processes cannot always be met by the range of functions that are available in numerical control systems. In the coreless winding of fiber-polymer composites, it is important to keep the roving tension as constant as possible while maintaining a high processing speed. Currently, the winding paths are programmed via a number of control points. This results in a trade-off between lower process properties and higher processing speed with fewer control points. Conversely, finer interpolation of the path can improve process characteristics at lower processing speeds. With interpolation methods that are adapted to the process, new possibilities open up to overcome these trade-offs. This paper presents a spline path planning algorithm based on clothoids. This algorithm considers both the process requirements and the dynamic characteristics of the manufacturing unit. Furthermore, the algorithm is validated on a test contour and compared with established commercial methods.}, author = {König, Timo and Verl, Alexander and Lechler, Armin}, booktitle = {IECON 2023- 49th Annual Conference of the IEEE Industrial Electronics Society}, doi = {10.1109/IECON51785.2023.10312385}, issn = {2577-1647}, month = {10}, pages = {1-6}, title = {Cornuspline Path Planning Algorithm for the Fabrication of Coreless Wound Fiber-Polymer Composite Structures}, year = 2023 }
20. König, Timo ; Verl, Alexander ; Lechler, Armin: Replication Data for: Cornuspline path planning algorithm for the fabrication of coreless wound fiber-polymer composite structures.
  - BibTeX
  - Link
  BibTeX
  @dataset{https://doi.org/10.18419/darus-3577, author = {König, Timo and Verl, Alexander and Lechler, Armin}, doi = {10.18419/DARUS-3577}, publisher = {DaRUS}, title = {Replication Data for: Cornuspline path planning algorithm for the fabrication of coreless wound fiber-polymer composite structures}, url = {https://darus.uni-stuttgart.de/citation?persistentId=doi:10.18419/darus-3577}, year = 2023 }
  Link
  https://darus.uni-stuttgart.de/citation?persistentId=doi:10.18419/darus-3577
21. Leipe, Valentin ; Hinze, Christoph ; Lechler, Armin ; Verl, Alexander: Model predictive control for compliant feed drives with offset-free tracking behavior. In: Production Engineering, Production Engineering. (2023)
  - BibTeX
  - Link
  BibTeX
  @article{Leipe2023, abstract = {Industrial machine tool feed drives are predominantly controlled by cascade control due to their low tuning complexity and inherent robustness. However, the cascaded structure requires the inner cascades to have higher dynamics than the outer cascades, which limits the achievable dynamic accuracy. Direct control approaches, which substitute the position and velocity cascade, offer the potential to utilize the unused potential. A promising approach is model predictive control (MPC), which optimizes the manipulated variable with a plant model along a prediction horizon. However, model uncertainties between the nominal model and the real plant lead to tracking errors. Therefore, this paper presents, a linear MPC (LMPC) and an adaptive MPC (AMPC) with an additional integral action to robustly compensate for model mismatches. Both controllers use a compliant model, are real-time capable with a sample rate of {\$}{\$}{\{}{\{}2{\}}{\backslash},{\backslash}textrm{\{}kHz{\}}{\}}{\$}{\$}and consider state and input space constraints. The AMPC accounts for position-varying stiffness and friction. The controllers are experimentally compared with classical P-PI cascaded control on a ball screw drive. They show a tracking error reduction of {\$}{\$}{\{}{\{}37{\}}{\{}{\backslash},{\backslash}{\%}{\}}{\}}{\$}{\$}(LMPC) and {\$}{\$}{\{}{\{}44{\}}{\{}{\backslash},{\backslash}{\%}{\}}{\}}{\$}{\$}(AMPC) during a high speed motion profile and an increase in bandwidth of {\$}{\$}{\{}{\{}180{\}}{\{}{\backslash},{\backslash}{\%}{\}}{\}}{\$}{\$}(LMPC) and {\$}{\$}{\{}{\{}184{\}}{\{}{\backslash},{\backslash}{\%}{\}}{\}}{\$}{\$}(AMPC), resulting in significantly improved dynamic accuracy.}, author = {Leipe, Valentin and Hinze, Christoph and Lechler, Armin and Verl, Alexander}, day = 22, doi = {10.1007/s11740-023-01206-6}, issn = {1863-7353}, journal = {Production Engineering}, month = {05}, title = {Model predictive control for compliant feed drives with offset-free tracking behavior}, url = {https://doi.org/10.1007/s11740-023-01206-6}, year = 2023 }
  Link
  https://doi.org/10.1007/s11740-023-01206-6
22. Neubauer, Michael ; Reiff, Colin ; Walker, Moritz ; Oechsle, Stefan ; Lechler, Armin ; Verl, Alexander: Cloud-based evaluation platform for software-defined manufacturing - Stuttgarter Maschinenfabrik as a realization example of an Industry 4.0 production. In: at - Automatisierungstechnik, at - Automatisierungstechnik. Bd. 71 (2023), Nr. 5, S. 351--363
  - BibTeX
  - Link
  BibTeX
  @article{NeubauerReiffWalkerOechsleLechlerVerl+2023+351+363, abstract = {Software-Deﬁned Manufacturing (SDM) is a new paradigm for how to manufacture in the Industry 4.0 factory of the future. The approach requires a fundamental change in thinking and reinvention of central business models in production technology. This paper discusses the main challenges on the way to a software-deﬁned factory of the future and illustrates possible solutions. An exemplary future factory is presented, in which the validation of the solutions is carried out. For this purpose, cloud-based Computerized Numerical Control (CNC) is considered as use case. Experimental results demonstrate the proof of concept and show the potential for further applications.}, author = {Neubauer, Michael and Reiff, Colin and Walker, Moritz and Oechsle, Stefan and Lechler, Armin and Verl, Alexander}, doi = {doi:10.1515/auto-2022-0137}, journal = {at - Automatisierungstechnik}, number = 5, pages = {351--363}, title = {Cloud-based evaluation platform for software-defined manufacturing - Stuttgarter Maschinenfabrik as a realization example of an Industry 4.0 production}, url = {https://doi.org/10.1515/auto-2022-0137}, volume = 71, year = 2023 }
  Link
  https://doi.org/10.1515/auto-2022-0137
23. Neubauer, Michael ; Steinle, Lukas ; Reiff, Colin ; Ajdinovic, Samed ; Klingel, Lars ; Lechler, Armin ; Verl, Alexander: Architecture for Manufacturing-X: Bringing Asset Administration Shell, Eclipse Dataspace Connector and OPC UA together. In: Manufacturing Letters, Manufacturing Letters. Bd. 37, Elsevier (2023), S. 1–6
  - BibTeX
  - Link
  BibTeX
  @article{Neubauer_2023, abstract = {Manufacturing-X represents the idea of a decentralized data economy. The aim is to increase sustainability, competitiveness and resilience by digitizing supply chains. Technically, this requires three technologies. First, a standardized data model to ensure interoperability across company boundaries. Second, a solution to realize sovereign inter-organizational data exchange. And thirdly, a component for the company’s internal data communication. Asset Administration Shell (AAS), Eclipse Dataspace Connector (EDSC) and Open Platform Communication Unified Architecture (OPC UA) are suitable solutions. This paper introduces an appropriate architecture to combine these technologies in an industrial production environment and discusses existing challenges, limitations and future potentials.}, author = {Neubauer, Michael and Steinle, Lukas and Reiff, Colin and Ajdinovic, Samed and Klingel, Lars and Lechler, Armin and Verl, Alexander}, doi = {10.1016/j.mfglet.2023.05.002}, journal = {Manufacturing Letters}, month = {06}, pages = {1-6}, publisher = {Elsevier}, title = {Architecture for Manufacturing-X: Bringing Asset Administration Shell, Eclipse Dataspace Connector and OPC UA together}, url = {https://doi.org/10.1016%2Fj.mfglet.2023.05.002}, volume = 37, year = 2023 }
  Link
  https://doi.org/10.1016%2Fj.mfglet.2023.05.002
24. Neumann, Rebekka ; von Arnim, Christian ; Neubauer, Michael ; Lechler, Armin ; Verl, Alexander: Requirements and Challenges in the Configuration of a Real-Time Node for OPC UA Publish-Subscribe Communication. In: 2023 29th International Conference on Mechatronics and Machine Vision in Practice (M2VIP), 2023 29th International Conference on Mechatronics and Machine Vision in Practice (M2VIP), 2023, S. 1–6
  - BibTeX
  BibTeX
  @inproceedings{10413399, abstract = {Factory automation is evolving from a hierarchical structure towards an interconnected architecture in which systems at different levels can communicate seamlessly with each other. This requires an appropriate replacement of proprietary fieldbus systems in the automation sector. A promising solution to implement cross-plane end-to-end real-time capable communication between computing nodes is proposed in literature. The usage of Open Platform Communication Unified Architecture (OPC UA) as the information model with the Publish-Subscribe (PubSub) communication mechanism in combination with Time Sensitive Networking (TSN) is presented to fulfill the requirements for message transmission. In contrast to the state of the art of configuring fieldbus systems, the configuration of such a real-time communication node has to be done manually. This process is complex, as deep knowledge in different domains is required. In this work we elaborate the requirements for such a communication node and present the resulting implementation challenges, which can be used as the basis for a configuration tool.}, author = {Neumann, Rebekka and von Arnim, Christian and Neubauer, Michael and Lechler, Armin and Verl, Alexander}, booktitle = {2023 29th International Conference on Mechatronics and Machine Vision in Practice (M2VIP)}, doi = {10.1109/M2VIP58386.2023.10413399}, month = {11}, pages = {1-6}, title = {Requirements and Challenges in the Configuration of a Real-Time Node for OPC UA Publish-Subscribe Communication}, year = 2023 }
25. Oechsle, Stefan ; Frick, Florian ; Lechler, Armin ; Verl, Alexander: A modular configuration and management framework for distributed real-time applications based on converged networks using TSN. In: Procedia CIRP, Procedia CIRP. Bd. 118 : Elsevier BV, 2023, S. 38--43
  - BibTeX
  - Link
  BibTeX
  @inproceedings{oechsle2023modular, abstract = {Industrial control systems are distributed real-time applications deployed on field and controller devices, connected by fieldbuses. Their lack of interoperability, mutually and towards IT-systems, is a major obstacle for the digitalization. Converged networks are considered as the solution across industries with Time-Sensitive Networking (TSN) as the enabling technology. To ease the adoption of TSN for industrial automation, a modular framework was developed for future engineering tools. The core of the framework consists of a module management including interfaces and a YANG-based datastore, maintaining a system-wide data model. Modules are provided for network configuration implementing CUC-functions, monitoring and container-based application and deployment.}, author = {Oechsle, Stefan and Frick, Florian and Lechler, Armin and Verl, Alexander}, doi = {10.1016/j.procir.2023.06.008}, journal = {Procedia CIRP}, pages = {38--43}, publisher = {Elsevier BV}, title = {A modular configuration and management framework for distributed real-time applications based on converged networks using TSN}, url = {https://doi.org/10.1016/j.procir.2023.06.008}, volume = 118, year = 2023 }
  Link
  https://doi.org/10.1016/j.procir.2023.06.008
26. Oechsle, Stefan ; Walker, Moritz ; Fischer, Marc ; Frick, Florian ; Lechler, Armin ; Verl, Alexander: Real-Time Capable Architecture for Software-Defined Manufacturing. In: 2036, A. (Hrsg.) ; 2036, A. (Hrsg.): . Bd. Advances in Automotive Production Technology – Towards Software-Defined Manufacturing and Resilient Supply Chains : Springer, 2023 — ISBN 978-3-031-27932-4, S. 3–13
  - BibTeX
  - Link
  BibTeX
  @inbook{inbook, author = {Oechsle, Stefan and Walker, Moritz and Fischer, Marc and Frick, Florian and Lechler, Armin and Verl, Alexander}, doi = {10.1007/978-3-031-27933-1_1}, editor = {2036, Arena}, isbn = {978-3-031-27932-4}, month = {06}, pages = {3-13}, publisher = {Springer}, title = {Real-Time Capable Architecture for Software-Defined Manufacturing}, url = {https://doi.org/10.1007/978-3-031-27933-1_1}, volume = {Advances in Automotive Production Technology – Towards Software-Defined Manufacturing and Resilient Supply Chains}, year = 2023 }
  Link
  https://doi.org/10.1007/978-3-031-27933-1_1
27. Reichenbach, Thomas ; Verl, Alexander: Seilwindenprüfstand zur Untersuchung hochdynamischer Schlupf- und Reibeigenschaften von Kunststofffaserseilen. In: GmbH, V. F. (Hrsg.) antriebstechnik, antriebstechnik. Bd. 2023 (2023), Nr. 09, S. 40–42
  - BibTeX
  - Link
  BibTeX
  @article{reichenbach2023seilwindenprfstand, author = {Reichenbach, Thomas and Verl, Alexander}, editor = {GmbH, Vereinigte Fachverlage}, journal = {antriebstechnik}, month = {09}, number = 09, pages = {40-42}, title = {Seilwindenprüfstand zur Untersuchung hochdynamischer Schlupf- und Reibeigenschaften von Kunststofffaserseilen}, url = {https://digital.antriebstechnik.de/antriebstechnik-9-2023/68394687/40}, volume = 2023, year = 2023 }
  Link
  https://digital.antriebstechnik.de/antriebstechnik-9-2023/68394687/40
28. Steinle, Lukas ; Helfesrieder, Nico ; Lechler, Armin ; Verl, Alexander ; Montazeri, Ali ; Wang, Jinfan: Decentralized Motion Control for a Novel Planar Motor Intralogistics System. In: 2023 IEEE 32nd International Symposium on Industrial Electronics (ISIE), 2023 IEEE 32nd International Symposium on Industrial Electronics (ISIE) : IEEE, 2023
  - BibTeX
  - Link
  BibTeX
  @inproceedings{Steinle_2023, author = {Steinle, Lukas and Helfesrieder, Nico and Lechler, Armin and Verl, Alexander and Montazeri, Ali and Wang, Jinfan}, booktitle = {2023 IEEE 32nd International Symposium on Industrial Electronics (ISIE)}, doi = {10.1109/isie51358.2023.10227969}, month = {06}, publisher = {IEEE}, title = {Decentralized Motion Control for a Novel Planar Motor Intralogistics System}, url = {https://doi.org/10.1109%2Fisie51358.2023.10227969}, year = 2023 }
  Link
  https://doi.org/10.1109%2Fisie51358.2023.10227969
29. Trautwein, Felix ; Reichenbach, Thomas ; Pott, Andreas ; Verl, Alexander: A Predictor-Corrector-Scheme for the Geometry Planning for In-Operation-Reconfiguration of Cable-Driven Parallel Robots. In: Caro, S. ; Pott, A. ; Bruckmann, T. (Hrsg.) ; Caro, S. ; Pott, A. ; Bruckmann, T. (Hrsg.): Cable-Driven Parallel Robots, Cable-Driven Parallel Robots. Bd. 132. Cham : Springer Nature Switzerland, 2023 — ISBN 9783031323218, S. 261--272
  - BibTeX
  - Link
  BibTeX
  @inbook{trautwein2023predictorcorrectorscheme, address = {Cham}, author = {Trautwein, Felix and Reichenbach, Thomas and Pott, Andreas and Verl, Alexander}, booktitle = {Cable-Driven Parallel Robots}, doi = {10.1007/978-3-031-32322-5_21}, editor = {Caro, Stéphane and Pott, Andreas and Bruckmann, Tobias}, isbn = {9783031323218}, pages = {261--272}, publisher = {Springer Nature Switzerland}, title = {A Predictor-Corrector-Scheme for the Geometry Planning for In-Operation-Reconfiguration of Cable-Driven Parallel Robots}, url = {https://link.springer.com/chapter/10.1007/978-3-031-32322-5_21}, volume = 132, year = 2023 }
  Link
  https://link.springer.com/chapter/10.1007/978-3-031-32322-5_21
30. Verl, Alexander ; Hinze, Christoph: Increasing the dynamic accuracy of ball screw drives with quasi-sliding-mode (qSMC) position control. In: CIRP Annals, CIRP Annals., Elsevier BV (2023)
  - BibTeX
  - Link
  BibTeX
  @article{Verl_2023, author = {Verl, Alexander and Hinze, Christoph}, doi = {10.1016/j.cirp.2023.04.081}, journal = {{CIRP} Annals}, month = {05}, publisher = {Elsevier {BV}}, title = {Increasing the dynamic accuracy of ball screw drives with quasi-sliding-mode ({qSMC}) position control}, url = {https://doi.org/10.1016%2Fj.cirp.2023.04.081}, year = 2023 }
  Link
  https://doi.org/10.1016%2Fj.cirp.2023.04.081
31. Verl, Alexander ; Neubauer, Michael: Software-defined Manufacturing. In: Stuttgarter Maschinenbau Magazin, Stuttgarter Maschinenbau Magazin. Bd. 4 (2023), S. 28–31
  - BibTeX
  BibTeX
  @article{verl2023softwaredefined, abstract = {»Software-defined X« umfasst eine Reihe von Ansätzen aus der IT, die mittels Virtualisierung Software-Applikationen von der Hardware entkoppeln. Die konsequente Umsetzung dieses Paradigmas verspricht höhere Agilität und Flexibilität. Software-defined Manufacturing (SDM) überträgt diese Idee auf die Produktionstechnik.}, author = {Verl, Alexander and Neubauer, Michael}, journal = {Stuttgarter Maschinenbau Magazin}, pages = {28-31}, title = {Software-defined Manufacturing}, volume = 4, year = 2023 }
32. von Arnim, Christian ; Walker, Moritz ; Lechler, Armin ; Riedel, Oliver ; Verl, Alexander: Isolating Shared Resources for Time-Triggered Networking of Containerized Applications. In: 2023 29th International Conference on Mechatronics and Machine Vision in Practice (M2VIP), 2023 29th International Conference on Mechatronics and Machine Vision in Practice (M2VIP), 2023, S. 1–6
  - BibTeX
  - Link
  BibTeX
  @inproceedings{10413388, author = {von Arnim, Christian and Walker, Moritz and Lechler, Armin and Riedel, Oliver and Verl, Alexander}, booktitle = {2023 29th International Conference on Mechatronics and Machine Vision in Practice (M2VIP)}, doi = {10.1109/M2VIP58386.2023.10413388}, pages = {1-6}, title = {Isolating Shared Resources for Time-Triggered Networking of Containerized Applications}, url = {http://dx.doi.org/10.1109/M2VIP58386.2023.10413388}, year = 2023 }
  Link
  http://dx.doi.org/10.1109/M2VIP58386.2023.10413388
33. Walker, Moritz ; Fischer, Marc ; Lechler, Armin ; Verl, Alexander: Evaluation of Isolation and Communication Mechanisms for Real-Time Containers. In: 2023 IEEE 32nd International Symposium on Industrial Electronics (ISIE), 2023 IEEE 32nd International Symposium on Industrial Electronics (ISIE), 2023, S. 1–8
  - BibTeX
  - Link
  BibTeX
  @inproceedings{10228012, author = {Walker, Moritz and Fischer, Marc and Lechler, Armin and Verl, Alexander}, booktitle = {2023 IEEE 32nd International Symposium on Industrial Electronics (ISIE)}, doi = {10.1109/ISIE51358.2023.10228012}, pages = {1-8}, title = {Evaluation of Isolation and Communication Mechanisms for Real-Time Containers}, url = {http://dx.doi.org/10.1109/ISIE51358.2023.10228012}, year = 2023 }
  Link
  http://dx.doi.org/10.1109/ISIE51358.2023.10228012
34. Walker, Moritz ; Klingel, Lars ; Oechsle, Stefan ; Neubauer, Michael ; Lechler, Armin ; Verl, Alexander: Safeguarded Continuous Deployment of Control Containers through Real-Time Simulation. In: 2023 IEEE 28th International Conference on Emerging Technologies and Factory Automation (ETFA), 2023 IEEE 28th International Conference on Emerging Technologies and Factory Automation (ETFA), 2023, S. 1–8
  - BibTeX
  - Link
  BibTeX
  @inproceedings{10275659, author = {Walker, Moritz and Klingel, Lars and Oechsle, Stefan and Neubauer, Michael and Lechler, Armin and Verl, Alexander}, booktitle = {2023 IEEE 28th International Conference on Emerging Technologies and Factory Automation (ETFA)}, doi = {10.1109/ETFA54631.2023.10275659}, pages = {1-8}, title = {Safeguarded Continuous Deployment of Control Containers through Real-Time Simulation}, url = {http://dx.doi.org/10.1109/ETFA54631.2023.10275659}, year = 2023 }
  Link
  http://dx.doi.org/10.1109/ETFA54631.2023.10275659
35. Walker, Moritz ; Tasci, Timur ; Lechler, Armin ; Verl, Alexander: Analysis of Real-Time Execution Models for Container-Based Control Applications. In: . Bd. Advances in Automotive Production Technology – Towards Software-Defined Manufacturing and Resilient Supply Chains : Springer, 2023 — ISBN 978-3-031-27932-4, S. 14–24
  - BibTeX
  - Link
  BibTeX
  @inbook{inbook, author = {Walker, Moritz and Tasci, Timur and Lechler, Armin and Verl, Alexander}, doi = {10.1007/978-3-031-27933-1_2}, isbn = {978-3-031-27932-4}, month = {06}, pages = {14-24}, publisher = {Springer}, title = {Analysis of Real-Time Execution Models for Container-Based Control Applications}, url = {https://link.springer.com/chapter/10.1007/978-3-031-27933-1_2}, volume = { Advances in Automotive Production Technology – Towards Software-Defined Manufacturing and Resilient Supply Chains}, year = 2023 }
  Link
  https://link.springer.com/chapter/10.1007/978-3-031-27933-1_2
36. Walker, Moritz ; von Arnim, Christian ; Neubauer, Michael ; Lechler, Armin ; Riedel, Oliver ; Verl, Alexander: Reflection-based Prototyping Framework for OPC UA Servers for Companion Specifications. In: 2023 IEEE International Conference on Industrial Technology (ICIT), 2023 IEEE International Conference on Industrial Technology (ICIT), 2023, S. 1–6
  - BibTeX
  - Link
  BibTeX
  @inproceedings{10143130, author = {Walker, Moritz and von Arnim, Christian and Neubauer, Michael and Lechler, Armin and Riedel, Oliver and Verl, Alexander}, booktitle = {2023 IEEE International Conference on Industrial Technology (ICIT)}, doi = {10.1109/ICIT58465.2023.10143130}, pages = {1-6}, title = {Reflection-based Prototyping Framework for OPC UA Servers for Companion Specifications}, url = {https://doi.org/10.1109/ICIT58465.2023.10143130}, year = 2023 }
  Link
  https://doi.org/10.1109/ICIT58465.2023.10143130
37. Wnuk, Markus ; Zürn, Manuel ; Paukner, Matthias ; Ulbrich, Sascha ; Lechler, Armin ; Verl, Alexander: Case Study on Localization for Robotic Wire Harness Installation. In: Kiefl, N. ; Wulle, F. ; Ackermann, C. ; Holder, D. (Hrsg.) ; Kiefl, N. ; Wulle, F. ; Ackermann, C. ; Holder, D. (Hrsg.): Advances in Automotive Production Technology -- Towards Software-Defined Manufacturing and Resilient Supply Chains, Advances in Automotive Production Technology -- Towards Software-Defined Manufacturing and Resilient Supply Chains. Cham : Springer International Publishing, 2023 — ISBN 978-3-031-27933-1, S. 333--343
  - BibTeX
  BibTeX
  @inproceedings{10.1007/978-3-031-27933-1_31, abstract = {Wire harness installation is one of the most challenging processing steps for automation in automotive production. Wire harnesses have an infinite number of degrees of freedom, such that they change their shape continuously during manipulation. As of today, the human's ability to perceive the wire harness and deal with its shape changes, is unmatched by any technical solution. Therefore, wire harnesses are still installed manually. This paper proposes a concept for wire harness localization and applies it for robotic wire harness installation. The concept uses two stereo cameras, one to perceive the shape of the wire harness and obtain rough position estimates of wire harness components, and a second for accurate 6D pose estimation of the individual components. The concept is evaluated with a case study on localization in a car chassis, where the accuracy and limitations of the concept are investigated by practical experiments.}, address = {Cham}, author = {Wnuk, Markus and Zürn, Manuel and Paukner, Matthias and Ulbrich, Sascha and Lechler, Armin and Verl, Alexander}, booktitle = {Advances in Automotive Production Technology -- Towards Software-Defined Manufacturing and Resilient Supply Chains}, editor = {Kiefl, Niklas and Wulle, Frederik and Ackermann, Clemens and Holder, Daniel}, isbn = {978-3-031-27933-1}, pages = {333--343}, publisher = {Springer International Publishing}, title = {Case Study on Localization for Robotic Wire Harness Installation}, year = 2023 }
38. Wolf, Martin ; Maier, Vinzent ; Verl, Alexander: Method for the Calculation of Local Bead Volume in Multi-Axis Additive Manufacturing. In: Procedia CIRP, Procedia CIRP. Bd. 120 : Elsevier BV, 2023, S. 1244–1249
  - BibTeX
  - Link
  BibTeX
  @inproceedings{Wolf_2023, author = {Wolf, Martin and Maier, Vinzent and Verl, Alexander}, doi = {10.1016/j.procir.2023.09.156}, issn = {2212-8271}, journal = {Procedia CIRP}, pages = {1244–1249}, publisher = {Elsevier BV}, title = {Method for the Calculation of Local Bead Volume in Multi-Axis Additive Manufacturing}, url = {http://dx.doi.org/10.1016/j.procir.2023.09.156}, volume = 120, year = 2023 }
  Link
  http://dx.doi.org/10.1016/j.procir.2023.09.156
39. Xu, Haijia ; Hinze, Christoph ; Lechler, Armin ; Verl, Alexander: Robust µ parameterization with low tuning complexity of cascaded control for feed drives. In: Control Engineering Practice, Control Engineering Practice. Bd. 138, Elsevier BV (2023), S. 105607
  - BibTeX
  - Link
  BibTeX
  @article{Xu_2023, author = {Xu, Haijia and Hinze, Christoph and Lechler, Armin and Verl, Alexander}, doi = {10.1016/j.conengprac.2023.105607}, journal = {Control Engineering Practice}, month = {09}, pages = 105607, publisher = {Elsevier {BV}}, title = {Robust µ parameterization with low tuning complexity of cascaded control for feed drives}, url = {https://doi.org/10.1016%2Fj.conengprac.2023.105607}, volume = 138, year = 2023 }
  Link
  https://doi.org/10.1016%2Fj.conengprac.2023.105607
40. Zürn, Manuel ; Kienzlen, Annika ; Klingel, Lars ; Lechler, Armin ; Verl, Alexander ; Ren, Shiyi ; Xu, Weiliang: Deep Learning-Based Instance Segmentation for Feature Extraction of Branched Deformable Linear Objects for Robotic Manipulation. In: 2023 IEEE 19th International Conference on Automation Science and Engineering (CASE), 2023 IEEE 19th International Conference on Automation Science and Engineering (CASE), 2023, S. 1–6
  - BibTeX
  BibTeX
  @inproceedings{10260646, abstract = {Branched deformable linear objects, like wire harnesses, are vastly used in the electrical industry to interconnect multiple electronic components while allowing small relative motions. Their deformable nature gives them an infinite-dimensional configuration space, which is challenging for robotic manipulation and requires sensor feedback about the actual configuration. Cameras have been used before in automation attempts as sensor feedback of branched deformable linear objects. However, image processing is sensible to occlusions and unstructured environments. This paper presents a method of using deep learning-based instance segmentation networks to extract topological features like connectors, clips, branch points and overlapping points on the branched deformable linear object. The topological features originate from features that can be used for matching a stretched representation of the branched deformable linear object to its sensor representation. Our results show that the network is capable of extracting the features for different datasets with high accuracy. Furthermore, this paper evaluates the use of preliminary results in the training process to facilitate annotation by predicting the labels. For now, this paper only uses 2D images of the branched deformable linear objects. Future work will also use depth images, such that individual deformable linear object features, such as length or radius, can be extracted from the images. We anticipate the usage of wire harness automation with robotic manipulation, augmented reality support of the worker or quality control of wire harnesses.}, author = {Zürn, Manuel and Kienzlen, Annika and Klingel, Lars and Lechler, Armin and Verl, Alexander and Ren, Shiyi and Xu, Weiliang}, booktitle = {2023 IEEE 19th International Conference on Automation Science and Engineering (CASE)}, doi = {10.1109/CASE56687.2023.10260646}, issn = {2161-8089}, month = {08}, pages = {1-6}, title = {Deep Learning-Based Instance Segmentation for Feature Extraction of Branched Deformable Linear Objects for Robotic Manipulation}, year = 2023 }
41. Zürn, Manuel ; Wnuk, Markus ; Lechler, Armin ; Verl, Alexander: Topology Matching of Branched Deformable Linear Objects. In: 2023 IEEE International Conference on Robotics and Automation (ICRA), 2023 IEEE International Conference on Robotics and Automation (ICRA), 2023, S. 7097–7103
  - BibTeX
  BibTeX
  @inproceedings{10161483, abstract = {This paper presents a new method for correspondence estimation between a previously known topology of a branched deformable linear object and an image representation from a 3D stereo camera. Although frequently encountered in production, robotic deformable linear object manipulation still lacks reliable sensor feedback. Especially for branched deformable linear objects, such as wire harnesses, correspondence estimation is very challenging. Due to their flexible nature, they have an infinite-dimensional configuration space, such that visual appearances of the same object can vary strongly. Knowing the correspondence is vital for various applications, e.g., estimating valid grasping positions for robotic wire routing or augmented reality support for workers. Therefore, this paper presents a method for matching the topology of a branched deformable linear object to camera sensor data. Asymmetries in the wire harness design reduce the solution space by comparing the known topology of a model to the topology extracted from sensor data. The problem of finding the most likely solution to the matching problem requires features extracted from camera images. These features are used to construct a graph-based topology representation, which can then be matched to a graph-based topology representation of the known branched deformable linear object. The presented method is evaluated using multiple different non-overlapping configurations of a wire harness, showing the effectiveness of a graph-based segment matching approach.}, author = {Zürn, Manuel and Wnuk, Markus and Lechler, Armin and Verl, Alexander}, booktitle = {2023 IEEE International Conference on Robotics and Automation (ICRA)}, doi = {10.1109/ICRA48891.2023.10161483}, month = {05}, pages = {7097-7103}, title = {Topology Matching of Branched Deformable Linear Objects}, year = 2023 }
2022
1. Bubeck, Wolfgang ; Frick, Florian ; Verl, Alexander: Hardware-Accelerated Data Processing of Capacitive Sensor Arrays for Industrial and Service Robotic Applications. In: ISR Europe, ISR Europe. Bd. 54 (2022), S. 174–179 — ISBN 978-3-8007-5891-3
  - BibTeX
  - Link
  BibTeX
  @article{noauthororeditor, abstract = {To ensure a safe environment for human-machine interaction through signal processing and to process big data from intelligent production systems, increasingly powerful computational hardware is required. Central Processing Unit (CPU) based systems are reaching their load limits when processing large amounts of data. This paper presents a hardware-software architecture for Field Programmable Gate Array (FPGA) based platforms for high-frequency data evaluation using capacitive sensor arrays as an example. The architecture includes on the one hand a concept for hardware-acceler-ated sensor data processing and on the other hand the methodology for reading out capacitive sensor arrays. The focus is on simple and easily scalable electronics as well as a dynamic data processing module that can execute and deterministically process complex algorithms with large amount of data based on flexible rules using hardware acceleration. The presented concept was implemented on a FPGA based hardware platform. This allowed the signal processing of 100 sensor values with a resolution of 32 Bit each by 3 pipelined rules, a second order IIR-filter, a 10-times linear interpolation and an averaging algorithm at a task cycle of 1kHz. For the capacitance measurement validation, a custom developed Printed Circuit Board (PCB) with 6 channels is connected to the FPGA platform. It was shown to be capable of a robust and deterministic capacitance measurement at intervals of 1ms with capacitance values from Femto- to Nanofarad. Due to its easy scalability, the method can be used, for example, to completely cover a robotic arm similar to human skin, fully evaluate its measurement signals and therefore increases Human Machine Interaction (HMI).}, author = {Bubeck, Wolfgang and Frick, Florian and Verl, Alexander}, booktitle = {ISR Europe}, eventdate = {June 20 - 21 2022}, isbn = {978-3-8007-5891-3}, pages = {174-179}, title = {Hardware-Accelerated Data Processing of Capacitive Sensor Arrays for Industrial and Service Robotic Applications}, url = {https://ieeexplore.ieee.org/document/9861814}, volume = 54, year = 2022 }
  Link
  https://ieeexplore.ieee.org/document/9861814
2. Casalaro, Giuseppina Lucia ; Cattivera, Giulio ; Ciccozzi, Federico ; Malavolta, Ivano ; Wortmann, Andreas ; Pelliccione, Patrizio: Model-driven engineering for mobile robotic systems: a systematic mapping study. In: Software and Systems Modeling, Software and Systems Modeling. Bd. 21, Springer (2022), Nr. 1, S. 19--49
  - BibTeX
  BibTeX
  @article{casalaro2022model, author = {Casalaro, Giuseppina Lucia and Cattivera, Giulio and Ciccozzi, Federico and Malavolta, Ivano and Wortmann, Andreas and Pelliccione, Patrizio}, journal = {Software and Systems Modeling}, number = 1, pages = {19--49}, publisher = {Springer}, title = {Model-driven engineering for mobile robotic systems: a systematic mapping study}, volume = 21, year = 2022 }
3. Dietrich, David ; Neubauer, Michael ; Lechler, Armin ; Verl, Alexander: Fehlerfreie Produktion durch flexibilisierte Prozesse/Error-free production through flexible manufacturing processes – Change of planning and error compensation in software-defined manufacturing. In: wt Werkstattstechnik online, wt Werkstattstechnik online. Bd. 112, VDI Fachmedien GmbH and Co. KG (2022), Nr. 05, S. 276--281
  - BibTeX
  - Link
  BibTeX
  @article{Dietrich_2022, author = {Dietrich, David and Neubauer, Michael and Lechler, Armin and Verl, Alexander}, doi = {10.37544/1436-4980-2022-05-6}, journal = {wt Werkstattstechnik online}, number = 05, pages = {276--281}, publisher = {VDI Fachmedien GmbH and Co. KG}, title = {Fehlerfreie Produktion durch flexibilisierte Prozesse/Error-free production through flexible manufacturing processes {\textendash} Change of planning and error compensation in software-defined manufacturing}, url = {https://doi.org/10.37544%2F1436-4980-2022-05-6}, volume = 112, year = 2022 }
  Link
  https://doi.org/10.37544%2F1436-4980-2022-05-6
4. Elser, Anja ; Lechler, Armin ; Verl, Alexander: Implementation of Surface Interpolators for Compound Surfaces without C2-continuity. In: Procedia CIRP, Procedia CIRP. Bd. 109 : Elsevier BV, 2022, S. 19--24
  - BibTeX
  - Link
  BibTeX
  @inproceedings{Elser_2022, author = {Elser, Anja and Lechler, Armin and Verl, Alexander}, doi = {10.1016/j.procir.2022.05.208}, journal = {Procedia {CIRP}}, pages = {19--24}, publisher = {Elsevier {BV}}, title = {Implementation of Surface Interpolators for Compound Surfaces without C2-continuity}, url = {https://doi.org/10.1016%2Fj.procir.2022.05.208}, volume = 109, year = 2022 }
  Link
  https://doi.org/10.1016%2Fj.procir.2022.05.208
5. Fur, Shan ; Delonge, Nicolas ; Riedel, Oliver ; Verl, Alexander: Hybrid Commissioning of Industrial Plants: A Merge-Tool for PROFINET. In: 2022 IEEE 27th International Conference on Emerging Technologies and Factory Automation (ETFA), 2022 IEEE 27th International Conference on Emerging Technologies and Factory Automation (ETFA), 2022, S. 1–7
  - BibTeX
  BibTeX
  @inproceedings{9921686, author = {Fur, Shan and Delonge, Nicolas and Riedel, Oliver and Verl, Alexander}, booktitle = {2022 IEEE 27th International Conference on Emerging Technologies and Factory Automation (ETFA)}, doi = {10.1109/ETFA52439.2022.9921686}, pages = {1-7}, title = {Hybrid Commissioning of Industrial Plants: A Merge-Tool for PROFINET}, year = 2022 }
6. Jaensch, Florian ; Klingel, Lars ; Verl, Alexander: Virtual Commissioning Simulation as OpenAI Gym - A Reinforcement Learning Environment for Control Systems. In: 2022 5th International Conference on Artificial Intelligence for Industries (AI4I), 2022 5th International Conference on Artificial Intelligence for Industries (AI4I), 2022, S. 64–67
  - BibTeX
  BibTeX
  @inproceedings{10123668, abstract = {Manual development of control systems’ software is time-consuming and error-prone. Thus, high costs are already incurred in this phase of mechatronic system development. Virtual prototypes have so far only been used for testing purposes, such as virtual commissioning, but not for the automated creation of the control. A good test environment can also be extended to a learning environment with appropriate trial and error based algorithms. This work shows an approach to extend an industrial software tool for virtual commissioning as a standardized OpenAI gym environment. Thereby, established reinforcement learning algorithms can be used more easily and a step towards an industrial application of self-learning control systems can be made. The goal of this work is to provide industry and research with a platform for easy entry into the field of reinforcement learning.}, author = {Jaensch, Florian and Klingel, Lars and Verl, Alexander}, booktitle = {2022 5th International Conference on Artificial Intelligence for Industries (AI4I)}, doi = {10.1109/AI4I54798.2022.00023}, issn = {2770-4718}, month = {09}, pages = {64-67}, title = {Virtual Commissioning Simulation as OpenAI Gym - A Reinforcement Learning Environment for Control Systems}, year = 2022 }
7. Jaensch, Florian ; Kübler, Karl ; Schwarz, Elmar ; Verl, Alexander: Test-Driven Reward Function for Reinforcement Learning: A Contribution towards Applicable Machine Learning Algorithms for Production Systems. In: Procedia CIRP, Procedia CIRP. Bd. 112 (2022), S. 103–108. — 15th CIRP Conference on Intelligent Computation in ManufacturingEngineering, 14-16 July 2021
  - BibTeX
  - Link
  BibTeX
  @article{JAENSCH2022103, abstract = {Reinforcement Learning algorithms find more and more application in fields where complex tasks need to be solved. The automation of production systems is one of those fields. Normally, programming a control system defines the automation strategy. Previous contributions by the authors have shown that a so-called agent can learn automation strategies for production systems using a Reinforcement Learning setup. However, the development of the reward function for the agent can be challenging and needs Reinforcement Learning domain knowledge. This paper introduces a novel approach in combining Test-Driven Development with Reinforcement Learning in order to solve the problem of a suitable reward function. In the presented approach predefined test cases are used to derive rewards for the agent. The use of an automated test framework allows for continuous learning sequences until all test cases are passed. An application example of a robot cell is used to demonstrate the novel approach and verify its suitability and usability. The first application shows promising results for further examination towards more application scenarios.}, author = {Jaensch, Florian and Kübler, Karl and Schwarz, Elmar and Verl, Alexander}, doi = {https://doi.org/10.1016/j.procir.2022.09.043}, issn = {2212-8271}, journal = {Procedia CIRP}, note = {15th CIRP Conference on Intelligent Computation in ManufacturingEngineering, 14-16 July 2021}, pages = {103-108}, title = {Test-Driven Reward Function for Reinforcement Learning: A Contribution towards Applicable Machine Learning Algorithms for Production Systems}, url = {https://www.sciencedirect.com/science/article/pii/S2212827122011970}, volume = 112, year = 2022 }
  Link
  https://www.sciencedirect.com/science/article/pii/S2212827122011970
8. Jud, Oliver ; Helfesrieder, Nico ; Lechler, Armin ; Verl, Alexander: Vorspannungsnachstellung an Kugelgewindetrieben/Preload adjustment on ball screws – Methods for increasing service life due to automatic adjustment of preload force. In: wt Werkstattstechnik online, wt Werkstattstechnik online. Bd. 112, VDI Fachmedien GmbH and Co. KG (2022), Nr. 05, S. 282--287
  - BibTeX
  - Link
  BibTeX
  @article{Jud_2022, author = {Jud, Oliver and Helfesrieder, Nico and Lechler, Armin and Verl, Alexander}, doi = {10.37544/1436-4980-2022-05-12}, journal = {wt Werkstattstechnik online}, month = {05}, number = 05, pages = {282--287}, publisher = {{VDI} Fachmedien {GmbH} and Co. {KG}}, title = {Vorspannungsnachstellung an Kugelgewindetrieben/Preload adjustment on ball screws {\textendash} Methods for increasing service life due to automatic adjustment of preload force}, url = {https://doi.org/10.37544%2F1436-4980-2022-05-12}, volume = 112, year = 2022 }
  Link
  https://doi.org/10.37544%2F1436-4980-2022-05-12
9. Jud, Oliver ; Lechler, Armin ; Verl, Alexander: Vorspannung adaptiv nachstellen. In: konstruktionspraxis, konstruktionspraxis., Vogel Communications Group GmbH & Co. KG (2022) (2022), Nr. 08, S. 32–33
  - BibTeX
  - Link
  BibTeX
  @article{jud2022vorspannung, author = {Jud, Oliver and Lechler, Armin and Verl, Alexander}, journal = {konstruktionspraxis}, month = {08}, number = 08, pages = {32-33}, publisher = {Vogel Communications Group GmbH & Co. KG (2022)}, title = {Vorspannung adaptiv nachstellen}, url = {https://www.konstruktionspraxis.vogel.de/epaperarchiv/konstruktionspraxis_2022008/html5/index.html?pn=33}, year = 2022 }
  Link
  https://www.konstruktionspraxis.vogel.de/epaperarchiv/konstruktionspraxis_2022008/html5/index.html?pn=33
10. Kaiser, Benjamin ; Reichle, Alexander ; Verl, Alexander: Model-based automatic generation of digital twin models for the simulation of reconfigurable manufacturing systems for timber construction. In: Procedia CIRP, Procedia CIRP. Bd. 107 : Elsevier BV, 2022, S. 387--392
  - BibTeX
  - Link
  BibTeX
  @inproceedings{Kaiser_2022, author = {Kaiser, Benjamin and Reichle, Alexander and Verl, Alexander}, doi = {10.1016/j.procir.2022.04.063}, journal = {Procedia {CIRP}}, pages = {387--392}, publisher = {Elsevier {BV}}, title = {Model-based automatic generation of digital twin models for the simulation of reconfigurable manufacturing systems for timber construction}, url = {https://doi.org/10.1016%2Fj.procir.2022.04.063}, volume = 107, year = 2022 }
  Link
  https://doi.org/10.1016%2Fj.procir.2022.04.063
11. Kaiser, Benjamin ; Wolf, Martin ; Verl, Alexander: Modular Control Architecture for Reconfigurable Fabrication Systems for Prefabrication in Construction. In: ISR Europe 2022; 54th International Symposium on Robotics, ISR Europe 2022; 54th International Symposium on Robotics, 2022, S. 1–7
  - BibTeX
  BibTeX
  @inproceedings{9861808, author = {Kaiser, Benjamin and Wolf, Martin and Verl, Alexander}, booktitle = {ISR Europe 2022; 54th International Symposium on Robotics}, pages = {1-7}, title = {Modular Control Architecture for Reconfigurable Fabrication Systems for Prefabrication in Construction}, year = 2022 }
12. Kienzlen, Annika ; Jaensch, Florian ; Verl, Alexander ; Cheng, Leo: Concept for a Reinforcement Learning Approach to Navigate Catheters Through Blood Vessels. In: 2022 28th International Conference on Mechatronics and Machine Vision in Practice (M2VIP), 2022 28th International Conference on Mechatronics and Machine Vision in Practice (M2VIP), 2022
  - BibTeX
  - Link
  BibTeX
  @inproceedings{kienzlen2022concept, author = {Kienzlen, Annika and Jaensch, Florian and Verl, Alexander and Cheng, Leo}, booktitle = {2022 28th International Conference on Mechatronics and Machine Vision in Practice (M2VIP)}, doi = {10.1109/M2VIP55626.2022.10041096}, eventdate = {16-18 Nov. 2022}, eventtitle = {2022 28th International Conference on Mechatronics and Machine Vision in Practice (M2VIP)}, title = {Concept for a Reinforcement Learning Approach to Navigate Catheters Through Blood Vessels}, url = {https://doi.org/10.1109/M2VIP55626.2022.10041096}, year = 2022 }
  Link
  https://doi.org/10.1109/M2VIP55626.2022.10041096
13. Klingel, Lars ; Kamm, Valentin ; Verl, Alexander: Comparison and Application of Multi-Rate Methods for Real-Time Simulations of Production Systems. In: Proceedings of the 63rd International Conference of Scandinavian Simulation Society, Proceedings of the 63rd International Conference of Scandinavian Simulation Society, 2022
  - BibTeX
  - Link
  BibTeX
  @inproceedings{klingel2022multirate, author = {Klingel, Lars and Kamm, Valentin and Verl, Alexander}, booktitle = {Proceedings of the 63rd International Conference of Scandinavian Simulation Society}, doi = {https://doi.org/10.3384/ecp192008}, month = {09}, title = {Comparison and Application of Multi-Rate Methods for Real-Time Simulations of Production Systems}, url = {https://ecp.ep.liu.se/index.php/sims/article/view/492}, year = 2022 }
  Link
  https://ecp.ep.liu.se/index.php/sims/article/view/492
14. Klingel, Lars ; Penter, Lars ; Mayer, Philip ; Ihlenfeldt, Steffen ; Verl, Alexander: Digital Twins in deep drawing for virtual tool commissioning and inline parameter optimization. In: . Bd. IOP Conference Series: Materials Science and Engineering, 2022
  - BibTeX
  - Link
  BibTeX
  @conference{klingel2022digital, author = {Klingel, Lars and Penter, Lars and Mayer, Philip and Ihlenfeldt, Steffen and Verl, Alexander}, doi = {10.1088/1757-899X/1238/1/012072}, eventtitle = {International Deep-Drawing Research Group Conference (IDDRG 2022)}, title = {Digital Twins in deep drawing for virtual tool commissioning and inline parameter optimization}, url = {https://iopscience.iop.org/article/10.1088/1757-899X/1238/1/012072}, volume = {IOP Conference Series: Materials Science and Engineering}, year = 2022 }
  Link
  https://iopscience.iop.org/article/10.1088/1757-899X/1238/1/012072
15. Kovaleva, Daria ; Nistler, Maximilian ; Blandini, Lucio ; Sobek, Werner ; Verl, Alexander: Rezyklierbare Sandschalungen – Auf dem Weg zur Kreislaufproduktion leichter Betonbauteile. In: Beton- und Stahlbetonbau, Beton- und Stahlbetonbau. Bd. 117, Wiley (2022), Nr. 5, S. 333--342
  - BibTeX
  - Link
  BibTeX
  @article{Kovaleva_2022, author = {Kovaleva, Daria and Nistler, Maximilian and Blandini, Lucio and Sobek, Werner and Verl, Alexander}, doi = {10.1002/best.202200009}, journal = {Beton- und Stahlbetonbau}, month = {04}, number = 5, pages = {333--342}, publisher = {Wiley}, title = {Rezyklierbare Sandschalungen {\textendash} Auf dem Weg zur Kreislaufproduktion leichter Betonbauteile}, url = {https://doi.org/10.1002%2Fbest.202200009}, volume = 117, year = 2022 }
  Link
  https://doi.org/10.1002%2Fbest.202200009
16. Kovaleva, Daria ; Nistler, Maximilian ; Verl, Alexander ; Blandini, Lucio ; Sobek, Werner: Zero-Waste Production of Lightweight Concrete Structures with Water-Soluble Sand Formwork. In: Buswell, R. ; Blanco, A. ; Cavalaro, S. ; Kinnell, P. (Hrsg.) ; Buswell, R. ; Blanco, A. ; Cavalaro, S. ; Kinnell, P. (Hrsg.): Proceedings of the 3rd RILEM International Conference on Digital Fabrication with Concrete (Digital Concrete 2022), Proceedings of the 3rd RILEM International Conference on Digital Fabrication with Concrete (Digital Concrete 2022). Cham : Springer International Publishing, 2022 — ISBN 978-3-031-06116-5, S. 3--8
  - BibTeX
  BibTeX
  @inproceedings{10.1007/978-3-031-06116-5_1, abstract = {In the face of climate change and resource crisis, the construction industry can contribute to sustainable economic development by reducing its material consumption, emissions and waste. The application of lightweight construction principles in combination with circular production processes offers a comprehensive approach to this problem. The newly developed zero-waste formwork production method, based on the additive manufacturing of water-soluble sand mixture, enables to produce geometrically complex concrete structures and to reuse formwork material repeatedly in production cycles. This paper demonstrates the potential of this method for the production of the topologically optimised concrete single-span beam with spatial lattice structure (Fig. 1). First, a brief overview of the method will be given, followed then by a description of the design and production of the concrete component under the consideration of production parameters.}, address = {Cham}, author = {Kovaleva, Daria and Nistler, Maximilian and Verl, Alexander and Blandini, Lucio and Sobek, Werner}, booktitle = {Proceedings of the 3rd RILEM International Conference on Digital Fabrication with Concrete (Digital Concrete 2022)}, editor = {Buswell, Richard and Blanco, Ana and Cavalaro, Sergio and Kinnell, Peter}, isbn = {978-3-031-06116-5}, pages = {3--8}, publisher = {Springer International Publishing}, title = {Zero-Waste Production of Lightweight Concrete Structures with Water-Soluble Sand Formwork}, year = 2022 }
17. Littfinski, Daniel ; Verl, Alexander: Virtual Reality in der Steuerungstechnik. In: KG, V. F. G. & Co. (Hrsg.) wt Werkstattstechnik online, wt Werkstattstechnik online. Bd. 112 (2022), Nr. 09, S. 552–558
  - BibTeX
  BibTeX
  @article{littfinski2022virtual, author = {Littfinski, Daniel and Verl, Alexander}, doi = {doi.org/10.37544/1436-4980-2022-09}, editor = {KG, VDI Fachmedien GmbH & Co.}, journal = {wt Werkstattstechnik online}, month = {09}, number = 09, pages = {552-558}, title = {Virtual Reality in der Steuerungstechnik}, volume = 112, year = 2022 }
18. Lässig, Nico ; Herschel, Melanie ; Reichle, Alexander ; Ellwein, Carsten ; Verl, Alexander: The ArchIBALD Data Integration Platform: Bridging Fragmented Processes in the Building Industry. In: De Weerdt, J. ; Polyvyanyy, A. (Hrsg.) ; De Weerdt, J. ; Polyvyanyy, A. (Hrsg.): Intelligent Information Systems, Intelligent Information Systems : Springer International Publishing, 2022 — ISBN 978-3-031-07481-3, S. 45--54
  - BibTeX
  BibTeX
  @inproceedings{10.1007/978-3-031-07481-3_6, author = {L{\"a}ssig, Nico and Herschel, Melanie and Reichle, Alexander and Ellwein, Carsten and Verl, Alexander}, booktitle = {Intelligent Information Systems}, editor = {De Weerdt, Jochen and Polyvyanyy, Artem}, isbn = {978-3-031-07481-3}, pages = {45--54}, publisher = {Springer International Publishing}, title = {The ArchIBALD Data Integration Platform: Bridging Fragmented Processes in the Building Industry}, year = 2022 }
19. Mesmer, Patrick ; Hinze, Christoph ; Lechler, Armin ; Verl, Alexander: Gain-Scheduled Drive-based Damping Control for Industrial Robots. In: 2022 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM), 2022 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM), 2022, S. 1706–1713
  - BibTeX
  BibTeX
  @inproceedings{9863417, abstract = {The drivetrain flexibility of industrial robots limits their accuracy. To open up new areas of application for industrial robots, an increased dynamic path accuracy has to be obtained. Therefore, this paper addresses this issue by a gain-scheduled drive-based damping control for industrial robots with secondary encoders. For this purpose, a linear parameter-varying (LPV) model is derived as well as a system identification method is presented. Based on this, a gain-scheduled drive-based LPV damping control design is proposed, which guarantees stability and performance under variation of the manipulator configuration. The control performance of the approach is experimentally validated for the three base joints of a KUKA KR210-2 industrial robot. The approach realizes a trade-off between ease of implementation and control performance as well as robustness.}, author = {Mesmer, Patrick and Hinze, Christoph and Lechler, Armin and Verl, Alexander}, booktitle = {2022 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM)}, doi = {10.1109/AIM52237.2022.9863417}, issn = {2159-6255}, month = {07}, pages = {1706-1713}, title = {Gain-Scheduled Drive-based Damping Control for Industrial Robots}, year = 2022 }
20. Mesmer, Patrick ; Lechler, Armin ; Verl, Alexander: Genauigkeit von Robotern steigern. In: INDUSTRIAL Production, INDUSTRIAL Production. Bd. 11/2022 (2022), S. 46–47
  - BibTeX
  BibTeX
  @article{mesmer2022genauigkeit, author = {Mesmer, Patrick and Lechler, Armin and Verl, Alexander}, journal = {INDUSTRIAL Production}, pages = {46-47}, title = {Genauigkeit von Robotern steigern}, volume = {11/2022}, year = 2022 }
21. Mesmer, Patrick ; Lechler, Armin ; Verl, Alexander: Sensorlose Hysteresekompensation von Industrierobotern. In: GmbH, V. F. (Hrsg.) antriebstechnik, antriebstechnik. Bd. 08/2022 (2022), S. 40–42
  - BibTeX
  BibTeX
  @article{mesmer2022sensorlose, author = {Mesmer, Patrick and Lechler, Armin and Verl, Alexander}, editor = {GmbH, Vereinigte Fachverlage}, journal = {antriebstechnik}, month = {08}, pages = {40-42}, title = {Sensorlose Hysteresekompensation von Industrierobotern}, volume = {08/2022}, year = 2022 }
22. Mesmer, Patrick ; Nagel, Patrick ; Lechler, Armin ; Verl, Alexander: Modeling and Identification of Hysteresis in Robot Joints with Cycloidal Drives. In: 2022 IEEE 17th International Conference on Advanced Motion Control (AMC), 2022 IEEE 17th International Conference on Advanced Motion Control (AMC), 2022, S. 358–363
  - BibTeX
  BibTeX
  @inproceedings{9729274, abstract = {Cycloidal drives (CDs) are precision transmissions that are often installed in the joints of industrial robots (IRs) with high payloads. It is well known that the hysteresis behavior of the CDs has a significant influence on the dynamic path accuracy of IRs. In contrast to harmonic drives (HDs), which are commonly used in lightweight robots, less literature has been published on the dynamic behavior of robot joints with CDs. Thus, this paper investigates the hysteresis behavior of robot joints with CDs. For the representation of the hysteresis behavior, a nonlinear auto-regressive with exogenous inputs (NARX) model is proposed and compared to a Bouc-Wen model. Both, the data-driven NARX and the Bouc-Wen model are investigated experimentally in terms of their capability for representing the hysteresis behavior of CDs. The quality of the models is validated using a laboratory setup that mimics the drivetrain of a robot joint of the high payload class.}, author = {Mesmer, Patrick and Nagel, Patrick and Lechler, Armin and Verl, Alexander}, booktitle = {2022 IEEE 17th International Conference on Advanced Motion Control (AMC)}, doi = {10.1109/AMC51637.2022.9729274}, issn = {1943-6580}, month = {02}, pages = {358-363}, title = {Modeling and Identification of Hysteresis in Robot Joints with Cycloidal Drives}, year = 2022 }
23. Mesmer, Patrick ; Neubauer, Michael ; Lechler, Armin ; Verl, Alexander: Robust design of independent joint control of industrial robots with secondary encoders. In: Robotics and Computer-Integrated Manufacturing, Robotics and Computer-Integrated Manufacturing. Bd. 73, Elsevier BV (2022), S. 102232
  - BibTeX
  - Link
  BibTeX
  @article{Mesmer_2022, author = {Mesmer, Patrick and Neubauer, Michael and Lechler, Armin and Verl, Alexander}, doi = {10.1016/j.rcim.2021.102232}, journal = {Robotics and Computer-Integrated Manufacturing}, month = {02}, pages = 102232, publisher = {Elsevier {BV}}, title = {Robust design of independent joint control of industrial robots with secondary encoders}, url = {https://doi.org/10.1016%2Fj.rcim.2021.102232}, volume = 73, year = 2022 }
  Link
  https://doi.org/10.1016%2Fj.rcim.2021.102232
24. Mesmer, Patrick ; Riedel, Patrick ; Lechler, Armin ; Verl, Alexander: Investigation and Compensation of Hysteresis in Robot Joints with Cycloidal Drives. In: Schüppstuhl, T. ; Tracht, K. ; Fleischer, J. (Hrsg.) ; Schüppstuhl, T. ; Tracht, K. ; Fleischer, J. (Hrsg.): Annals of Scientific Society for Assembly, Handling and Industrial Robotics, Annals of Scientific Society for Assembly, Handling and Industrial Robotics. Berlin, Heidelberg : Springer Berlin Heidelberg, 2022, S. angenommen, noch nicht veröffentlicht
  - BibTeX
  BibTeX
  @inproceedings{mesmer2023investigation, address = {Berlin, Heidelberg}, author = {Mesmer, Patrick and Riedel, Patrick and Lechler, Armin and Verl, Alexander}, booktitle = {Annals of Scientific Society for Assembly, Handling and Industrial Robotics}, editor = {Sch{\"u}ppstuhl, Thorsten and Tracht, Kirsten and Fleischer, J{\"u}rgen}, pages = {angenommen, noch nicht veröffentlicht}, publisher = {Springer Berlin Heidelberg}, title = {Investigation and Compensation of Hysteresis in Robot Joints with Cycloidal Drives}, year = 2022 }
25. Neher, Philipp ; Lechler, Armin ; Verl, Alexander: Experimental Evaluation of the Deterministic Wireless Communication System Industrial LTE. In: 2022 8th International Conference on Mechatronics and Robotics Engineering (ICMRE), 2022 8th International Conference on Mechatronics and Robotics Engineering (ICMRE) : Institute of Electrical and Electronics Engineers Inc., 2022 — ISBN 9781665483773, S. 157–162
  - BibTeX
  - Link
  BibTeX
  @inproceedings{9734108, abstract = {The demand for highly customized products will be met in the future by smart and flexible factories. Future factories will rise to this challenge by employing stationary and mobile Cyber Physical Systems (CPS) which need to exchange various information. With mobile systems, this should be done wirelessly. This paper evaluates a previously proposed concept for a deterministic wireless communication system based on LTE. The concept combines LTE for data transmission with GPS for time synchronization and a time-based control scheme to enable a deterministic exchange of control information. To conduct experimental evaluation, an implementation of the concept is necessary. A prototypical implementation using off-the-shelf hardware and custom software is presented. Using two exemplary test cases, the concept and implementation are evaluated with regard to the overall system latency and the quality of the time synchronization of the internal clocks. The level of synchronicity of coordinated output values after transmitting the corresponding set-point values over the communication system is evaluated in another exemplary test case using a total of three communication end devices. With a measured maximum offset of 814 &#x00B5;s between the synchronized output of two receivers, the concept and implementation stand validated and deemed feasible.}, author = {Neher, Philipp and Lechler, Armin and Verl, Alexander}, booktitle = {2022 8th International Conference on Mechatronics and Robotics Engineering (ICMRE)}, doi = {10.1109/ICMRE54455.2022.9734108}, eventdate = {10.02.2022-12.02.2022}, isbn = {9781665483773}, language = {English}, month = {02}, pages = {157-162}, publisher = {Institute of Electrical and Electronics Engineers Inc.}, title = {Experimental Evaluation of the Deterministic Wireless Communication System Industrial LTE}, url = {http://icmre.org/}, venue = {Virtual, Munich, Germany}, year = 2022 }
  Link
  http://icmre.org/
26. Neher, Philipp ; Lechler, Armin ; Verl, Alexander: Identification and Classification of the Communication Data of Automated Guided Vehicles and Autonomous Mobile Robots. In: 2022 8th International Conference on Automation, Robotics and Applications (ICARA), 2022 8th International Conference on Automation, Robotics and Applications (ICARA) : Institute of Electrical and Electronics Engineers Inc., 2022 — ISBN 9781665483834, S. 68–75
  - BibTeX
  - Link
  BibTeX
  @inproceedings{9738572, abstract = {Automated guided vehicles and autonomous mobile robots will be a key technology in the factories of the future. They supply the necessary flexibility for smart factories which produce individualized products with lot sizes down to one. With the increased number of tasks for automated guided vehicles, the requirements for their wireless communication systems become more demanding and current solutions won&#x2019;t be sufficient anymore. To efficiently develop, configure and setup communication systems, the knowledge about what type of information is communicated and what are the characteristics of the information communicated is necessary. This work identifies most relevant types of information in an automated guided vehicle system based on a set of use-cases. For each identified information type, an estimate for the communication properties (payload size, cycle-time and latency) is given. The information types are then classified into traffic types for further use to design a wireless communication system.}, author = {Neher, Philipp and Lechler, Armin and Verl, Alexander}, booktitle = {2022 8th International Conference on Automation, Robotics and Applications (ICARA)}, doi = {10.1109/ICARA55094.2022.9738572}, eventdate = {18.02.2022-20.02.2022}, isbn = {9781665483834}, issn = {2767-7745}, language = {en}, month = {02}, pages = {68-75}, publisher = {Institute of Electrical and Electronics Engineers Inc.}, title = {Identification and Classification of the Communication Data of Automated Guided Vehicles and Autonomous Mobile Robots}, url = {http://www.icara.us/2022.html}, venue = {Virtual, Online, Czech republic}, year = 2022 }
  Link
  http://www.icara.us/2022.html
27. Neubauer, Michael ; Frick, Florian ; Ellwein, Carsten ; Lechler, Armin ; Verl, Alexander: Software-defined Manufacturing - Ein Paradigmenwechsel für die industrielle Produktion. In: wt Werkstatttechnik online, wt Werkstatttechnik online. Bd. 112 (2022), Nr. 6, S. 383–389
  - BibTeX
  BibTeX
  @article{neubauer2022softwaredefined, abstract = {Software-defined manufacturing (SDM) überträgt den Ansatz der Trennung von Anwendungen und unterlagerten Systemen, welcher ein entscheidendes Paradigma und Erfolgsfaktor für die Digitalisierung in vielen Branchen ist, auf die industrielle Produktion. Neben einer gesteigerten Integration von IT und OT können so die Produktionsprozesse einer gesamten Fabrik dynamisch durch Software anpasst werden. Ziel dieses Beitrags ist es, den SDM-Ansatz und die zur Umsetzung notwendigen Konzepte hinsichtlich technologischer Infrastruktur und Abstraktionsschicht vorzustellen. Anhand von zwei Use Cases werden die sich daraus ergebenden Potenziale aufgezeigt.}, author = {Neubauer, Michael and Frick, Florian and Ellwein, Carsten and Lechler, Armin and Verl, Alexander}, doi = {10.37544/1436–4980–2022–6–33}, journal = {wt Werkstatttechnik online}, month = {06}, number = 6, pages = {383-389}, title = {Software-defined Manufacturing - Ein Paradigmenwechsel für die industrielle Produktion}, volume = 112, year = 2022 }
28. Nistler, Maximilian ; Kovaleva, Daria ; Tepper, Louis ; Blandini, Lucio ; Sobek, Werner ; Verl, Alexander: Camera-based Process Monitoring for Powder Bed Additive Manufacturing in Construction. In: Procedia CIRP, Procedia CIRP. Bd. 107 : Elsevier BV, 2022, S. 534--539
  - BibTeX
  - Link
  BibTeX
  @inproceedings{Nistler_2022, author = {Nistler, Maximilian and Kovaleva, Daria and Tepper, Louis and Blandini, Lucio and Sobek, Werner and Verl, Alexander}, doi = {10.1016/j.procir.2022.05.021}, journal = {Procedia {CIRP}}, pages = {534--539}, publisher = {Elsevier {BV}}, title = {Camera-based Process Monitoring for Powder Bed Additive Manufacturing in Construction}, url = {https://doi.org/10.1016%2Fj.procir.2022.05.021}, volume = 107, year = 2022 }
  Link
  https://doi.org/10.1016%2Fj.procir.2022.05.021
29. Reichenbach, Thomas ; Trautwein, Felix ; Pott, Andreas ; Verl, Alexander: Parallele Seilroboter: Endlose Rotation durch Hybridstruktur. In: Bertram, T. ; Corves, B. ; Janschek, K. ; Rinderknecht, S. (Hrsg.) Fachtagung VDI MECHATRONIK 2022, Fachtagung VDI MECHATRONIK 2022. (2022)
  - BibTeX
  - Link
  BibTeX
  @article{https://doi.org/10.26083/tuprints-00020963, author = {Reichenbach, Thomas and Trautwein, Felix and Pott, Andreas and Verl, Alexander}, copyright = {Creative Commons Attribution 4.0 International}, doi = {10.26083/TUPRINTS-00020963}, editor = {Bertram, Torsten and Corves, Burkhard and Janschek, Klaus and Rinderknecht, Stephan}, journal = {Fachtagung VDI MECHATRONIK 2022}, title = {Parallele Seilroboter: Endlose Rotation durch Hybridstruktur}, url = {https://tuprints.ulb.tu-darmstadt.de/id/eprint/20963}, year = 2022 }
  Link
  https://tuprints.ulb.tu-darmstadt.de/id/eprint/20963
30. Reichle, Alexander ; Ellwein, Carsten ; Verl, Alexander: Adaptive CAM planning to support co-design in the building industry. In: Anwer, N. (Hrsg.) ; Anwer, N. (Hrsg.): Procedia CIRP, Procedia CIRP. Bd. 109. Elsevier BV, 2022, S. 78–83
  - BibTeX
  - Link
  BibTeX
  @inproceedings{reichle2022adaptive, address = {Elsevier {BV}}, author = {Reichle, Alexander and Ellwein, Carsten and Verl, Alexander}, doi = {10.1016/j.procir.2022.05.217}, editor = {Anwer, Nabil}, journal = {Procedia {CIRP}}, pages = {78-83}, title = {Adaptive CAM planning to support co-design in the building industry}, url = {https://doi.org/10.1016/j.procir.2022.05.217}, volume = 109, year = 2022 }
  Link
  https://doi.org/10.1016/j.procir.2022.05.217
31. Schmucker, Benedikt ; Trautwein, Felix ; Hartl, Roman ; Lechler, Armin ; Zaeh, Michael F. ; Verl, Alexander: Online Parameterization of a Milling Force Model using an Intelligent System Architecture and Bayesian Optimization. In: Procedia CIRP, Procedia CIRP. Bd. 107, Elsevier BV (2022), S. 1041--1046
  - BibTeX
  - Link
  BibTeX
  @article{Schmucker_2022, author = {Schmucker, Benedikt and Trautwein, Felix and Hartl, Roman and Lechler, Armin and Zaeh, Michael F. and Verl, Alexander}, doi = {10.1016/j.procir.2022.05.105}, journal = {Procedia {CIRP}}, pages = {1041--1046}, publisher = {Elsevier {BV}}, title = {Online Parameterization of a Milling Force Model using an Intelligent System Architecture and Bayesian Optimization}, url = {https://doi.org/10.1016%2Fj.procir.2022.05.105}, volume = 107, year = 2022 }
  Link
  https://doi.org/10.1016%2Fj.procir.2022.05.105
32. Schulte, Alexander ; Lechler, Armin ; Verl, Alexander: Impact Actuator for Increased Dynamics. In: IECON 2022 – 48th Annual Conference of the IEEE Industrial Electronics Society, IECON 2022 – 48th Annual Conference of the IEEE Industrial Electronics Society, 2022, S. 1–6
  - BibTeX
  BibTeX
  @inproceedings{9968593, abstract = {This article investigates the use of impuls transfer during mechanical impacts for the acceleration of feed axes. For this purpose, additional masses are attached to linear axes and moved by an actuator. Very high accelerations can be obtained by impacts with a defined velocity on contact surfaces. Thus, almost abrupt velocity changes can be achieved on the main drives. To enable driving through corners with constant path velocity, the concept consists of a cross table with two axis equiped with an impact actuator each. Investigations are carried out by using a reference contour and the results are compared with existing strategies for adjusting the corners.}, author = {Schulte, Alexander and Lechler, Armin and Verl, Alexander}, booktitle = {IECON 2022 – 48th Annual Conference of the IEEE Industrial Electronics Society}, doi = {10.1109/IECON49645.2022.9968593}, issn = {2577-1647}, month = {10}, pages = {1-6}, title = {Impact Actuator for Increased Dynamics}, year = 2022 }
33. Schütz, Andreas ; Lechler, Armin ; Verl, Alexander: Modelling for Control of Vacuum Grippers in automatically reconfigurable Fixturing Systems for thin-walled Workpieces. In: Procedia CIRP, Procedia CIRP. Bd. 115 (2022), S. 226–231
  - BibTeX
  - Link
  BibTeX
  @article{noauthororeditor, author = {Schütz, Andreas and Lechler, Armin and Verl, Alexander}, doi = {10.1016/j.procir.2022.10.078}, journal = {Procedia CIRP}, pages = {226-231}, title = {Modelling for Control of Vacuum Grippers in automatically reconfigurable Fixturing Systems for thin-walled Workpieces}, url = {https://www.sciencedirect.com/science/article/pii/S221282712201513X}, volume = 115, year = 2022 }
  Link
  https://www.sciencedirect.com/science/article/pii/S221282712201513X
34. Verl, Alexander ; Steinle, Lukas: Adaptive compensation of the transmission errors in rack-and-pinion drives. In: Technology, C. A. M. (Hrsg.) CIRP Annals, CIRP Annals. Bd. 71, Elsevier BV (2022), Nr. 1, S. 345--348
  - BibTeX
  - Link
  BibTeX
  @article{Verl_2022, author = {Verl, Alexander and Steinle, Lukas}, doi = {10.1016/j.cirp.2022.03.026}, editor = {Technology, CIRP Annals Manufacturing}, journal = {{CIRP} Annals}, number = 1, pages = {345--348}, publisher = {Elsevier {BV}}, title = {Adaptive compensation of the transmission errors in rack-and-pinion drives}, url = {https://doi.org/10.1016%2Fj.cirp.2022.03.026}, volume = 71, year = 2022 }
  Link
  https://doi.org/10.1016%2Fj.cirp.2022.03.026
35. von Bergen, Timm ; Hert, Christian ; Röck, Sascha ; Klingel, Lars ; Jaensch, Florian ; Verl, Alexander: Simulationsgestützter Betrieb von Indoor-Flugrobotern. In: wt Werkstattstechnik online, wt Werkstattstechnik online. Bd. 112, VDI Fachmedien GmbH and Co. KG (2022), Nr. 05, S. 309–313
  - BibTeX
  - Link
  BibTeX
  @article{vonbergen2022simulationsgesttzter, author = {von Bergen, Timm and Hert, Christian and Röck, Sascha and Klingel, Lars and Jaensch, Florian and Verl, Alexander}, doi = {doi.org/10.37544/1436-4980-2022-05}, journal = {wt Werkstattstechnik online}, number = 05, pages = {309-313}, publisher = {VDI Fachmedien GmbH and Co. KG}, title = {Simulationsgestützter Betrieb von Indoor-Flugrobotern}, url = {https://elibrary.vdi-verlag.de/10.37544/1436-4980-2022-05/wt-werkstattstechnik-online-jahrgang-112-2022-heft-05}, volume = 112, year = 2022 }
  Link
  https://elibrary.vdi-verlag.de/10.37544/1436-4980-2022-05/wt-werkstattstechnik-online-jahrgang-112-2022-heft-05
36. Wolf, Martin ; Kaiser, Benjamin ; Hügle, Sebastian ; Verl, Alexander ; Middendorf, Peter: Data Model for Adaptive Robotic Construction in Architecture. In: Procedia CIRP, Procedia CIRP. Bd. 107 : Elsevier BV, 2022, S. 1035–1040
  - BibTeX
  - Link
  BibTeX
  @inproceedings{Wolf_2022, author = {Wolf, Martin and Kaiser, Benjamin and Hügle, Sebastian and Verl, Alexander and Middendorf, Peter}, doi = {10.1016/j.procir.2022.05.104}, issn = {2212-8271}, journal = {Procedia CIRP}, pages = {1035–1040}, publisher = {Elsevier BV}, title = {Data Model for Adaptive Robotic Construction in Architecture}, url = {http://dx.doi.org/10.1016/j.procir.2022.05.104}, volume = 107, year = 2022 }
  Link
  http://dx.doi.org/10.1016/j.procir.2022.05.104
37. Wulle, Frederik ; Gorke, Oliver ; Schmidt, Sarah ; Nistler, Maximilian ; Tovar, Günter E.M. ; Riedel, Oliver ; Verl, Alexander ; Weber, Achim ; u. a.: Multi-axis 3D printing of gelatin methacryloyl hydrogels on a non-planar surface obtained from magnetic resonance imaging. In: Additive Manufacturing, Additive Manufacturing. Bd. 50, Elsevier BV (2022), S. 102566
  - BibTeX
  - Link
  BibTeX
  @article{Wulle_2022, author = {Wulle, Frederik and Gorke, Oliver and Schmidt, Sarah and Nistler, Maximilian and Tovar, Günter E.M. and Riedel, Oliver and Verl, Alexander and Weber, Achim and Southan, Alexander}, doi = {10.1016/j.addma.2021.102566}, journal = {Additive Manufacturing}, month = {02}, pages = 102566, publisher = {Elsevier {BV}}, title = {Multi-axis 3D printing of gelatin methacryloyl hydrogels on a non-planar surface obtained from magnetic resonance imaging}, url = {https://doi.org/10.1016%2Fj.addma.2021.102566}, volume = 50, year = 2022 }
  Link
  https://doi.org/10.1016%2Fj.addma.2021.102566
38. Zürn, Manuel ; Wnuk, Markus ; Lechler, Armin ; Verl, Alexander: Software Architecture For Deformable Linear Object Manipulation: A Shape Manipulation Case Study. In: 2022 IEEE/ACM 4th International Workshop on Robotics Software Engineering (RoSE), 2022 IEEE/ACM 4th International Workshop on Robotics Software Engineering (RoSE), 2022, S. 9–16
  - BibTeX
  BibTeX
  @inproceedings{9814824, author = {Zürn, Manuel and Wnuk, Markus and Lechler, Armin and Verl, Alexander}, booktitle = {2022 IEEE/ACM 4th International Workshop on Robotics Software Engineering (RoSE)}, doi = {10.1145/3526071.3527520}, pages = {9-16}, title = {Software Architecture For Deformable Linear Object Manipulation: A Shape Manipulation Case Study}, year = 2022 }
39. Zürn, Manuel ; Wnuk, Markus ; Schneider, Anja ; Lechler, Armin ; Verl, Alexander: Localization and Tracking of Deformable Linear Objects with Self Organizing Maps. In: Proceedings of the 54th International Symposium on Robotics (ISR), Proceedings of the 54th International Symposium on Robotics (ISR), 2022, S. 17–25
  - BibTeX
  BibTeX
  @inproceedings{zurn2022localization, author = {Zürn, Manuel and Wnuk, Markus and Schneider, Anja and Lechler, Armin and Verl, Alexander}, booktitle = {Proceedings of the 54th International Symposium on Robotics (ISR)}, pages = {17-25}, title = {Localization and Tracking of Deformable Linear Objects with Self Organizing Maps}, year = 2022 }
2021
1. Brenner, Felix ; Lechler, Armin ; Verl, Alexander: Acceleration-based disturbance compensation for elastic rack-and-pinion drives. In: Production Engineering - Research and Development, Production Engineering - Research and Development. (2021)
  - BibTeX
  - Link
  BibTeX
  @article{Brenner2021, abstract = {Rack-and-pinion drives are mainly used for large machine tools and are often operated with indirect position control. Due to the lack of state information on the output side, this results in reduced accuracy regarding the table position. In addition, the system can only react inadequately to disturbances outside the control loop, meaning that often insufficient results can be achieved in typical application scenarios such as milling. To meet the increasing dynamic and accuracy requirements of the modern manufacturing industry, this paper presents a highly dynamic acceleration-based disturbance compensation method. For this purpose, the table acceleration is estimated using a dynamical model of the drive train and compared to the signal from an additional acceleration sensor attached to the machine table. Based on the resulting difference, an additional compensation torque is provided, which suppresses the disturbance in counterphase. The approach is tested experimentally on an open control platform with industrial drive components and the behavior is investigated based on compliance frequency responses and externally applied milling forces. At the same time, a standardized parametrization methodology is developed and the robustness is evaluated by varying table masses. In summary, a considerable improvement of the dynamic disturbance behavior can be achieved compared to the conventional system without compensator.}, author = {Brenner, Felix and Lechler, Armin and Verl, Alexander}, day = 19, doi = {10.1007/s11740-021-01068-w}, issn = {1863-7353}, journal = {Production Engineering - Research and Development}, month = {07}, title = {Acceleration-based disturbance compensation for elastic rack-and-pinion drives}, url = {https://doi.org/10.1007/s11740-021-01068-w}, year = 2021 }
  Link
  https://doi.org/10.1007/s11740-021-01068-w
2. Brenner, Felix ; Lechler, Armin ; Verl, Alexander: Störgrößenkompensation für Vorschubantriebe. In: vdi fachmedien (Hrsg.) wt Werkstattstechnik online, wt Werkstattstechnik online. Bd. 111 (2021), Nr. 1, S. 82–87
  - BibTeX
  BibTeX
  @article{noauthororeditor, abstract = {Zahnstange-Ritzel-Antriebe werden überwiegend bei großen Werkzeugmaschinen eingesetzt und häufig mit indirekter Lageregelung betrieben. Hieraus resultiert eine geringe Positioniergenauigkeit und ein unzureichendes dynamisches Nachgiebigkeitsverhalten. Um den hohen Genauigkeitsanforderungen moderner Werkzeugmaschinen gerecht zu werden, wird in diesem Beitrag eine beschleunigungsbasierte Störgrößenkompensation vorgestellt. Experimentelle Ergebnisse belegen eine Verbesserung des Störverhaltens}, author = {Brenner, Felix and Lechler, Armin and Verl, Alexander}, editor = {vdi fachmedien}, journal = {wt Werkstattstechnik online}, number = 1, pages = {82-87}, title = {Störgrößenkompensation für Vorschubantriebe}, volume = 111, year = 2021 }
3. Casalaro, Giuseppina Lucia ; Cattivera, Giulio ; Ciccozzi, Federico ; Malavolta, Ivano ; Wortmann, Andreas ; Pelliccione, Patrizio: Model-driven engineering for mobile robotic systems: a systematic mapping study. In: Software and Systems Modeling, Software and Systems Modeling., Springer (2021), S. 1--31
  - BibTeX
  - Link
  BibTeX
  @article{casalaro2021model, author = {Casalaro, Giuseppina Lucia and Cattivera, Giulio and Ciccozzi, Federico and Malavolta, Ivano and Wortmann, Andreas and Pelliccione, Patrizio}, doi = {10.1007/s10270-021-00908-8}, journal = {Software and Systems Modeling}, pages = {1--31}, publisher = {Springer}, title = {Model-driven engineering for mobile robotic systems: a systematic mapping study}, url = {https://link.springer.com/article/10.1007/s10270-021-00908-8}, year = 2021 }
  Link
  https://link.springer.com/article/10.1007/s10270-021-00908-8
4. Ellwein, Carsten ; Reichle, Alexander ; Herschel, Melanie ; Verl, Alexander: Integrative data processing for cyber-physical off-site and on-site construction promoting co-design. In: Procedia CIRP, Procedia CIRP. Bd. 100 (2021), S. 451–456. — 31st CIRP Design Conference 2021 (CIRP Design 2021)
  - BibTeX
  - Link
  BibTeX
  @article{ELLWEIN2021451, abstract = {The term co-design describes a collaborative design process, usually across the boundaries of individual areas. A major aspect, and often an obstacle in the implementation of the co-design approach, is the establishment of a centralized data management system. In the past, the data management concept has been approached from different perspectives. Current approaches usually are oriented along the process chain and thus reflect a unidirectional flow of information. Neither the information feedback nor the reaction to adjustments in upstream model steps is supported, which makes continuous collaboration more difficult and at best reduces the co-design approach for continuous data usage. This paper addresses these weaknesses while outlining an integrative data processing concept enabling co-design between the domains of construction and industrial prefabrication. Geometrical information generated during architectural design and construction planning is reused for the production of components, manufacturing-related design adjustments are transferred back into the domain of construction. Changes throughout the entire process are centrally recorded. To ensure independence from the software tools used and to consider their great diversity, data exchange is largely based on standards, namely industry foundation classes and the standard for the exchange of product model data. In order to counteract the sequential processing according to a waterfall model and to support the co-design approach, the industrial prefabrication toolchain, consisting of computer-aided manufacturing software and downstream postprocessors, is largely automated, so that reprocessing of a workpiece for minor geometric adjustments no longer requires any interaction of the production planner.}, author = {Ellwein, Carsten and Reichle, Alexander and Herschel, Melanie and Verl, Alexander}, doi = {https://doi.org/10.1016/j.procir.2021.05.103}, issn = {2212-8271}, journal = {Procedia CIRP}, note = {31st CIRP Design Conference 2021 (CIRP Design 2021)}, pages = {451-456}, title = {Integrative data processing for cyber-physical off-site and on-site construction promoting co-design}, url = {https://www.sciencedirect.com/science/article/pii/S2212827121005746}, volume = 100, year = 2021 }
  Link
  https://www.sciencedirect.com/science/article/pii/S2212827121005746
5. Fischer, Marc ; Riedel, Oliver ; Lechler, Armin ; Verl, Alexander: Arithmetic Coding for Floating-Point Numbers. In: 2021 IEEE Conference on Dependable and Secure Computing (DSC), 2021 IEEE Conference on Dependable and Secure Computing (DSC), 2021, S. 01–08
  - BibTeX
  - Link
  BibTeX
  @inproceedings{9346236, author = {Fischer, Marc and Riedel, Oliver and Lechler, Armin and Verl, Alexander}, booktitle = {2021 IEEE Conference on Dependable and Secure Computing (DSC)}, doi = {10.1109/DSC49826.2021.9346236}, pages = {01-08}, title = {Arithmetic Coding for Floating-Point Numbers}, url = {https://ieeexplore.ieee.org/document/9346236}, year = 2021 }
  Link
  https://ieeexplore.ieee.org/document/9346236
6. Fur, Shan ; Riedel, Oliver ; Verl, Alexander: Hybrid Commissioning of Production Plants. In: 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA ), 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA ), 2021, S. 1–6
  - BibTeX
  BibTeX
  @inproceedings{9613256, abstract = {For the commissioning of production plants, the virtual commissioning (VCOM) method has proven to accelerate the overall commissioning time by increasing the software quality of the plant controller. VCOM is carried out in advance of the commissioning of the real plant, using a simulated plant. However, the hard transition from the simulated to the real plant proves to be problematic if components of the real plant are not available. In these cases the hybrid commissioning (HCOM) method, a hardware-in-the-loop (HIL) simulation setup including both real and simulated components, is desirable. In this article, the disadvantages of a hard transition of VCOM, the concept of the HCOM and it's benefits for commissioning production plants are explained and discussed. Also, an evaluation of an implementation is briefly presented.}, author = {Fur, Shan and Riedel, Oliver and Verl, Alexander}, booktitle = {2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA )}, doi = {10.1109/ETFA45728.2021.9613256}, month = {09}, pages = {1-6}, title = {Hybrid Commissioning of Production Plants}, year = 2021 }
7. Heiland, Stefan ; Klingel, Lars ; Penter, Lars ; Jaensch, Florian ; Schenke, Christer ; Ihlenfeldt, Steffen ; Verl, Alexander: Virtual Tool Commissioning using LS-DYNA Functional Mock-up Interface. In: , 2021
  - BibTeX
  - Link
  BibTeX
  @conference{heiland2021virtual, author = {Heiland, Stefan and Klingel, Lars and Penter, Lars and Jaensch, Florian and Schenke, Christer and Ihlenfeldt, Steffen and Verl, Alexander}, eventdate = {2021}, eventtitle = {13th European LS-DYNA Conference 2021, Ulm, Germany}, title = {Virtual Tool Commissioning using LS-DYNA Functional Mock-up Interface}, url = {https://www.dynalook.com/conferences/13th-european-ls-dyna-conference-2021/simulation-methods/heiland_tu_dresden.pdf}, year = 2021 }
  Link
  https://www.dynalook.com/conferences/13th-european-ls-dyna-conference-2021/simulation-methods/heiland_tu_dresden.pdf
8. Helfesrieder, Nico ; Lechler, Armin ; Verl, Alexander: Strukturoptimierte Maschinenkomponenten mit hoher Dämpfung. In: Antriebstechnik, Antriebstechnik. Bd. 3/2021 (2021), Nr. 3, S. 40--43
  - BibTeX
  - Link
  BibTeX
  @article{Helfesrieder.2021, author = {Helfesrieder, Nico and Lechler, Armin and Verl, Alexander}, issn = {0722-8546}, journal = {Antriebstechnik}, number = 3, pages = {40--43}, title = {Strukturoptimierte Maschinenkomponenten mit hoher Dämpfung}, url = {http://digital.antriebstechnik.de/antriebstechnik-3-2020/65318893/40}, volume = {3/2021}, year = 2021 }
  Link
  http://digital.antriebstechnik.de/antriebstechnik-3-2020/65318893/40
9. Helfesrieder, Nico ; Neubauer, Michael ; Lechler, Armin ; Verl, Alexander: Hybrid manufacturing of topology optimized machine tool parts through a layer laminated manufacturing method: Practical validation using the example of a bearing block. In: Production Engineering Research and Development, Production Engineering Research and Development. (2021)
  - BibTeX
  - Link
  BibTeX
  @article{Helfesrieder.2021b, abstract = {Load-oriented lightweight structures are commonly designed based on topology optimization. For machine tool parts, they enable the reduction of moving masses and therefore increase the resource and energy efficiency of production systems. However, this usually results in complex part structures that are difficult or impossible to produce using conventional manufacturing methods. In this paper, a hybrid layer laminated manufacturing (LLM) method is proposed enabling manufacturing of topology-optimized machine tool parts. The method is referred to as hybrid, as the subtractive structuring of metal sheets is combined with the additive joining of the sheets by adhesive bonding. This enables enclosed inner cavities without support structures, which are used to approximate the optimal density distribution from a topology optimization via manufacturing. The proposed LLM method is validated on the basis of a bearing block of a ball screw feed drive. A experimental study in the time and frequency domain on a test rig confirms the principle suitability of the LLM method for the production of industrial applicable lightweight components.}, author = {Helfesrieder, Nico and Neubauer, Michael and Lechler, Armin and Verl, Alexander}, doi = {10.1007/s11740-021-01095-7}, file = {Helfesrieder, Neubauer et al. 2021 - Hybrid manufacturing of topology optimized:Attachments/Helfesrieder, Neubauer et al. 2021 - Hybrid manufacturing of topology optimized.pdf:application/pdf}, issn = {0944-6524}, journal = { Production Engineering Research and Development}, month = {12}, title = {Hybrid manufacturing of topology optimized machine tool parts through a layer laminated manufacturing method: Practical validation using the example of a bearing block}, url = {https://doi.org/10.1007/s11740-021-01095-7}, year = 2021 }
  Link
  https://doi.org/10.1007/s11740-021-01095-7
10. Jaensch, Florian ; Steidle, Adrian ; Verl, Alexander: Curriculum Multi-Stage Reinforcement Learning for Automated Interlinked Production Systems on Virtual Commissioning Simulations. In: 2021 Third International Conference on Transdisciplinary AI (TransAI), 2021 Third International Conference on Transdisciplinary AI (TransAI), 2021, S. 129–136
  - BibTeX
  BibTeX
  @inproceedings{9565636, abstract = {In order to automate the software engineering process of interlinked production systems, reinforcement learning applications can be used to learn the control flow logic on the basis of virtual production systems. Since the simulation- based prototypes are available for virtual commissioning (VC) anyway, they can be used simultaneously as reinforcement learning environments. In this work, the event-discrete flow logic for the transport and assembly of a target workpiece is learned automatically by reinforcement learning on the real use case of the VC simulation of a PLC-based production system. According to the idea of curriculum learning, the system is trained separately in subsystems to support its modularity and to reduce the complexity of the overall learning process. With regard to the learning processes, subsystems, sequence errors, termination criteria and necessary action and state adjustments typical for the PLC-based plant are identified and implemented in the VC simulation. The reward functions are derived with respect to the individual subsystems. The learned controls of the subsystems are then merged back together for a complete flow of the entire system.}, author = {Jaensch, Florian and Steidle, Adrian and Verl, Alexander}, booktitle = {2021 Third International Conference on Transdisciplinary AI (TransAI)}, doi = {10.1109/TransAI51903.2021.00031}, month = {09}, pages = {129-136}, title = {Curriculum Multi-Stage Reinforcement Learning for Automated Interlinked Production Systems on Virtual Commissioning Simulations}, year = 2021 }
11. Kaiser, Benjamin ; Littfinski, Daniel ; Verl, Alexander: Automatic Generation of Digital Twin Models for Simulation of Reconfigurable Robotic Fabrication Systems for Timber Prefabrication. In: Feng, C. ; Linner, T. ; Brilakis, I. ; Castro, D. ; Chen, P.-H. ; Cho, Y. ; Du, J. ; Ergan, S. ; u. a. (Hrsg.) ; Feng, C. ; Linner, T. ; Brilakis, I. ; Castro, D. ; Chen, P.-H. ; Cho, Y. ; Du, J. ; Ergan, S. ; u. a. (Hrsg.): Proceedings of the 38th International Symposium on Automation and Robotics in Construction (ISARC), Proceedings of the 38th International Symposium on Automation and Robotics in Construction (ISARC). Dubai, UAE : International Association for Automation and Robotics in Construction (IAARC), 2021 — ISBN 978-952-69524-1-3, S. 717–724
  - BibTeX
  BibTeX
  @inproceedings{10.22260/ISARC2021/0097, address = {Dubai, UAE}, author = {Kaiser, Benjamin and Littfinski, Daniel and Verl, Alexander}, booktitle = {Proceedings of the 38th International Symposium on Automation and Robotics in Construction (ISARC)}, doi = {10.22260/ISARC2021/0097}, editor = {Feng, Chen and Linner, Thomas and Brilakis, Ioannis and Castro, Daniel and Chen, Po-Han and Cho, Yong and Du, Jing and Ergan, Semiha and Garcia de Soto, Borja and Gašparík, Jozef and Habbal, Firas and Hammad, Amin and Iturralde, Kepa and Bock, Thomas and Kwon, Soonwook and Lafhaj, Zoubeir and Li, Nan and Liang, Ci-Jyun and Mantha, Bharadwaj and Ng, Ming Shan and Hall, Daniel and Pan, Mi and Pan, Wei and Rahimian, Farzad and Raphael, Benny and Sattineni, Anoop and Schlette, Christian and Shabtai, Isaac and Shen, Xuesong and Tang, Pingbo and Teizer, Jochen and Turkan, Yelda and Valero, Enrique and Zhu, Zhenhua}, isbn = {978-952-69524-1-3}, issn = {2413-5844}, month = {11}, pages = {717-724}, publisher = {International Association for Automation and Robotics in Construction (IAARC)}, title = {Automatic Generation of Digital Twin Models for Simulation of Reconfigurable Robotic Fabrication Systems for Timber Prefabrication}, year = 2021 }
12. Kaiser, Benjamin ; Strobel, Tim ; Verl, Alexander: Human-Robot Collaborative Workflows for Reconfigurable Fabrication Systems in Timber Prefabrication using Augmented Reality. In: M2VIP, M2VIP : IEEE, 2021 — ISBN 978-1-6654-3153-8, S. 576–581
  - BibTeX
  - Link
  BibTeX
  @inproceedings{conf/m2vip/KaiserSV21, author = {Kaiser, Benjamin and Strobel, Tim and Verl, Alexander}, booktitle = {M2VIP}, crossref = {conf/m2vip/2021}, ee = {https://doi.org/10.1109/M2VIP49856.2021.9665011}, isbn = {978-1-6654-3153-8}, pages = {576-581}, publisher = {IEEE}, title = {Human-Robot Collaborative Workflows for Reconfigurable Fabrication Systems in Timber Prefabrication using Augmented Reality.}, url = {http://dblp.uni-trier.de/db/conf/m2vip/m2vip2021.html#KaiserSV21}, year = 2021 }
  Link
  http://dblp.uni-trier.de/db/conf/m2vip/m2vip2021.html#KaiserSV21

Alexander W. Verl wurde am 13.07.1966 in Frunse, UdSSR, geboren. Seine Eltern zogen 1976 nach Deutschland zurück. Er hat von 1986 bis 1991 an der Friedrich-Alexander-Universität Erlangen-Nürnberg Elektrotechnik studiert und als Dipl.-Ing. abgeschlossen. 1997 promovierte er zum Dr.-Ing. im Bereich Regelungstechnik am Institut für Robotik und Mechatronik (DLR), Oberpfaffenhofen und wurde 2005 zum ordentlichen Professor (Univ.-Prof. W3) an der Universität Stuttgart ernannt.

Derzeit ist er ordentlicher Professor und Leiter des Instituts für Steuerungstechnik der Werkzeugmaschinen und Fertigungseinrichtungen (ISW) an der Universität Stuttgart; 1992-1994 arbeitete er als Entwicklungsingenieur bei der Siemens AG am Forschungszentrum Erlangen. 1997 - 2005 war er Gründer und Geschäftsführer der AMATEC Robotics GmbH (ab 2005 Teil der KUKA Roboter GmbH); von 2006 – 2014 war er im Nebenamt Institutsleiter am Fraunhofer Institut für Produktionstechnik und Automatisierung (IPA). Von 2014 – 2016 war er während seiner Tätigkeit als Vorstand für Technologiemarketing und Geschäftsmodelle bei der Fraunhofer Gesellschaft von der Universität beurlaubt. Seit 2018 ist er Dekan der Maschinenbaufakultät (Fakultät 7) an der Universität Stuttgart.

Univ.-Prof. Dr.-Ing. A. Verl erhielt 2014 die Diesel-Goldmedaille des Deutschen Instituts für Erfindungen (D.I.E.), 2012 den Julius von Haast Fellowship Award der Royal Society of New Zealand, 2012 die Ehrendoktorwürde (Dr. h.c.) der Technischen Universität Cluj-Napoca, Rumänien und die Ehrenprofessur (Prof. h.c.) der University of Auckland, Department of Mechanical Engineering, Neuseeland, im Jahr 2010 den Invention & Entrepreneurship Award (IERA Award) der IEEE Robotics and Automation Society (IEEE RAS) und der International Federation of Robotics (IFR) und die Ehrendoktorwürde (Dr. h.c.) der "Politehnica" Universität Timisoara, Rumänien im Jahr 2009.

Seine fachlichen Schwerpunkte liegen in den Bereichen industrielle Steuerungstechnik, Mechatronik, Robotik und Produktions-IT.

Alexander Verl

Kontakt

Publikationen

2024

BibTeX

Link

BibTeX

Link

BibTeX

Link

BibTeX

Link

BibTeX

BibTeX

BibTeX

Link

BibTeX

2023

BibTeX

Link

BibTeX

BibTeX

Link

BibTeX

Link

BibTeX

BibTeX

Link

BibTeX

Link

BibTeX

BibTeX

Link

BibTeX

Link

BibTeX

Link

BibTeX

Link

BibTeX

BibTeX

BibTeX

BibTeX

Link

BibTeX

Link

BibTeX

Link

BibTeX

BibTeX

Link

BibTeX

Link

BibTeX

Link

BibTeX

Link

BibTeX

BibTeX

Link

BibTeX

Link

BibTeX

Link

BibTeX

Link

BibTeX

Link

BibTeX

Link

BibTeX

BibTeX

Link

BibTeX

Link

BibTeX

Link

BibTeX

Link

BibTeX