Position innerhalb des Seitenbaumes

Institut für Steuerungstechnik der Werkzeugmaschinen und Fertigungseinrichtungen
Institut
Team
Reichenbach, Thomas

Thomas Reichenbach

Herr M.Sc.

Wissenschaftlicher Mitarbeiter "Mechatronische Systeme und Prozesse"
Institut für Steuerungstechnik der Werkzeugmaschinen und Fertigungseinrichtungen

Kontakt

+49 711 685 84524
+49 711 685 74524
E-Mail
Visitenkarte (VCF)

Seidenstr. 36
70174 Stuttgart
Deutschland
Raum: 5.025

Sprechstunde

Nach Vereinbarung

Fachgebiet

Antriebstechnik bewegter Seile
Steuerung paralleler Seilroboter
Parallele Seilroboter mit endloser Rotationsachse
Modellierung mechatronischer Systeme

Publikationen

Meine Veröffentlichungen:

2023
1. Reichenbach, Thomas ; Trautwein, Felix ; Andreas, Pott ; Alexander, Verl: Development of a Cable Actuator Test Rig for Identification of Dynamic Running Properties of Synthetic Fiber Ropes. In: Volume 2023, Volume 2023., Wissenschaftliche Gesellschaft für Technische Logistik (2023), S. Issue 1
  - BibTeX
  - Link
  BibTeX
  @article{https://doi.org/10.2195/lj_proc_reichenbach_en_202310_01, author = {Reichenbach, Thomas and Trautwein, Felix and Andreas, Pott and Alexander, Verl}, copyright = {cc-by}, doi = {10.2195/LJ_PROC_REICHENBACH_EN_202310_01}, journal = {Volume 2023}, language = {en}, pages = {Issue 1}, publisher = {Wissenschaftliche Gesellschaft für Technische Logistik}, title = {Development of a Cable Actuator Test Rig for Identification of Dynamic Running Properties of Synthetic Fiber Ropes}, url = {https://www.logistics-journal.de/proceedings/2023/5804}, year = 2023 }
  Link
  https://www.logistics-journal.de/proceedings/2023/5804
2. Reichenbach, Thomas ; Verl, Alexander: Seilwindenprüfstand zur Untersuchung hochdynamischer Schlupf- und Reibeigenschaften von Kunststofffaserseilen. In: GmbH, V. F. (Hrsg.) antriebstechnik, antriebstechnik. Bd. 2023 (2023), Nr. 09, S. 40–42
  - BibTeX
  - Link
  BibTeX
  @article{reichenbach2023seilwindenprfstand, author = {Reichenbach, Thomas and Verl, Alexander}, editor = {GmbH, Vereinigte Fachverlage}, journal = {antriebstechnik}, month = {09}, number = 09, pages = {40-42}, title = {Seilwindenprüfstand zur Untersuchung hochdynamischer Schlupf- und Reibeigenschaften von Kunststofffaserseilen}, url = {https://digital.antriebstechnik.de/antriebstechnik-9-2023/68394687/40}, volume = 2023, year = 2023 }
  Link
  https://digital.antriebstechnik.de/antriebstechnik-9-2023/68394687/40
3. Trautwein, Felix ; Reichenbach, Thomas ; Pott, Andreas ; Verl, Alexander: A Predictor-Corrector-Scheme for the Geometry Planning for In-Operation-Reconfiguration of Cable-Driven Parallel Robots. In: Caro, S. ; Pott, A. ; Bruckmann, T. (Hrsg.) ; Caro, S. ; Pott, A. ; Bruckmann, T. (Hrsg.): Cable-Driven Parallel Robots, Cable-Driven Parallel Robots. Bd. 132. Cham : Springer Nature Switzerland, 2023 — ISBN 9783031323218, S. 261--272
  - BibTeX
  - Link
  BibTeX
  @inbook{trautwein2023predictorcorrectorscheme, address = {Cham}, author = {Trautwein, Felix and Reichenbach, Thomas and Pott, Andreas and Verl, Alexander}, booktitle = {Cable-Driven Parallel Robots}, doi = {10.1007/978-3-031-32322-5_21}, editor = {Caro, Stéphane and Pott, Andreas and Bruckmann, Tobias}, isbn = {9783031323218}, pages = {261--272}, publisher = {Springer Nature Switzerland}, title = {A Predictor-Corrector-Scheme for the Geometry Planning for In-Operation-Reconfiguration of Cable-Driven Parallel Robots}, url = {https://link.springer.com/chapter/10.1007/978-3-031-32322-5_21}, volume = 132, year = 2023 }
  Link
  https://link.springer.com/chapter/10.1007/978-3-031-32322-5_21
2022
1. Reichenbach, Thomas ; Trautwein, Felix ; Pott, Andreas ; Verl, Alexander: Parallele Seilroboter: Endlose Rotation durch Hybridstruktur. In: Bertram, T. ; Corves, B. ; Janschek, K. ; Rinderknecht, S. (Hrsg.) Fachtagung VDI MECHATRONIK 2022, Fachtagung VDI MECHATRONIK 2022. (2022)
  - BibTeX
  - Link
  BibTeX
  @article{https://doi.org/10.26083/tuprints-00020963, author = {Reichenbach, Thomas and Trautwein, Felix and Pott, Andreas and Verl, Alexander}, copyright = {Creative Commons Attribution 4.0 International}, doi = {10.26083/TUPRINTS-00020963}, editor = {Bertram, Torsten and Corves, Burkhard and Janschek, Klaus and Rinderknecht, Stephan}, journal = {Fachtagung VDI MECHATRONIK 2022}, title = {Parallele Seilroboter: Endlose Rotation durch Hybridstruktur}, url = {https://tuprints.ulb.tu-darmstadt.de/id/eprint/20963}, year = 2022 }
  Link
  https://tuprints.ulb.tu-darmstadt.de/id/eprint/20963
2021
1. Trautwein, Felix ; Reichenbach, Thomas ; Pott, Andreas ; Verl, Alexander: Workspace Planning for In-Operation-Reconfiguration of Cable-Driven Parallel Robots. In: Gouttefarde, M. ; Bruckmann, T. ; Pott, A. (Hrsg.) ; Gouttefarde, M. ; Bruckmann, T. ; Pott, A. (Hrsg.): Cable-Driven Parallel Robots, Cable-Driven Parallel Robots. Cham : Springer International Publishing, 2021 — ISBN 978-3-030-75789-2, S. 182--193
  - BibTeX
  - Link
  BibTeX
  @inproceedings{10.1007/978-3-030-75789-2_15, abstract = {This paper presents a planning method to systematically determine a geometry for a cable-driven parallel robot (short: cable robot) that satisfies a given workspace requirement. Furthermore, the method should be suitable for a fast workspace planning during In-Operation-Reconfiguration which implies that the algorithm should be executable fast, i.e. the aim is a computation time below one second. To do so, firstly the theoretical backgrounds for kinematics and workspace analysis of cable robots are introduced. Based on that, the parameter restrictions are modelled in terms of continuous closed sets, which are later used as bounds during the planning process. Afterwards, the theoretical problem of reconfiguration is presented and the solution strategy is proposed. In order to evaluate the given method, in the last section an exemplary reconfiguration situation is investigated, which shows that the method is suitable for the purpose to determine a cable robot for a given workspace requirement.}, address = {Cham}, author = {Trautwein, Felix and Reichenbach, Thomas and Pott, Andreas and Verl, Alexander}, booktitle = {Cable-Driven Parallel Robots}, doi = {10.1007/978-3-030-75789-2_15}, editor = {Gouttefarde, Marc and Bruckmann, Tobias and Pott, Andreas}, isbn = {978-3-030-75789-2}, pages = {182--193}, publisher = {Springer International Publishing}, title = {Workspace Planning for In-Operation-Reconfiguration of Cable-Driven Parallel Robots}, url = {https://doi.org/10.1007/978-3-030-75789-2_15}, year = 2021 }
  Link
  https://doi.org/10.1007/978-3-030-75789-2_15
2. Reichenbach, Thomas ; Verl, Alexander: Seilroboter im prüfenden Blick, Hochdynamikuntersuchung von Seilwinden mit Kunststofffaserseilen. In: Matthiesen, S. ; Wartzack, S. ; Zimmer, D. (Hrsg.) Konstruktion, Konstruktion. (2021), Nr. 4, S. 40
  - BibTeX
  BibTeX
  @article{reichenbach2021seilroboter, author = {Reichenbach, Thomas and Verl, Alexander}, editor = {Matthiesen, Sven and Wartzack, Sandro and Zimmer, Detmar}, institution = {VDI fachmedien}, journal = {Konstruktion}, month = {04}, number = 4, pages = 40, title = {Seilroboter im prüfenden Blick, Hochdynamikuntersuchung von Seilwinden mit Kunststofffaserseilen}, year = 2021 }
3. Reichenbach, Thomas ; Rausch, Kathrin ; Trautwein, Felix ; Pott, Andreas ; Verl, Alexander: Velocity Based Hybrid Position-Force Control of Cable Robots and Experimental Workspace Analysis. In: Gouttefarde, M. ; Bruckmann, T. ; Pott, A. (Hrsg.) ; Gouttefarde, M. ; Bruckmann, T. ; Pott, A. (Hrsg.): Cable-Driven Parallel Robots, Cable-Driven Parallel Robots. Cham : Springer International Publishing, 2021 — ISBN 978-3-030-75789-2, S. 230--242
  - BibTeX
  - Link
  BibTeX
  @inproceedings{10.1007/978-3-030-75789-2_19, abstract = {One important design criteria of a cable-driven parallel robot is its workspace. Disturbance effects on drive systems, pulley mechanisms and cables have a major impact on the workspace due to their influence on cable forces. Thus, the computed wrench-feasible workspace with ideal kinematic constraints may not be valid while operating the platform of a cable robot. To ensure that the platform moves within the workspace, cable forces can be controlled, whereby kinematic inaccuracies such as calibration errors affecting the platform's positional accuracy. Hence, in this paper a concept of the velocity based hybrid position-force controller is presented in order to pretension cable forces on one hand, and ensure positioning accuracy on the other hand. The controller stability is investigated on extreme poses outside the wrench-feasible workspace hull of a dynamic model of a planar cable robot in simulation environment. Thereupon, the hybrid controller was implemented in a real-time control system and analyzed on the cable robot setup COPacabana with experiments inside and outside the computed workspace border. The analysis of measured signals is based on statistical investigation by performing multiple measurements of the same platform trajectory. Both, simulation and experiments show that the proposed velocity based hybrid position-force controller is feasible and can be applied to move the platform outside the workspace.}, address = {Cham}, author = {Reichenbach, Thomas and Rausch, Kathrin and Trautwein, Felix and Pott, Andreas and Verl, Alexander}, booktitle = {Cable-Driven Parallel Robots}, doi = {10.1007/978-3-030-75789-2_19}, editor = {Gouttefarde, Marc and Bruckmann, Tobias and Pott, Andreas}, isbn = {978-3-030-75789-2}, pages = {230--242}, publisher = {Springer International Publishing}, title = {Velocity Based Hybrid Position-Force Control of Cable Robots and Experimental Workspace Analysis}, url = {https://doi.org/10.1007/978-3-030-75789-2_19}, year = 2021 }
  Link
  https://doi.org/10.1007/978-3-030-75789-2_19
2020
1. Trautwein, Felix ; Reichenbach, Thomas ; Verl, Alexander ; Eberhard, P. (Hrsg.) ; Eberhard, P. (Hrsg.): Seilroboter als rekonfigurierbare Handhabungssysteme, handling ( Nr. 7–8), 2020
  - BibTeX
  BibTeX
  @techreport{trautwein2020seilroboter, author = {Trautwein, Felix and Reichenbach, Thomas and Verl, Alexander}, editor = {Eberhard, Peter}, journal = {handling}, month = {08}, number = {7-8}, pages = {28-29}, title = {Seilroboter als rekonfigurierbare Handhabungssysteme}, year = 2020 }
2. Trautwein, Felix ; Reichenbach, Thomas ; Tempel, Philipp ; Pott, Andreas ; Verl, Alexander: COPacabana: A Modular Cable-Driven Parallel Robot. In: Sechste IFToMM D-A-CH Konferenz, Sechste IFToMM D-A-CH Konferenz. Bd. 2020, 2020
  - BibTeX
  BibTeX
  @incollection{Trautwein.2020, abstract = {Due to their use of modular components, cable-driven parallel robots are prime candidates for use as reconfigurable robotic manipulators. Reconfiguration comprises both the change of the geometry as well as topological changes such as adding or removing axes. To validate practicability of methods for reconfiguration, we developed the reconfigurable cable-driven parallel robot Cable-Operated Parallel Robot (COPacabana). This paper presents the mechanical design as well as the hardware and software in use on the test rig. Further use cases for validation of research findings are presented as well.}, author = {Trautwein, Felix and Reichenbach, Thomas and Tempel, Philipp and Pott, Andreas and Verl, Alexander}, booktitle = {Sechste IFToMM D-A-CH Konferenz}, doi = {10.17185/duepublico/71189}, file = {1ccdb281-835c-4959-be53-eb5ef6b33537:C\:\\Users\\ac123748\\AppData\\Local\\Swiss Academic Software\\Citavi 6\\ProjectCache\\cusz0rmxhlz77jjnyb5zp4hwqdh14zphlkpe42130wtgp54k\\Citavi Attachments\\1ccdb281-835c-4959-be53-eb5ef6b33537.pdf:pdf}, title = {COPacabana: A Modular Cable-Driven Parallel Robot}, volume = 2020, year = 2020 }
2019
1. Reichenbach, Thomas ; Tempel, Philipp ; Verl, Alexander ; Pott, Andreas: On Kinetostatics and Workspace Analysis of Multi-Platform Cable-Driven Parallel Robots with Unlimited Rotation. In: Kuo, C.-H. u. a. (Hrsg.) ; Kuo, C.-H. u. a. (Hrsg.): Proceedings of the 6th IFToMM International Symposium on Robotics and Mechatronics, Proceedings of the 6th IFToMM International Symposium on Robotics and Mechatronics : Springer Switzerland, 2019
  - BibTeX
  - Link
  BibTeX
  @inproceedings{Reichenbach.2019b, author = {Reichenbach, Thomas and Tempel, Philipp and Verl, Alexander and Pott, Andreas}, booktitle = {Proceedings of the 6th IFToMM International Symposium on Robotics and Mechatronics}, doi = {https://doi.org/10.1007/978-3-030-30036-4}, editor = {Kuo, Chin-Hsing et al.}, publisher = {Springer Switzerland}, title = {On Kinetostatics and Workspace Analysis of Multi-Platform Cable-Driven Parallel Robots with Unlimited Rotation}, url = {https://doi.org/10.1007/978-3-030-30036-4}, year = 2019 }
  Link
  https://doi.org/10.1007/978-3-030-30036-4
2. Reichenbach, Thomas ; Verl, Alexander ; Eberhard, P. (Hrsg.) ; Eberhard, P. (Hrsg.): Umdrehungen ohne Ende. Seilroboter mit endloser Rotationsachse, handling ( Nr. 6), 2019
  - BibTeX
  BibTeX
  @techreport{reichenbach2019umdrehungen, author = {Reichenbach, Thomas and Verl, Alexander}, editor = {Eberhard, Peter}, journal = {handling}, month = {06}, number = 6, pages = 24, title = {Umdrehungen ohne Ende. Seilroboter mit endloser Rotationsachse}, year = 2019 }
3. Reichenbach, Thomas ; Tempel, Philipp ; Verl, Alexander ; Pott, Andreas: Static Analysis of a Two-Platform Planar Cable-Driven Parallel Robot with Unlimited Rotation. In: Pott, A. ; Bruckmann, T. (Hrsg.) ; Pott, A. ; Bruckmann, T. (Hrsg.): Proceedings of the Fourth International Conference on Cable-Driven Parallel Robots, Proceedings of the Fourth International Conference on Cable-Driven Parallel Robots : Springer Switzerland, 2019
  - BibTeX
  - Link
  BibTeX
  @inproceedings{reichenbach2019static, author = {Reichenbach, Thomas and Tempel, Philipp and Verl, Alexander and Pott, Andreas}, booktitle = {Proceedings of the Fourth International Conference on Cable-Driven Parallel Robots}, doi = {https://doi.org/10.1007/978-3-030-20751-9_11}, editor = {Pott, Andreas and Bruckmann, Tobias}, publisher = {Springer Switzerland}, series = {Advances in Mechanism and Machine Science}, title = {Static Analysis of a Two-Platform Planar Cable-Driven Parallel Robot with Unlimited Rotation}, url = {https://doi.org/10.1007/978-3-030-20751-9_11}, year = 2019 }
  Link
  https://doi.org/10.1007/978-3-030-20751-9_11
2017
1. Claus, Daniel ; Mlikota, Marijo ; Geibel, Jonathan ; Reichenbach, Thomas ; Pedrini, Giancarlo ; Mischinger, Johannes ; Schmauder, Siegfried ; Osten, Wolfgang: Large-field-of-view optical elastography using digital image correlation for biological soft tissue investigation. In: Journal of Medical Imaging, Journal of Medical Imaging. Bd. 4, SPIE-Intl Soc Optical Eng (2017), Nr. 1, S. 014505
  - BibTeX
  - Link
  BibTeX
  @article{Claus_2017, author = {Claus, Daniel and Mlikota, Marijo and Geibel, Jonathan and Reichenbach, Thomas and Pedrini, Giancarlo and Mischinger, Johannes and Schmauder, Siegfried and Osten, Wolfgang}, doi = {10.1117/1.jmi.4.1.014505}, journal = {Journal of Medical Imaging}, month = {03}, number = 1, pages = 014505, publisher = {{SPIE}-Intl Soc Optical Eng}, title = {Large-field-of-view optical elastography using digital image correlation for biological soft tissue investigation}, url = {https://doi.org/10.1117%2F1.jmi.4.1.014505}, volume = 4, year = 2017 }
  Link
  https://doi.org/10.1117%2F1.jmi.4.1.014505

Thomas Reichenbach

Kontakt

Sprechstunde

Fachgebiet

Publikationen

2023

BibTeX

Link

BibTeX

Link

BibTeX

Link

2022

BibTeX

Link

2021

BibTeX

Link

BibTeX

BibTeX

Link

2020

BibTeX

BibTeX

2019

BibTeX

Link

BibTeX

BibTeX

Link

2017

BibTeX

Link

Zielgruppe

Formalia

Services

Organisation

Thomas Reichenbach

Kontakt

Sprechstunde

Fachgebiet

Publikationen

2023

BibTeX

Link

BibTeX

Link

BibTeX

Link

2022

BibTeX

Link

2021

BibTeX

Link

BibTeX

BibTeX

Link

2020

BibTeX

BibTeX

2019

BibTeX

Link

BibTeX

BibTeX

Link

2017

BibTeX

Link

So erreichen Sie das ISW

Zielgruppe

Formalia

Services

Organisation