Veröffentlichungen

Stöbern Sie durch unsere aktuellsten Veröffentlichungen der letzten Jahre

Eine weitere Liste aller unserer Veröffentlichungen inklusive Such- und Exportfunktion finden Sie in unserer Online-Datenbank.

2024

  1. Ajdinovic, S., Strljic, M., Lechler, A., & Riedel, O. (2024). Interoperable Digital Product Passports: An Event-Based Approach to Aggregate Production Data to Improve Sustainability and Transparency in the Manufacturing Industry. 2024 IEEE/SICE International Symposium on System Integration (SII), 729–734. https://doi.org/10.1109/SII58957.2024.10417487
  2. Dietrich, D., Neubauer, M., Lechler, A., & Verl, A. (2024). Iterative Planning as a Holistic Framework for Production System-Wide Optimization Control Loops. In F. J. G. Silva, A. B. Pereira, & R. D. S. G. Camphilho (Hrsg.), Flexible Automation and Intelligent Manufacturing: Establishing Bridges for More Sustainable Manufacturing Systems (S. 611--621). Springer Nature Switzerland. https://doi.org/10.1007/978-3-031-38241-3_69
  3. Dietrich, D., Zürn, M., Reiff, C., Neubauer, M., Lechler, A., & Verl, A. (2024). Software-Defined Value Networks: Motivation, Approaches, and Research Activities. In T. Bauernhansl, A. Verl, M. Liewald, & H.-C. Möhring (Hrsg.), Production at the Leading Edge of Technology (S. 514–524). Springer Nature Switzerland. https://doi.org/10.1007/978-3-031-47394-4_50
  4. Göttlich, S., Hoher, S., Verl, A., Weißen, J., & Kienzlen, A. (2024). Materialflusssimulation für die Virtuelle Inbetriebnahme in Steuerungsechtzeit. In A. Verl, S. Röck, & C. Scheifele (Hrsg.), Echtzeitsimulation in der Produktionsautomatisierung: Beiträge zu Virtueller Inbetriebnahme, Digitalem Engineering und Digitalen Zwillingen (S. 121--140). Springer Berlin Heidelberg. https://doi.org/10.1007/978-3-662-66217-5_7
  5. Jaensch, F., & Verl, A. (2024). Simulationsmodelle der Virtuellen Inbetriebnahme als Lernumgebung für Reinforcement Learning. In A. Verl, S. Röck, & C. Scheifele (Hrsg.), Echtzeitsimulation in der Produktionsautomatisierung: Beiträge zu Virtueller Inbetriebnahme, Digitalem Engineering und Digitalen Zwillingen (S. 213--227). Springer Berlin Heidelberg. https://doi.org/10.1007/978-3-662-66217-5_13
  6. Kienzlen, A., & Verl, A. (2024). A Signal-Based Approach to Switching Between Micro and Macro Material Flow Models for Production Systems. In T. Bauernhansl, A. Verl, M. Liewald, & H.-C. Möhring (Hrsg.), Production at the Leading Edge of Technology (S. 491--501). Springer Nature Switzerland.
  7. Kübler, K., Jaensch, F., Daniel, C., & Verl, A. (2024). Nutzen von Digitalen Zwillingen und Virtueller Inbetriebnahme für den Maschinen- und Anlagenbau. In A. Verl, S. Röck, & C. Scheifele (Hrsg.), Echtzeitsimulation in der Produktionsautomatisierung (S. 141--154). Springer Berlin Heidelberg. https://doi.org/10.1007/978-3-662-66217-5_8
  8. Splettstößer, A.-K. (2024). Der qualitätsbewusste Digitale Zwilling. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 119(3), Article 3. https://doi.org/doi:10.1515/zwf-2024-1024
  9. Walker, M., Fischer, M., Neubauer, M., Lechler, A., & Verl, A. (2024). Towards a Domain Specific Language for the Development of Distributed Real-Time Systems. In T. Bauernhansl, A. Verl, M. Liewald, & H.-C. Möhring (Hrsg.), Production at the Leading Edge of Technology (S. 268--279). Springer Nature Switzerland. https://link.springer.com/chapter/10.1007/978-3-031-47394-4_27

2023

  1. Blandini, L., Kovaleva, D., Haufe, C. N., Nething, C., Nigl, D., Nitzlader, M., Smirnova, M., Strahm, B., Bosch, M., Funaro, D., & Nistler, M. (2023). Leicht bauen mit Beton – ausgewählte Forschungsarbeiten des ILEK – Teil 2: Strukturleichtbau. Beton- und Stahlbetonbau, 118(5), Article 5. https://doi.org/10.1002/best.202300026
  2. Bux, T., Riedel, O., & Lechler, A. (2023). Blockchain Based Approach on Gathering Manufacturing Information Focused on Data Integrity. In Lecture Notes in Production Engineering (S. 473--483). Springer International Publishing. https://doi.org/10.1007/978-3-031-18318-8_48
  3. Combemale, B., Jézéquel, J.-M., Perez, Q., Vojtisek, D., Jansen, N., Michael, J., Rademacher, F., Rumpe, B., Wortmann, A., & Zhang, J. (2023). Model-Based DevOps: Foundations and Challenges. 2023 ACM/IEEE International Conference on Model Driven Engineering Languages and Systems Companion (MODELS-C), 429--433.
  4. Eger, F. (2023). Reduktion von Nacharbeit und Ausschuss bei der mehrstufigen Produktion von rotierenden Bauteilen durch Downstreamkompensation. In F. Verlag (Hrsg.), Beiträge zum Stuttgarter Maschinenbau; 21 (S. 167). Fraunhofer Verlag.
  5. Ellwein, C., Jainczyk, B. A., & Riedel, O. (2023). Cloud vs. peer-to-peer manufacturing: a comparative case study. Procedia CIRP, 119, 993--998. https://doi.org/10.1016/j.procir.2023.02.175
  6. Ellwein, C., Neumann, R., & Verl, A. (2023). Software-defined Manufacturing: Data Representation. Procedia CIRP, 118, 360--365. https://doi.org/10.1016/j.procir.2023.06.062
  7. Elser, A. (2023). Direkte Trajektoriengenerierung auf Flächen in Numerischen Steuerungen für die Fertigung von Freiformflächenverbünden. In F. Verlag (Hrsg.), Beiträge zum Stuttgarter Maschinenbau 20 (S. 203). Fraunhofer Verlag.
  8. Feichtinger, K., Meixner, K., Rinker, F., Koren, I., Eichelberger, H., Heinemann, T., Holtmann, J., Konersmann, M., Michael, J., Neumann, E.-M., Pfeiffer, J., Rabiser, R., Riebisch, M., & Schmid, K. (2023). Software in Cyberphysischen Produktionssystemen: Herausforderungen zur Umsetzung in der Industrie. atp magazin, 65(4), Article 4. https://doi.org/10.17560/atp.v65i4.2646
  9. Feichtinger, K., Meixner, K., Rinker, F., Koren, I., Eichelberger, H., Heinemann, T., Holtmann, J., Konersmann, M., Michael, J., Neumann, E.-M., Pfeiffer, J., Rabiser, R., Riebisch, M., & Schmid, K. (2023). Software in Cyberphysischen Produktionssystemen. atp magazin, 65(4), Article 4. https://doi.org/10.17560/atp.v65i4.2646
  10. Fischer, M., Klingel, L., Lechler, A., Verl, A., & Neubauer, M. (2023). Dynamic Safety Distance Determination for Human Robot Coexistence in Industrial Applications. Advances in Automotive Production Technology – Towards Software-Defined Manufacturing and Resilient Supply Chains, 35–45. https://doi.org/10.1007/978-3-031-27933-1_4
  11. Fischer, M., & Neubauer, M. (2023). Forschungsinstitut baut Fabrik der Zukunft - Safety aus der Cloud. SPS-Magazin, 02/23, Article 02/23.
  12. Fischer, M., Walker, M., Lechler, A., Riedel, O., & Verl, A. (2023). Fehlertolerante Sicherheitssteuerung aus der Cloud. In wt Werkstattstechnik online (Hrsg.), wt Werkstattstechnik (5; Bd. 113, Nummer 5, S. 189–194). https://doi.org/10.37544/1436-4980-2023-05-11
  13. Frick, F., Weiss, M., Lechler, A., & Verl, A. (2023). Software-Defined Control Cabinet - Reprogramming Instead of Replacing. In T. Bauernhansl, A. Verl, M. Liewald, & H.-C. Möhring (Hrsg.), Production at the Leading Edge of Technology (S. 438–447). Springer Nature Switzerland. https://doi.org/10.1007/978-3-031-47394-4_43
  14. Fuchß, D., Kühn, T., Wortmann, A., Pfeiffer, J., & Koziolek, A. (2023). An Expert Survey on the Use of Informal Models in the Automotive Industry. https://doi.org/10.5445/IR/1000162389
  15. Fur, S., Ajdinovic, S., Lechler, A., & Verl, A. (2023). Towards an Implementation of Simulation Based Digital Twins in Cyber-Physical Production Systems Environments. 2023 IEEE 28th International Conference on Emerging Technologies and Factory Automation (ETFA), 1–4. https://doi.org/10.1109/ETFA54631.2023.10275580
  16. Fur, S., Heithoff, M., Michael, J., Netz, L., Pfeiffer, J., Rumpe, B., & Wortmann, A. (2023). Sustainable Digital Twin Engineering for the Internet of Production. In Digital Twin Driven Intelligent Systems and Emerging Metaverse (S. 101--121). Springer.
  17. Garcia, N. H., Deshpande, H., Wu, R., Kahl, B., & Wortmann, A. (2023). Lifting ROS to Model-Driven Development: Lessons Learned from a bottom-up approach. 2023 IEEE/ACM 5th International Workshop on Robotics Software Engineering (RoSE), 31--36.
  18. Garcia, N. H., & Wortmann, A. (2023). Survey on Robotic Systems Integration. 2023 IEEE/ACM 5th International Workshop on Robotics Software Engineering (RoSE), 9--16.
  19. Greiner, S., Wiesmayr, B., Feichtinger, K., Meixner, K., Konersmann, M., Pfeiffer, J., Oberlehner, M., Schmalzing, D., Wortmann, A., Rumpe, B., & others. (2023). Maturity Evaluation of Domain-Specific Language Ecosystems for Cyber-Physical Production Systems. 2023 IEEE 28th International Conference on Emerging Technologies and Factory Automation (ETFA), 1--8.
  20. Greiner, S., Wiesmayr, B., Feichtinger, K., Meixner, K., Konersmann, M., Pfeiffer, J., Oberlehner, M., Schmalzing, D., Wortmann, A., Rumpe, B., Rabiser, R., & Zoitl, A. (2023). Maturity Evaluation of Domain-Specific Language Ecosystems for Cyber-Physical Production Systems. 2023 IEEE 28th International Conference on Emerging Technologies and Factory Automation (ETFA), 1–8. https://doi.org/10.1109/ETFA54631.2023.10275624
  21. Heinemann, T., Ajdinovic, S., Lechler, A., & Riedel, O. (2023). OPC UA Tests im Kontext einer Dateninfrastruktur. https://doi.org/10.37544/1436-4980-2023-05-29
  22. Heinemann, T., Lechler, A., & Riedel, O. (2023). Profiles and Testing in OPC UA—Current State and Future Potentials in Industry 4.0. In Lecture Notes in Production Engineering (S. 101--112). Springer International Publishing. https://doi.org/10.1007/978-3-031-18641-7_11
  23. Helfesrieder, N., Lechler, A., & Verl, A. (2023). Leichtbau durch schichtweise LLM-Fertigung – zur Anisotropie der Bauteileigenschaften. Konstruktion, 75(09), Article 09. https://doi.org/10.37544/0720-5953-2023-09-42
  24. Helfesrieder, N., Neubauer, M., Lechler, A., & Verl, A. (2023). Anisotropic Damping and Stiffness of laminated steel parts using adhesive bonding – an empirical influence study. Procedia CIRP, 120, 428–433. https://doi.org/10.1016/j.procir.2023.09.014
  25. Hinze, C. (2023). Dynamiksteigerung von Kugelgewindetrieben durch modellbasierte Lageregelung der nachgiebigen Mechanik (O. Riedel, A. Verl, & A. Wortmann, Hrsg.). Universität Stuttgart.
  26. Jacobs, T. T. (2023). Entwicklung kompakter Antriebsmodule mit gefederten, unbegrenzt drehbaren, gelenkten Standardrädern für den Einsatz in omnidirektionalen Roboterplattformen. In Stuttgarter Beiträge zur Produktionsforschung (149149, Fraunhofer-Institut für Produktionstechnik und Automatisierung IPA; Nummer 149149). https://doi.org/10.18419/opus-13258
  27. Jaensch, F., Herburger, K., Bobe, E., Csiszar, A., Kienzlen, A., & Verl, A. (2023). Complex Physics with Graph Networks for Industrial Material Flow Simulation. Procedia CIRP, 118, 50–55. https://doi.org/10.1016/j.procir.2023.06.010
  28. Jaensch, F., Klingel, L., Fur, S., & Verl, A. (2023). Virtuelle Methoden in der Produktionstechnik: Virtuelle Inbetriebnahme als Bindeglied zwischen digitaler und realer Fabrik. atp magazin, 65(6–7), Article 6–7. https://doi.org/10.17560/atp.v65i6-7.2658
  29. Jolak, R., Wortmann, A., Liebel, G., Umuhoza, E., & Chaudron, M. R. (2023). Design thinking and creativity of colocated versus globally distributed software developers. Journal of Software: Evolution and Process, 35(5), Article 5.
  30. Jud, O., Lechler, A., & Verl, A. (2023). Vorspannungsverluste kompensieren. konstruktionspraxis, 07, Article 07. https://www.konstruktionspraxis.vogel.de/vorspannungsverluste-kompensieren-prototyp-auf-dem-pruefstand-a-9f59277ce2066aace87a5962d35cc579/
  31. Kamm, V., Mesmer, P., Lechler, A., & Verl, A. (2023). Prozessmodellierung für das Rührreibschweißen/Process modeling of friction stir welding – Semi-analytical process model of robotic friction stir welding. wt Werkstattstechnik online, 113(05), Article 05. https://doi.org/10.37544/1436-4980-2023-05-5
  32. Kienzlen, A., & Verl, A. (2023). KI ebnet den Weg für autonome Katheternavigation. mt | medizintechnik, 143(6), Article 6.
  33. Kienzlen, A., Zuern, M., Kazemi, S., Xu, W., Cheng, L. K., Strommel, M., & Verl, A. (2023). Recurrent Neural Network for Modelling a Contractive Soft Actuator. ISR Europe 2023; 56th International Symposium on Robotics, 419–425.
  34. Kirchhof, J. C., Jansen, N., Rumpe, B., & Wortmann, A. (2023). Navigating the Low-Code Landscape: A Comparison of Development Platforms. 2023 ACM/IEEE International Conference on Model Driven Engineering Languages and Systems Companion (MODELS-C), 854--862.
  35. Klingel, L., Heine, A., Acher, S., Dausend, N., & Verl, A. (2023). Simulation-Based Predictive Real-Time Collision Avoidance for Automated Production Systems. 2023 IEEE 19th International Conference on Automation Science and Engineering (CASE), 1–6. https://doi.org/10.1109/CASE56687.2023.10260637
  36. Klingel, L., Kübler, K., & Verl, A. (2023). A Multicore Control System Architecture as an Operating Platform for Industrial Digital Twins. Procedia CIRP, 118, 294–299. https://doi.org/10.1016/j.procir.2023.06.051
  37. Kurth, D., Ristok, S., Rühle, S., Verl, A., & Giessen, H. (2023). Multi-axis two photon polymerization machine and software concept for the manufacturing of aspheric lenses on non-planar substrates. Procedia CIRP, 118, 682--687. https://doi.org/10.1016/j.procir.2023.06.117
  38. Kurth, D., & Verl, A. (2023). Kinematic multi-axis two-photon polymerization printer concept for the manufacturing of micro-optics. In N. Narendran & G. Rao (Hrsg.), 3D Printing for Lighting (Bd. 12670, S. 1267004). SPIE. https://doi.org/10.1117/12.2675889
  39. Leipe, V., Hinze, C., Lechler, A., & Verl, A. (2023). Model predictive control for compliant feed drives with offset-free tracking behavior. Production Engineering. https://doi.org/10.1007/s11740-023-01206-6
  40. Mesmer, P. (2023). Antriebsbasierte Schwingungsdämpfung von Industrierobotern mit gelenkseitiger Positionsmessung. In Beiträge zum Stuttgarter Maschinenbau (1717; Nummer 1717). Fraunhofer Verlag.
  41. Michael, J., Schwammberger, M., & Wortmann, A. (2023). Explaining Cyber-Physical System Behavior with Digital Twins. IEEE Software.
  42. Mottahedi, M. (2023). Analysis and application of laminated object manufacturing for fabrication of topologically optimal components. In Beiträge zumStuttgarter Maschinenbau (1616; Nummer 1616). FraunhoferVerlag.
  43. Neubauer, M., Reiff, C., & Steinle, L. (2023). Mit Manufacturing-X zum föderativen Datenökosystem - Datokratie: Von der Vision zum Umsetzungsvorschlag. SPS-Magazin, 6, Article 6. https://katalog.tedomedien.de/index.php?catalog=SPS-MAGAZIN-6-2023
  44. Neubauer, M., Reiff, C., Walker, M., Oechsle, S., Lechler, A., & Verl, A. (2023). Cloud-based evaluation platform for software-defined manufacturing - Stuttgarter Maschinenfabrik as a realization example of an Industry 4.0 production. at - Automatisierungstechnik, 71(5), Article 5. https://doi.org/doi:10.1515/auto-2022-0137
  45. Neubauer, M., Steinle, L., Reiff, C., Ajdinovic, S., Klingel, L., Lechler, A., & Verl, A. (2023). Architecture for Manufacturing-X: Bringing Asset Administration Shell, Eclipse Dataspace Connector and OPC UA together. Manufacturing Letters, 37, 1–6. https://doi.org/10.1016/j.mfglet.2023.05.002
  46. Neumann, R., von Arnim, C., Neubauer, M., Lechler, A., & Verl, A. (2023). Requirements and Challenges in the Configuration of a Real-Time Node for OPC UA Publish-Subscribe Communication. 2023 29th International Conference on Mechatronics and Machine Vision in Practice (M2VIP), 1–6. https://doi.org/10.1109/M2VIP58386.2023.10413399
  47. Oechsle, S., Frick, F., Lechler, A., & Verl, A. (2023). A modular configuration and management framework for distributed real-time applications based on converged networks using TSN. Procedia CIRP, 118, 38--43. https://doi.org/10.1016/j.procir.2023.06.008
  48. Oechsle, S., Walker, M., Fischer, M., Frick, F., Lechler, A., & Verl, A. (2023). Real-Time Capable Architecture for Software-Defined Manufacturing: Bd. Advances in Automotive Production Technology – Towards Software-Defined Manufacturing and Resilient Supply Chains (A. 2036, Hrsg.; S. 3–13). Springer. https://doi.org/10.1007/978-3-031-27933-1_1
  49. Pfeiffer, J. (2023). Systematic Component-Oriented Language Reuse. 2023 ACM/IEEE International Conference on Model Driven Engineering Languages and Systems Companion (MODELS-C), 166–171. https://doi.org/10.1109/MODELS-C59198.2023.00043
  50. Pfeiffer, J., Lehner, D., Wortmann, A., & Wimmer, M. (2023, März). Towards a Product Line Architecture for Digital Twins. 2023 IEEE 20th International Conference on Software Architecture Companion (ICSA-C). https://doi.org/10.1109/icsa-c57050.2023.00049
  51. Pfeiffer, J., Rumpe, B., Schmalzing, D., & Wortmann, A. (2023). Composition operators for modeling languages: A literature review. Journal of Computer Languages, 76, 101226. https://doi.org/10.1016/j.cola.2023.101226
  52. Pfeiffer, J., & Wortmann, A. (2023). A Low-Code Platform for Systematic Component-Oriented Language Composition. Proceedings of the 16th ACM SIGPLAN International Conference on Software Language Engineering, 208--213.
  53. Reichenbach, T., Trautwein, F., Andreas, P., & Alexander, V. (2023). Development of a Cable Actuator Test Rig for Identification of Dynamic Running Properties of Synthetic Fiber Ropes. Volume 2023, Issue 1. https://doi.org/10.2195/LJ_PROC_REICHENBACH_EN_202310_01
  54. Reichenbach, T., & Verl, A. (2023). Seilwindenprüfstand zur Untersuchung hochdynamischer Schlupf- und Reibeigenschaften von Kunststofffaserseilen. antriebstechnik, 2023(09), Article 09. https://digital.antriebstechnik.de/antriebstechnik-9-2023/68394687/40
  55. Schmidt, A. (2023). Verfahren zur In-Situ Erfassung von Kenngrößen der Fügeliniengeometrie für den Lichtbogenschweißprozess. In F. Verlag (Hrsg.), Beiträge zum Stuttgarter Maschinenbau 18 (S. 161). Universität Stuttgart.
  56. Schuerrle, B., Grimmeisen, P., Pfeiffer, J., Zimmermann, T., Morozov, A., & Wortmann, A. (2023). Educating Future Software Engineers for Industrial Robotics. ISR Europe 2023; 56th International Symposium on Robotics, 168–175.
  57. Sherkat, S., Garmaroodi, A. A., Wortmann, A., & Wortmann, T. (2023). Residential complex design as a Constraint Satisfaction Problem. Automation in Construction, 154, 104995. https://doi.org/10.1016/j.autcon.2023.104995
  58. Sherkat, S., Skoury, L., Wortmann, A., & Wortmann, T. (2023). Artificial Intelligence Automated Task Planning for Fabrication. In K. Dörfler, J. Knippers, A. Menges, S. Parascho, H. Pottmann, & T. Wortmann (Hrsg.), Advances in Architectural Geometry 2023 (S. 249--260). De Gruyter. https://doi.org/doi:10.1515/9783111162683-019
  59. Spaney, P., Becker, S., Ströbel, R., Fleischer, J., Zenhari, S., Möhring, H.-C., Splettstößer, A.-K., & Wortmann, A. (2023). A Model-Driven Digital Twin for Manufacturing Process Adaptation. 2023 ACM/IEEE International Conference on Model Driven Engineering Languages and Systems Companion (MODELS-C), 465–469. https://doi.org/10.1109/MODELS-C59198.2023.00081
  60. Spaney, P., Becker, S., Ströbel, R., Fleischer, J., Zenhari, S., Möhring, H.-C., Splettstößser, A.-K., & Wortmann, A. (2023). A Model-Driven Digital Twin for Manufacturing Process Adaptation. 2023 ACM/IEEE International Conference on Model Driven Engineering Languages and Systems Companion (MODELS-C), 465–469. https://doi.org/10.1109/MODELS-C59198.2023.00081
  61. Splettstößer, A.-K., Ellwein, C., & Wortmann, A. (2023). Self-adaptive digital twin reference architecture to improve process quality. Procedia CIRP, 119, 867--872.
  62. Splettstößer, A.-K., Ellwein, C., & Wortmann, A. (2023). Self-adaptive digital twin reference architecture to improve process quality. Procedia CIRP, 119, 867--872. https://doi.org/10.1016/j.procir.2023.03.131
  63. Steinle, L., Helfesrieder, N., Lechler, A., Verl, A., Montazeri, A., & Wang, J. (2023, Juni). Decentralized Motion Control for a Novel Planar Motor Intralogistics System. 2023 IEEE 32nd International Symposium on Industrial Electronics (ISIE). https://doi.org/10.1109/isie51358.2023.10227969
  64. Ströbel, R., Bott, A., Wortmann, A., & Fleischer, J. (2023). Monitoring of Tool and Component Wear for Self-Adaptive Digital Twins: A Multi-Stage Approach through Anomaly Detection and Wear Cycle Analysis. Machines, 11(11), Article 11.
  65. Trautwein, F., Reichenbach, T., Pott, A., & Verl, A. (2023). A Predictor-Corrector-Scheme for the Geometry Planning for In-Operation-Reconfiguration of Cable-Driven Parallel Robots. In S. Caro, A. Pott, & T. Bruckmann (Hrsg.), Cable-Driven Parallel Robots (Bd. 132, S. 261--272). Springer Nature Switzerland. https://doi.org/10.1007/978-3-031-32322-5_21
  66. Verl, A., & Hinze, C. (2023). Increasing the dynamic accuracy of ball screw drives with quasi-sliding-mode (qSMC) position control. CIRP Annals. https://doi.org/10.1016/j.cirp.2023.04.081
  67. Verl, A., & Neubauer, M. (2023). Software-defined Manufacturing. Stuttgarter Maschinenbau Magazin, 4, 28–31.
  68. von Arnim, C., Walker, M., Lechler, A., Riedel, O., & Verl, A. (2023). Isolating Shared Resources for Time-Triggered Networking of Containerized Applications. 2023 29th International Conference on Mechatronics and Machine Vision in Practice (M2VIP), 1–6. https://doi.org/10.1109/M2VIP58386.2023.10413388
  69. Walker, M., Fischer, M., Lechler, A., & Verl, A. (2023). Evaluation of Isolation and Communication Mechanisms for Real-Time Containers. 2023 IEEE 32nd International Symposium on Industrial Electronics (ISIE), 1–8. https://doi.org/10.1109/ISIE51358.2023.10228012
  70. Walker, M., Klingel, L., Oechsle, S., Neubauer, M., Lechler, A., & Verl, A. (2023). Safeguarded Continuous Deployment of Control Containers through Real-Time Simulation. 2023 IEEE 28th International Conference on Emerging Technologies and Factory Automation (ETFA), 1–8. https://doi.org/10.1109/ETFA54631.2023.10275659
  71. Walker, M., & Neubauer, M. (2023). Forschungsinstitut baut Fabrik der Zukunft - Echtzeitsteuerung aus der Cloud. SPS-Magazin, 01/23, Article 01/23.
  72. Walker, M., Tasci, T., Lechler, A., & Verl, A. (2023). Analysis of Real-Time Execution Models for Container-Based Control Applications: Bd. Advances in Automotive Production Technology – Towards Software-Defined Manufacturing and Resilient Supply Chains (S. 14–24). Springer. https://doi.org/10.1007/978-3-031-27933-1_2
  73. Walker, M., von Arnim, C., Neubauer, M., Lechler, A., Riedel, O., & Verl, A. (2023). Reflection-based Prototyping Framework for OPC UA Servers for Companion Specifications. 2023 IEEE International Conference on Industrial Technology (ICIT), 1–6. https://doi.org/10.1109/ICIT58465.2023.10143130
  74. Wete, E., Greenyer, J., Wortmann, A., Kudenko, D., & Nejdl, W. (2023). MDE and Learning for flexible Planning and optimized Execution of Multi-Robot Choreographies. 2023 IEEE 28th International Conference on Emerging Technologies and Factory Automation (ETFA), 1--4.
  75. Wnuk, M., Zürn, M., Paukner, M., Ulbrich, S., Lechler, A., & Verl, A. (2023). Case Study on Localization for Robotic Wire Harness Installation. In N. Kiefl, F. Wulle, C. Ackermann, & D. Holder (Hrsg.), Advances in Automotive Production Technology -- Towards Software-Defined Manufacturing and Resilient Supply Chains (S. 333--343). Springer International Publishing.
  76. Wolf, M., Maier, V., & Verl, A. (2023). Method for the Calculation of Local Bead Volume in Multi-Axis Additive Manufacturing. Procedia CIRP, 120, 1244–1249. https://doi.org/10.1016/j.procir.2023.09.156
  77. Wulle, F. (2023). Untersuchung der belastungsgerechten Bahnplanung für das mehrachsige Schmelzschichtverfahren für Bauteile mit Zugspannungen. In Beiträge zumStuttgarter Maschinenbau (1515, Fraunhofer Verlag; Nummer 1515). https://doi.org/10.18419/opus-13133
  78. Xu, H., Hinze, C., Lechler, A., & Verl, A. (2023). Robust µ parameterization with low tuning complexity of cascaded control for feed drives. Control Engineering Practice, 138, 105607. https://doi.org/10.1016/j.conengprac.2023.105607
  79. Zimmer, M., Bunz, E. K., Ehring, T., Kaiser, B., Kienzlen, A., Schlüter, H., & Zürn, M. (2023). In vivo Assessment of Shear Wave Propagation in Pennate Muscles using an Automatic Ultrasound Probe Alignment System. IEEE Open Journal of Engineering in Medicine and Biology. https://doi.org/10.1109/ojemb.2023.3338090
  80. Zürn, M., Kienzlen, A., Klingel, L., Lechler, A., Verl, A., Ren, S., & Xu, W. (2023). Deep Learning-Based Instance Segmentation for Feature Extraction of Branched Deformable Linear Objects for Robotic Manipulation. 2023 IEEE 19th International Conference on Automation Science and Engineering (CASE), 1–6. https://doi.org/10.1109/CASE56687.2023.10260646
  81. Zürn, M., Wnuk, M., Lechler, A., & Verl, A. (2023). Topology Matching of Branched Deformable Linear Objects. 2023 IEEE International Conference on Robotics and Automation (ICRA), 7097–7103. https://doi.org/10.1109/ICRA48891.2023.10161483

2022

  1. Atmosudiro, A. (2022). Klothoidenbasiertes Überschleifverfahren für numerische Steuerungen. In Beiträge zum Stuttgarter Maschinenbau (66; Nummer 66). Fraunhofer Verlag.
  2. Bubeck, W., Frick, F., & Verl, A. (2022). Hardware-Accelerated Data Processing of Capacitive Sensor Arrays for Industrial and Service Robotic Applications. ISR Europe, 54, 174–179. https://ieeexplore.ieee.org/document/9861814
  3. Casalaro, G. L., Cattivera, G., Ciccozzi, F., Malavolta, I., Wortmann, A., & Pelliccione, P. (2022). Model-driven engineering for mobile robotic systems: a systematic mapping study. Software and Systems Modeling, 21(1), Article 1.
  4. Dalibor, M., Heithoff, M., Michael, J., Netz, L., Pfeiffer, J., Rumpe, B., Varga, S., & Wortmann, A. (2022). Generating customized low-code development platforms for digital twins. Journal of Computer Languages, 70, 101117. https://doi.org/10.1016/j.cola.2022.101117
  5. Dietrich, D., Neubauer, M., Lechler, A., & Verl, A. (2022). Fehlerfreie Produktion durch flexibilisierte Prozesse/Error-free production through flexible manufacturing processes – Change of planning and error compensation in software-defined manufacturing. wt Werkstattstechnik online, 112(05), Article 05. https://doi.org/10.37544/1436-4980-2022-05-6
  6. Dripke, C. (2022). Verteilte Interpolation : Bewegungssynchronisierung in dezentral gesteuerten Mehrachssystemen. In Beiträge zum Stuttgarter Maschinenbau (44, Fraunhofer Verlag; Nummer 44). https://doi.org/10.18419/opus-12232
  7. Eckhardt, A. (2022). Überwachter bidirektionaler Datenaustausch in industriellen Echtzeit-Kommunikationsarchitekturen. In Beiträge zum Stuttgarter Maschinenbau (88, Fraunhofer Verlag; Nummer 88). https://doi.org/10.18419/opus-12392
  8. Ellwein, C., Hekeler, M., & Riedel, O. (2022). Ambiguity Tolerant Commissioning Ontology: From an upper ontology to a domain specific implementation. Procedia CIRP, 112, 91–96. https://doi.org/10.1016/j.procir.2022.09.042
  9. Ellwein, C., & Neubauer, M. (2022). Neue technologische Grundlage. Referenzarchitekturmodell zur Digitalisierung von Produktionsnetzwerken. SPS MAGAZIN, 01/22, Article 01/22.
  10. Elser, A., Lechler, A., & Verl, A. (2022). Implementation of Surface Interpolators for Compound Surfaces without C2-continuity. Procedia CIRP, 109, 19--24. https://doi.org/10.1016/j.procir.2022.05.208
  11. Elser, A., Teicht, S., & Lechler, A. (2022). Modellbasierte numerische Steuerung: Entwicklung und Implementierung einer Steuerungsarchitektur für das Schwerkraftgießen. In WT WERKSTATTSTECHNIK (5; Bd. 110, Nummer 5, S. 6). VDI Verlag. https://doi.org/10.37544/1436-4980-2020-05
  12. Esslinger, E., & Neubauer, M. (2022). Referenzarchitektur für Maschinen und Fertigungsprozesse - Durchgängiges Engineering. SPS-Magazin, 06/22, Article 06/22.
  13. Feichtinger, K., Meixner, K., Rinker, F., Koren, I., Eichelberger, H., Heinemann, T., Holtmann, J., Konersmann, M., Michael, J., Neumann, E.-M., Pfeiffer, J., Rabiser, R., Riebisch, M., & Schmid, K. (2022). Industry Voices on Software Engineering Challenges in Cyber-Physical Production Systems Engineering. 2022 IEEE 27th International Conference on Emerging Technologies and Factory Automation (ETFA), 1–8. https://doi.org/10.1109/ETFA52439.2022.9921568
  14. Fischer, M., Riedel, O., & Lechler, A. (2022). Comprehensive Analysis of Software-Based Fault Tolerance with Arithmetic Coding for Performant Encoding of Integer Calculations. In M. Trapp, F. Saglietti, M. Spisländer, & F. Bitsch (Hrsg.), Computer Safety, Reliability, and Security (S. 144--157). Springer International Publishing. https://doi.org/10.1007/978-3-031-14835-4_10
  15. Frick, F., & Neubauer, M. (2022). Grundlagen für eine softwaredefinierte Fertigung - Paradigmenwechsel in der Produktion. SPS-Magazin, 2022(2), Article 2.
  16. Frommknecht, A. (2022). 3D Texturanalyse von Computertomographiedaten für die automatisierte Qualitätskontrolle von faserverstärkten Kunststoffen. In Stuttgarter Beiträge zur Produktionsforschung (141141, Fraunhofer-Institut für Produktionstechnik und Automatisierung IPA; Nummer 141141). https://doi.org/10.18419/opus-12481
  17. Fur, S., Delonge, N., Riedel, O., & Verl, A. (2022). Hybrid Commissioning of Industrial Plants: A Merge-Tool for PROFINET. 2022 IEEE 27th International Conference on Emerging Technologies and Factory Automation (ETFA), 1–7. https://doi.org/10.1109/ETFA52439.2022.9921686
  18. Fur, S., Mages, A., Wortmann, A., & Riedel, O. (2022). Auf dem Weg zum digitalen Zwilling/Investigation and compensation of the discrepancy between simulation models and their twins – On the way to the digital twin. wt Werkstattstechnik online, 112(04), Article 04. https://doi.org/10.37544/1436-4980-2022-04-58
  19. Hacks, S., Katsikeas, S., Rencelj Ling, E., Xiong, W., Pfeiffer, J., & Wortmann, A. (2022). Towards a Systematic Method for Developing Meta Attack Language Instances. In A. Augusto, A. Gill, D. Bork, S. Nurcan, I. Reinhartz-Berger, & R. Schmidt (Hrsg.), Enterprise, Business-Process and Information Systems Modeling (S. 139--154). Springer International Publishing. https://doi.org/10.1007/978-3-031-07475-2_10
  20. Halt, L. (2022). Reglersynthese für aufgabenraumgesteuerte Industrieroboter. In Stuttgarter Beiträge zur Produktionsforschung (136136, Fraunhofer-Institut für Produktionstechnik und Automatisierung IPA; Nummer 136136). https://doi.org/10.18419/opus-12255
  21. Heinemann, T., Friedl, S., & Lechler, A. (2022). OPC-UA-Domänenmodelle heute und morgen. In WT Werkstattstechnik online (Ausgabe 5-2022; Nummer Ausgabe 5-2022, S. 320–325). VDI Fachmedien GmbH & Co. KG.
  22. Heinemann, T., Gihr, M., Riedel, O., & Lechler, A. (2022). Towards Data-driven Production: Analysis of Data Models Describing Machinery Jobs in OPC UA. Proceedings of the 19th International Conference on Informatics in Control, Automation and Robotics. https://doi.org/10.5220/0011142900003271
  23. Huptych, M. (2022). Online-Bahnplanung für mehrere Flugroboter in veränderlicher Umgebung mithilfe der Kurvenflussmethode. In Beiträge zum Stuttgarter Maschinenbau (22, Fraunhofer Verlag; Nummer 22). https://doi.org/10.18419/opus-12143
  24. Hönig, J., Schnierle, M., Wehnert, C., Littfinski, D., Scheifele, C., Pfeifer, D., Münster, C., Roth, A., Franz, J., Röck, S., & Ferl, A. (2022). Mixed-Reality-in-the-Loop Simulation zur Schulung technischer Fachkräfte im Maschinen- und Anlagenbau. In W. und K. L. Hochschule für Technik (Hrsg.), Wissenstransfer im Spannungsfeld von Autonomisierung und Fachkräftemangel. Hochschule für Technik, Wirtschaft und Kultur Leipzig. https://doi.org/10.33968/2022.24
  25. Jaensch, F., Klingel, L., & Verl, A. (2022). Virtual Commissioning Simulation as OpenAI Gym - A Reinforcement Learning Environment for Control Systems. 2022 5th International Conference on Artificial Intelligence for Industries (AI4I), 64–67. https://doi.org/10.1109/AI4I54798.2022.00023
  26. Jaensch, F., Kübler, K., Schwarz, E., & Verl, A. (2022). Test-Driven Reward Function for Reinforcement Learning: A Contribution towards Applicable Machine Learning Algorithms for Production Systems. Procedia CIRP, 112, 103–108. https://doi.org/10.1016/j.procir.2022.09.043
  27. Jarwitz, M., Traunecker, D., von Arnim, C., Müller, N., & Kramer, S. (2022). Towards a universal manufacturing node: Requirements for a versatile, laser-based machine tool for highly adaptable manufacturing. Procedia CIRP, 111, 816--821. https://doi.org/10.1016/j.procir.2022.08.090
  28. Jud, O., Helfesrieder, N., Lechler, A., & Verl, A. (2022). Vorspannungsnachstellung an Kugelgewindetrieben/Preload adjustment on ball screws – Methods for increasing service life due to automatic adjustment of preload force. wt Werkstattstechnik online, 112(05), Article 05. https://doi.org/10.37544/1436-4980-2022-05-12
  29. Jud, O., Lechler, A., & Verl, A. (2022). Vorspannung adaptiv nachstellen. konstruktionspraxis, 08, Article 08. https://www.konstruktionspraxis.vogel.de/epaperarchiv/konstruktionspraxis_2022008/html5/index.html?pn=33
  30. Kaiser, B., Reichle, A., & Verl, A. (2022). Model-based automatic generation of digital twin models for the simulation of reconfigurable manufacturing systems for timber construction. Procedia CIRP, 107, 387--392. https://doi.org/10.1016/j.procir.2022.04.063
  31. Kaiser, B., Wolf, M., & Verl, A. (2022). Modular Control Architecture for Reconfigurable Fabrication Systems for Prefabrication in Construction. ISR Europe 2022; 54th International Symposium on Robotics, 1–7.
  32. Kampert, D., Fisel, J., Ungen, M., Koo, C. H., Leberle, U., & Neubauer, M. (2022). SDM in der Anwendung - Simulationsgestützte Optimierung wandlungsfähiger Produktionssysteme. SPS-Magazin, 05/22, Article 05/22.
  33. Kienzlen, A., Jaensch, F., Verl, A., & Cheng, L. (2022). Concept for a Reinforcement Learning Approach to Navigate Catheters Through Blood Vessels. 2022 28th International Conference on Mechatronics and Machine Vision in Practice (M2VIP). https://doi.org/10.1109/M2VIP55626.2022.10041096
  34. Kirchhof, J. C., Malcher, L., Michael, J., Rumpe, B., & Wortmann, A. (2022). Web-Based Tracing for Model-Driven Applications. 2022 48th Euromicro Conference on Software Engineering and Advanced Applications (SEAA), 374--381.
  35. Kirchhof, J. C., Kleiss, A., Michael, J., Rumpe, B., & Wortmann, A. (2022). Efficiently Engineering IoT Architecture Languages—An Experience Report (Poster). Proceedings MESS’22: International workshop on MDE for Smart IoT Systems, 1613, 0073.
  36. Kleiner, B. (2022). Radarbasierte Terrainerfassung zur vorausschauenden Steuerung aktiver Prothesen der unteren Extremitäten. In Stuttgarter Beiträge zur Produktionsforschung (148148, Fraunhofer-Institut für Produktionstechnik und Automatisierung IPA; Nummer 148148). https://doi.org/10.18419/opus-12567
  37. Klingel, L., Kamm, V., & Verl, A. (2022, September). Comparison and Application of Multi-Rate Methods for Real-Time Simulations of Production Systems. Proceedings of the 63rd International Conference of Scandinavian Simulation Society. https://doi.org/10.3384/ecp192008
  38. Klingel, L., Penter, L., Mayer, P., Ihlenfeldt, S., & Verl, A. (2022). Digital Twins in deep drawing for virtual tool commissioning and inline parameter optimization. IOP Conference Series: Materials Science and Engineering. https://doi.org/10.1088/1757-899X/1238/1/012072
  39. Koo, C. H. (2022). Runtime safety assessment & assurance for adaptable production systems. In Beiträge zum Stuttgarter Maschinenbau (55; Nummer 55). Fraunhofer Verlag.
  40. Kovaleva, D., Nistler, M., Blandini, L., Sobek, W., & Verl, A. (2022). Rezyklierbare Sandschalungen – Auf dem Weg zur Kreislaufproduktion leichter Betonbauteile. Beton- und Stahlbetonbau, 117(5), Article 5. https://doi.org/10.1002/best.202200009
  41. Kovaleva, D., Nistler, M., Verl, A., Blandini, L., & Sobek, W. (2022). Zero-Waste Production of Lightweight Concrete Structures with Water-Soluble Sand Formwork. In R. Buswell, A. Blanco, S. Cavalaro, & P. Kinnell (Hrsg.), Proceedings of the 3rd RILEM International Conference on Digital Fabrication with Concrete (Digital Concrete 2022) (S. 3--8). Springer International Publishing.
  42. Kretschmer, F. (2022). Architektur für einen Verzeichnisdienst in der serviceorientierten Produktionstechnik. In Beiträge zum Stuttgarter Maschinenbau (11, Fraunhofer Verlag; Nummer 11). https://doi.org/10.18419/opus-12054
  43. Kübler, K. (2022). Methodik für eine ganzheitliche Testautomatisierung beim Systemtest von automatisierten Fertigungssystemen. In Beiträge zum Stuttgarter Maschinenbau (99; Nummer 99). Fraunhofer Verlag.
  44. Littfinski, D., & Verl, A. (2022). Virtual Reality  in der Steuerungstechnik. wt Werkstattstechnik online, 112(09), Article 09. https://doi.org/doi.org/10.37544/1436-4980-2022-09
  45. Lässig, N., Herschel, M., Reichle, A., Ellwein, C., & Verl, A. (2022). The ArchIBALD Data Integration Platform: Bridging Fragmented Processes in the Building Industry. In J. De Weerdt & A. Polyvyanyy (Hrsg.), Intelligent Information Systems (S. 45--54). Springer International Publishing.
  46. May, M., Fisel, J., & Neubauer, M. (2022). Forschungsprojekt zu SDM-basierter Produktion – Die Beherrschung der Wandlungsfähigkeit. SPS-Magazin, 04/22, Article 04/22.
  47. Mesmer, P., Hinze, C., Lechler, A., & Verl, A. (2022). Gain-Scheduled Drive-based Damping Control for Industrial Robots. 2022 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM), 1706–1713. https://doi.org/10.1109/AIM52237.2022.9863417
  48. Mesmer, P., Lechler, A., & Verl, A. (2022). Genauigkeit von Robotern steigern. INDUSTRIAL Production, 11/2022, 46–47.
  49. Mesmer, P., Lechler, A., & Verl, A. (2022). Sensorlose Hysteresekompensation von Industrierobotern. antriebstechnik, 08/2022, 40–42.
  50. Mesmer, P., Nagel, P., Lechler, A., & Verl, A. (2022). Modeling and Identification of Hysteresis in Robot Joints with Cycloidal Drives. 2022 IEEE 17th International Conference on Advanced Motion Control (AMC), 358–363. https://doi.org/10.1109/AMC51637.2022.9729274
  51. Mesmer, P., Neubauer, M., Lechler, A., & Verl, A. (2022). Robust design of independent joint control of industrial robots with secondary encoders. Robotics and Computer-Integrated Manufacturing, 73, 102232. https://doi.org/10.1016/j.rcim.2021.102232
  52. Mesmer, P., Riedel, P., Lechler, A., & Verl, A. (2022). Investigation and Compensation of Hysteresis in Robot Joints with Cycloidal Drives. In T. Schüppstuhl, K. Tracht, & J. Fleischer (Hrsg.), Annals of Scientific Society for Assembly, Handling and Industrial Robotics (S. angenommen, noch nicht veröffentlicht). Springer Berlin Heidelberg.
  53. Michael, J., Pfeiffer, J., Rumpe, B., & Wortmann, A. (2022). Integration Challenges for Digital Twin Systems-of-Systems. 2022 IEEE/ACM 10th International Workshop on Software Engineering for Systems-of-Systems and Software Ecosystems (SESoS), 9–12. https://doi.org/10.1145/3528229.3529384
  54. Neher, P., Lechler, A., & Verl, A. (2022). Experimental Evaluation of the Deterministic Wireless Communication System Industrial LTE. 2022 8th International Conference on Mechatronics and Robotics Engineering (ICMRE), 157–162. https://doi.org/10.1109/ICMRE54455.2022.9734108
  55. Neher, P., Lechler, A., & Verl, A. (2022). Identification and Classification of the Communication Data of Automated Guided Vehicles and Autonomous Mobile Robots. 2022 8th International Conference on Automation, Robotics and Applications (ICARA), 68–75. https://doi.org/10.1109/ICARA55094.2022.9738572
  56. Neubauer, M., Ellwein, C., & Frick, F. (2022). Kontinuität  das neue Paradigma. Computer&Automation, 4/2022, 28–31. https://www.computer-automation.de/unternehmensebene/produktionssoftware/kontinuitaet-das-neue-paradigma.195461.html
  57. Neubauer, M., Frick, F., Ellwein, C., Lechler, A., & Verl, A. (2022). Software-defined Manufacturing - Ein Paradigmenwechsel für die industrielle Produktion. wt Werkstatttechnik online, 112(6), Article 6. https://doi.org/10.37544/1436–4980–2022–6–33
  58. Neubauer, M., Klingel, L., & Reiff, C. (2022). Forschungsinstitut baut Fabrik der Zukunft - Maschinenfabrik Made in Stuttgart. SPS-Magazin, 10/22, Article 10/22.
  59. Neumann, R., & Neubauer, M. (2022). Forschungsinstitut baut Fabrik der Zukunft - Abbildung mit Verwaltungsschalen. SPS-Magazin, 11/2022, Article 11/2022.
  60. Nistler, M., Kovaleva, D., Tepper, L., Blandini, L., Sobek, W., & Verl, A. (2022). Camera-based Process Monitoring for Powder Bed Additive Manufacturing in Construction. Procedia CIRP, 107, 534--539. https://doi.org/10.1016/j.procir.2022.05.021
  61. Pfeifer, D., Scheifele, C., & Neubauer, M. (2022). Use-Case für virtualisierte Steuerungstechnik – Einfacher zum Digital Twin. SPS-Magazin, 07/22, Article 07/22.
  62. Pfeiffer, J., Lehner, D., Wortmann, A., & Wimmer, M. (2022). Modeling Capabilities of Digital Twin Platforms - Old Wine in New Bottles? Journal of Object Technolgy, 21(3), Article 3.
  63. Reichenbach, T., Trautwein, F., Pott, A., & Verl, A. (2022). Parallele Seilroboter: Endlose Rotation durch Hybridstruktur. Fachtagung VDI MECHATRONIK 2022. https://doi.org/10.26083/TUPRINTS-00020963
  64. Reichle, A., Ellwein, C., & Verl, A. (2022). Adaptive CAM planning to support co-design in the building industry. In N. Anwer (Hrsg.), Procedia CIRP (Bd. 109, S. 78–83). https://doi.org/10.1016/j.procir.2022.05.217
  65. Reiff, C., & Neubauer, M. (2022). Forschungsinstitut baut Fabrik der Zukunft - Durchgängige Daten-Pipelines. SPS-Magazin, 13/23, Article 13/23.
  66. Schmucker, B., Trautwein, F., Hartl, R., Lechler, A., Zaeh, M. F., & Verl, A. (2022). Online Parameterization of a Milling Force Model using an Intelligent System Architecture and Bayesian Optimization. Procedia CIRP, 107, 1041--1046. https://doi.org/10.1016/j.procir.2022.05.105
  67. Schulte, A., Lechler, A., & Verl, A. (2022). Impact Actuator for Increased Dynamics. IECON 2022 – 48th Annual Conference of the IEEE Industrial Electronics Society, 1–6. https://doi.org/10.1109/IECON49645.2022.9968593
  68. Schütz, A., Lechler, A., & Verl, A. (2022). Modelling for Control of Vacuum Grippers in automatically reconfigurable Fixturing Systems for thin-walled Workpieces. Procedia CIRP, 115, 226–231. https://doi.org/10.1016/j.procir.2022.10.078
  69. Sherkat, S., Wortmann, T., & Wortmann, A. (2022). Potentials of Symbolic AI Planning for Construction. Proceedings of 33. Forum Bauinformatik.
  70. Sommer, P. (2022). Mehrwertdienstbasiertes Assistenzsystem mittels virtueller und erweiterter Realität an Maschinenfenstern von Werkzeugmaschinen. In Beiträge zum Stuttgarter Maschinenbau (1313; Nummer 1313). Fraunhofer Verlag.
  71. Sommer, S. (2022). Methode zur automatisierten Durchführung von Knowledge Discovery Projekten für die Qualitätsanalyse von fertigungstechnisch hergestellten Produkten. In Beiträge zum Stuttgarter Maschinenbau (33; Nummer 33). Fraunhofer Verlag.
  72. Spenrath, F. (2022). Heuristisches Suchverfahren für die effiziente Planung zum Greifen ungeordnet gelagerter Werkstücke mit Industrierobotern. In Stuttgarter Beiträge zur Produktionsforschung (137137, Fraunhofer-Institut für Produktionstechnik und Automatisierung IPA; Nummer 137137). https://doi.org/10.18419/opus-12612
  73. Stoll, J. T. (2022). Entwicklung und Analyse nachgiebiger pneumatischer Drehantriebe. In Stuttgarter Beiträge zur Produktionsforschung (146146, Fraunhofer-Institut für Produktionstechnik und Automatisierung IPA; Nummer 146146). https://doi.org/10.18419/opus-12611
  74. Strljic, D., Kienzlen, A., & Riedel, O. (2022). Formale Sprachen für Fabriksimulation/Comparative Analysis of Description Models and Languages for Factory Simulation -- Formal Languages for Factory Simulation. wt Werkstattstechnik online, 112(04), Article 04. https://doi.org/10.37544/1436-4980-2022-04-21
  75. Strljic, M. M., Younes, I., Ellwein, C., & Riedel, O. (2022). Empirical Study on General Purpose Cloud Manufacturing Platforms. Proceedings of WCSE 2022 Spring Event: 2022 9th International Conference on Industrial Engineering and Applications. https://doi.org/10.18178/wcse.2022.04.103
  76. Tinsel, E.-F., & Riedel, O. (2022). A Virtual Assistant System for the Requirements Elicitation and Initial Simulation Model Variant Generation of Modular Industrial Plants. 2022 28th International Conference on Mechatronics and Machine Vision in Practice (M2VIP), 1–4. https://doi.org/10.1109/M2VIP55626.2022.10041099
  77. Tinsel, E.-F., & Verl, Prof. Dr.-I. A. (2022). A simulation model extension to enable continuous control tests during the Virtual Commissioning. Procedia CIRP, 112, 97--102. https://doi.org/10.1016/j.procir.2022.09.046
  78. Verl, A., & Steinle, L. (2022). Adaptive compensation of the transmission errors in rack-and-pinion drives. CIRP Annals, 71(1), Article 1. https://doi.org/10.1016/j.cirp.2022.03.026
  79. von Arnim, C., Gessner, G., Jarwitz, M., Lechler, A., & Riedel, O. (2022). Updating the Linux TAPRIO Scheduler in Deterministic Time. 2022 IEEE 27th International Conference on Emerging Technologies and Factory Automation (ETFA), 1–7. https://doi.org/10.1109/ETFA52439.2022.9921594
  80. von Arnim, C., Lechler, A., & Riedel, O. (2022). Planning an updated isochronous real-time schedule for a reconfiguration without interrupting the real-time communication. In Kommunikation in der Automation : Beiträge des Jahreskolloquiums KommA 2022 (Bd. 13, S. 18–27). https://doi.org/10.25644/a4ws-9a49
  81. von Bergen, T., Hert, C., Röck, S., Klingel, L., Jaensch, F., & Verl, A. (2022). Simulationsgestützter Betrieb von Indoor-Flugrobotern. wt Werkstattstechnik online, 112(05), Article 05. https://doi.org/doi.org/10.37544/1436-4980-2022-05
  82. Vorderer, M. (2022). Neuartiges Steuerungs- und Anlagenkonzept für die wandlungsfähige Montagetechnik. In Beiträge zum Stuttgarter Maschinenbau (77; Nummer 77). Fraunhofer Verlag.
  83. Wolf, M., Kaiser, B., Hügle, S., Verl, A., & Middendorf, P. (2022). Data Model for Adaptive Robotic Construction in Architecture. Procedia CIRP, 107, 1035–1040. https://doi.org/10.1016/j.procir.2022.05.104
  84. Wulle, F., Gorke, O., Schmidt, S., Nistler, M., Tovar, G. E. M., Riedel, O., Verl, A., Weber, A., & Southan, A. (2022). Multi-axis 3D printing of gelatin methacryloyl hydrogels on a non-planar surface obtained from magnetic resonance imaging. Additive Manufacturing, 50, 102566. https://doi.org/10.1016/j.addma.2021.102566
  85. Zahn, P., & Neubauer, M. (2022). Use-Case: Datenbasierte Dienste mit einheitlichen Werkzeugen – Mehrwert der Datenfusion. SPS-Magazin, 08/22, Article 08/22.
  86. Zürn, M., Wnuk, M., Lechler, A., & Verl, A. (2022). Software Architecture For Deformable Linear Object Manipulation: A Shape Manipulation Case Study. 2022 IEEE/ACM 4th International Workshop on Robotics Software Engineering (RoSE), 9–16. https://doi.org/10.1145/3526071.3527520
  87. Zürn, M., Wnuk, M., Schneider, A., Lechler, A., & Verl, A. (2022). Localization and Tracking of Deformable Linear Objects with Self Organizing Maps. Proceedings of the 54th International Symposium on Robotics (ISR), 17–25.

2021

  1. Brenner, F., Lechler, A., & Verl, A. (2021). Acceleration-based disturbance compensation for elastic rack-and-pinion drives. Production Engineering - Research and Development. https://doi.org/10.1007/s11740-021-01068-w
  2. Brenner, F., Lechler, A., & Verl, A. (2021). Störgrößenkompensation für Vorschubantriebe. wt Werkstattstechnik online, 111(1), Article 1.
  3. Ellwein, C., Krimstein, V., & Riedel, O. (2021). Ambiguity Tolerant Commissioning Ontology: Targeting Client Communication. 2021 IEEE International Conference on Engineering, Technology and Innovation (ICE/ITMC), 1–9. https://doi.org/10.1109/ICE/ITMC52061.2021.9570239
  4. Ellwein, C., Reichle, A., Herschel, M., & Verl, A. (2021). Integrative data processing for cyber-physical off-site and on-site construction promoting co-design. Procedia CIRP, 100, 451–456. https://doi.org/10.1016/j.procir.2021.05.103
  5. Ellwein, C., Xu, A., Schniering, B., Nötzel, V., & Wüseke, F. (2021). Digitale Prozesslenkung mit ToolProduction. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 116(11), Article 11. https://doi.org/10.1515/zwf-2021-0175
  6. Elser, A. (2021). Formgießen: Modellbasierte Numerische Steuerung. In GIESSEREI PRAXIS (Bd. 108, S. 80–81). https://www.giesserei-praxis.de/news-artikel/artikel/gesamtausgabe-giesserei-praxis-09-10-2021
  7. Elser, A., & Lechler, A. (2021). Implementation of a Model Based Numerical Control for the Gravity Die Casting Process. 2021 22nd IEEE International Conference on Industrial Technology (ICIT), 1, 1094–1099. https://doi.org/10.1109/ICIT46573.2021.9453492
  8. Fischer, M., & Alber, S. (2021). Hightech im Brownfield - Retrofit mit Funktechnologien. https://service-and-maintenance.com/rft/hightech-im-brownfield/
  9. Fischer, M., Riedel, O., & Lechler, A. (2021). Arithmetic Coding for Floating-Points and Elementary Mathematical Functions. In IEEE (Hrsg.), 2021 5th International Conference on System Reliability and Safety (ICSRS) (S. 270–275). https://doi.org/10.1109/ICSRS53853.2021.9660663
  10. Fischer, M., Riedel, O., Lechler, A., & Verl, A. (2021). Arithmetic Coding for Floating-Point Numbers. 2021 IEEE Conference on Dependable and Secure Computing (DSC), 01–08. https://doi.org/10.1109/DSC49826.2021.9346236
  11. Friedl, S., Heinemann, T., Lechler, A., & Riedel, O. (2021). Implicit Templates for Conformance Units in OPC UA Companion Specifications. 2021 22nd IEEE International Conference on Industrial Technology (ICIT), 1, 730–735. https://doi.org/10.1109/ICIT46573.2021.9453582
  12. Fröhlich, T. (2021). Konzeption, Konstruktion und Evaluierung einer Dreiachskinematik als Kopf- und Torsogelenk eines Serviceroboters. In Stuttgarter Beiträge zur Produktionsforschung (127127, Fraunhofer-Institut für Produktionstechnik und Automatisierung IPA; Nummer 127127). https://doi.org/10.18419/opus-11731
  13. Fur, S., Riedel, O., & Verl, A. (2021). Hybrid Commissioning of Production Plants. 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA ), 1–6. https://doi.org/10.1109/ETFA45728.2021.9613256
  14. Getto, S. (2021). Entwicklung eines thermografischen Verfahrens zur Defektdetektion bei Eisenbahnrädern. In Stuttgarter Beiträge zur Produktionsforschung (131131, Fraunhofer-Institut für Produktionstechnik und Automatisierung IPA; Nummer 131131). https://doi.org/10.18419/opus-11807
  15. Heiland, S., Klingel, L., Penter, L., Jaensch, F., Schenke, C., Ihlenfeldt, S., & Verl, A. (2021). Virtual Tool Commissioning using LS-DYNA Functional Mock-up Interface. https://www.dynalook.com/conferences/13th-european-ls-dyna-conference-2021/simulation-methods/heiland_tu_dresden.pdf
  16. Heinemann, T., Friedl, S., & Lechler, A. (2021). Interoperabilität für OPC UA Spezifikationen. In WT Werkstattstechnik online (Ausgabe 5-2021; Nummer Ausgabe 5-2021, S. 324–329). VDI Fachmedien GmbH & Co. KG. https://www.ingenieur.de/fachmedien/wt-werkstattstechnik/ausgaben-wt-werkstattstechnik-online/inhalte-der-online-ausgabe-5-2021/
  17. Helfesrieder, N., Lechler, A., & Verl, A. (2021). Strukturoptimierte Maschinenkomponenten mit hoher Dämpfung. Antriebstechnik, 3/2021(3), Article 3. http://digital.antriebstechnik.de/antriebstechnik-3-2020/65318893/40
  18. Helfesrieder, N., Neubauer, M., Lechler, A., & Verl, A. (2021). Hybrid manufacturing of topology optimized machine tool parts through a layer laminated manufacturing method: Practical validation using the example of a bearing block. Production Engineering Research and Development. https://doi.org/10.1007/s11740-021-01095-7
  19. Henzel, R., Ellwein, C., Herzwurm, G., & Riedel, O. (2021). Cloud manufacturing: Theoretical localization within production theory. Procedia CIRP, 99, 555--560. https://doi.org/10.1016/j.procir.2021.03.076
  20. Jaensch, F., Steidle, A., & Verl, A. (2021). Curriculum Multi-Stage Reinforcement Learning for Automated Interlinked Production Systems on Virtual Commissioning Simulations. 2021 Third International Conference on Transdisciplinary AI (TransAI), 129–136. https://doi.org/10.1109/TransAI51903.2021.00031
  21. Kaiser, B. (2021). Replication data for: Planning of Curvature-Optimal Smooth Paths for Industrial Robots Using Neural Networks. https://doi.org/10.18419/darus-2126
  22. Kaiser, B., Littfinski, D., & Verl, A. (2021). Automatic Generation of Digital Twin Models for Simulation of Reconfigurable Robotic Fabrication Systems for Timber Prefabrication. In C. Feng, T. Linner, I. Brilakis, D. Castro, P.-H. Chen, Y. Cho, J. Du, S. Ergan, B. Garcia de Soto, J. Gašparík, F. Habbal, A. Hammad, K. Iturralde, T. Bock, S. Kwon, Z. Lafhaj, N. Li, C.-J. Liang, B. Mantha, … Z. Zhu (Hrsg.), Proceedings of the 38th International Symposium on Automation and Robotics in Construction (ISARC) (S. 717–724). International Association for Automation and Robotics in Construction (IAARC). https://doi.org/10.22260/ISARC2021/0097
  23. Kaiser, B., Strobel, T., & Verl, A. (2021). Human-Robot Collaborative Workflows for Reconfigurable Fabrication Systems in Timber Prefabrication using Augmented Reality. M2VIP, 576–581. http://dblp.uni-trier.de/db/conf/m2vip/m2vip2021.html#KaiserSV21
  24. Kaiser, B., & Verl, A. (2021). Planning of Curvature-Optimal Smooth Paths for Industrial Robots Using Neural Networks. 2021 4th International Conference on Artificial Intelligence for Industries (AI4I), 10–15. https://doi.org/10.1109/AI4I51902.2021.00011
  25. Kienzlen, A., & Verl, A. (2021). Konzept zur Integration eines kontinuierlichen Materialflussmodells in die Virtuelle Inbetriebnahme durch Signalgenerierung. In J. Franke & P. Schuderer (Hrsg.), Simulation in Produktion und Logistik 2021 (S. 585--594). Cuvillier Verlag.
  26. Lehner, D., Pfeiffer, J., Tinsel, E.-F., Strljic, M. M., Sint, S., Vierhauser, M., Wortmann, A., & Wimmer, M. (2021). Digital Twin Platforms: Requirements, Capabilities, and Future Prospects. IEEE Software, 01, Article 01. https://doi.org/10.1109/MS.2021.3133795
  27. Mesmer, P., Lechler, A., & Verl, A. (2021). Genauigkeitssteigerung von Industrierobotern - Methoden zur Hysteresekompensation. Robotik und Produktion, 09/2021, 26–27.
  28. Mesmer, P., Neubauer, M., Lechler, A., & Verl, A. (2021). Challenges of Linearization-based Control of Industrial Robots with Cycloidal Drives. 2021 IEEE International Conference on Mechatronics (ICM). 2021 IEEE International Conference on Mechatronics (ICM), Kashiwa, Japan.
  29. Miermeister, P. R. (2021). Model selection and parameter optimization for cable-driven parallel robots. In Stuttgarter Beiträge zur Produktionsforschung (128128, Fraunhofer-Institut für Produktionstechnik und Automatisierung IPA; Nummer 128128). https://doi.org/10.18419/opus-11732
  30. Neubauer, M., Brenner, F., Hinze, C., & Verl, A. (2021). Cascaded sliding mode position control (SMC-PI) for an improved dynamic behavior of elastic feed drives. International Journal of Machine Tools and Manufacture. https://doi.org/10.1016/j.ijmachtools.2021.103796
  31. Neubauer, M., & Lechler, A. (2021). Software-defined Manufacturing für die Industrie. SPS-Magazin, 2021(12), Article 12.
  32. Neubauer, M., Lechler, A., & Verl, A. (2021). Genauigkeits- und Dynamiksteigerung bei Industrierobotern: Auf die Dämpfung kommt es an. Industrieanzeiger, 2021(1), Article 1.
  33. Neubauer, M., & Meier, M. (2021). Forschungsprojekt entwickelt Software-defined Manufacturing: Autoindustrie setzt Fertigung neu auf. SPS-Magazin, 2021(13), Article 13.
  34. Neubauer, M., Mesmer, P., Lechler, A., & Verl, A. (2021). Schwingungsdämpfung am Industrieroboter: Ein semiaktiver Ansatz zur Verbesserung des dynamischen Verhaltens. wt Werkstatttechnik online, 111(9), Article 9. https://doi.org/10.37544/1436-4980-2021-09-48
  35. Nägele, F. (2021). Prototypbasiertes Skill-Modell zur Programmierung von Robotern für kraftgeregelte Montageprozesse. In Stuttgarter Beiträge zur Produktionsforschung (121121, Fraunhofer Verlag; Nummer 121121). https://doi.org/10.18419/opus-11655
  36. Pfeiffer, J., & Wortmann, A. (2021). Towards the Black-Box Aggregation of Language Components. 2021 ACM/IEEE International Conference on Model Driven Engineering Languages and Systems Companion (MODELS-C), 576–585. https://doi.org/10.1109/MODELS-C53483.2021.00088
  37. Prinz, F. (2021). Wandelbare, echtzeitfähige Kommunikationsinfrastruktur für Cyber-Physische Produktionssysteme. In Stuttgarter Beiträge zur Produktionsforschung (125125, Fraunhofer Verlag; Nummer 125125). https://doi.org/10.18419/opus-11730
  38. Qi, Y., Zhong, R., Kaiser, B., Tahouni, Y., Wagner, H. J., Verl, A., & Menges, A. (2021). Augmented Accuracy: A Human-Machine Integrated Adaptive Fabrication Workflow for Bamboo. In V. Stojakovic & B. Tepavcevic (Hrsg.), Proceedings of the 39th eCAADe Conference (Bd. 1, S. 345--354). Cumincad. http://papers.cumincad.org/cgi-bin/works/paper/ecaade2021_169
  39. Reichenbach, T., Rausch, K., Trautwein, F., Pott, A., & Verl, A. (2021). Velocity Based Hybrid Position-Force Control of Cable Robots and Experimental Workspace Analysis. In M. Gouttefarde, T. Bruckmann, & A. Pott (Hrsg.), Cable-Driven Parallel Robots (S. 230--242). Springer International Publishing. https://doi.org/10.1007/978-3-030-75789-2_19
  40. Reichenbach, T., & Verl, A. (2021). Seilroboter im prüfenden Blick, Hochdynamikuntersuchung von Seilwinden mit Kunststofffaserseilen. Konstruktion, 4, Article 4.
  41. Reiff, C., Bubeck, W., Krawczyk, D., Steeb, M., Lechler, A., & Verl, A. (2021). Learning Feedforward Control for Laser Powder Bed Fusion. Procedia CIRP, 96, 127–132. https://doi.org/10.1016/j.procir.2021.01.064
  42. Reiff, C., Buser, M., Betten, T., Onuseit, V., Hoßfeld, M., Wehner, D., & Riedel, O. (2021). A Process-Planning Framework for Sustainable Manufacturing. Energies, 14(18), Article 18. https://doi.org/10.3390/en14185811
  43. Schmidt, A., Kotschote, C., & Riedel, O. (2021). Supervised learning based observer for in-process tool offset estimation in robotic arc welding applications. 2021 IEEE 17th International Conference on Automation Science and Engineering (CASE), 1991–1996. https://doi.org/10.1109/CASE49439.2021.9551533
  44. Schmidt, A., Kotschote, C., & Riedel, O. (2021). In-Process Workpiece Geometry Estimation for Robotic Arc Welding based on Supervised Learning for Multi-Sensor Inputs. 2021 IEEE International Conference on Robotics and Automation (ICRA), 722–728. https://doi.org/10.1109/ICRA48506.2021.9561500
  45. Schmidt, A., Schellroth, F., Fischer, M., Allimant, L., & Riedel, O. (2021). Reinforcement learning methods based on GPU accelerated industrial control hardware. Neural Computing and Applications. https://doi.org/10.1007/s00521-021-05848-4
  46. Schmucker, B., Trautwein, F., Semm, T., Lechler, Armin., Zaeh, M. F., & Verl, Alexander. (2021). Implementation of an Intelligent System Architecture for Process Monitoring of Machine Tools. Procedia CIRP, 96, 342–346. https://doi.org/10.1016/j.procir.2021.01.097
  47. Schulte, A., Lechler, A., & Verl, A. (2021). Konzeption eines zweiachsigen Impulsaktors. wt Werkstattstechnik online, 111(05), Article 05. https://doi.org/10.37544/1436-4980-2021-05-16
  48. Steinle, L., Lechler, A., Neubauer, M., & Verl, A. (2021). Experimental investigation into the implications of transmission errors for rack‑and‑pinion drives. Production Engineering Research and Development. https://doi.org/10.1007/s11740-021-01090-y
  49. Steinle, L., Lechler, A., & Verl, A. (2021). Antrieb im Gleichlauf. Industrial Production, 8–9, 50–52.
  50. Tasci, T., Fischer, M., Lechler, A., & Verl, A. (2021). Predictable and Real-Time Message-Based Communication in the Context of Control Technology. In P. Weißgraeber, F. Heieck, & C. Ackermann (Hrsg.), Advances in Automotive Production Technology -- Theory and Application (S. 264--271). Springer Berlin Heidelberg. https://doi.org/10.1007/978-3-662-62962-8_31
  51. Tinsel, E.-F., Riedel, O., & Verl, A. (2021). Smartes Assistenzsystem zur Anforderungserhebung. wt Werkstattstechnik online, 111, 295–299. https://doi.org/10.37544/1436-4980-2021-05-29
  52. Trautwein, F., Reichenbach, T., Pott, A., & Verl, A. (2021). Workspace Planning for In-Operation-Reconfiguration of Cable-Driven Parallel Robots. In M. Gouttefarde, T. Bruckmann, & A. Pott (Hrsg.), Cable-Driven Parallel Robots (S. 182--193). Springer International Publishing. https://doi.org/10.1007/978-3-030-75789-2_15
  53. von Arnim, C., Lechler, A., & Riedel, O. (2021). Operations for non-disruptive modification of real-time network schedules. 2021 22nd IEEE International Conference on Industrial Technology (ICIT), 1, 1131–1137. https://doi.org/10.1109/ICIT46573.2021.9453586
  54. Walker, M. (2021). Sichere Integration von Containertechnologien in Steuerungssysteme. SPS-Magazin, 08/2021, Article 08/2021.
  55. Wnuk, M., Hinze, C., Zürn, M., Pan, Q., Lechler, A., & Verl, A. (2021, November). Tracking Branched Deformable Linear Objects With Structure Preserved Registration by Branch-wise Probability Modification. 2021 IEEE 27th International Conference on Machatronics and Machine Vision in Practice.
  56. Wnuk, M., Jaensch, F., Tomzik, D. A., Chen, Z., Terfurth, J., Kandasamy, S., Shahabi, J., Garrett, A., Mahmoudinezhad, M. H., Csiszar, A., Xu, W., Röhrle, O., & Verl, A. (2021). Challenges in Robotic Soft Tissue Manipulation—Problem Identification Based on an Interdisciplinary Case Study of a Teleoperated Drawing Robot in Practice.: Bd. Mechatronics and Machine Vision in Practice 4 (J. Billingsley & B. Peter, Hrsg.; S. 245–262). Springer. https://doi.org/10.1007/978-3-030-43703-9_20
  57. Wnuk, M., Zürn, M., Hinze, C., Lechler, A., & Verl, A. (2021). Simulationsbasierter Beobachter für die Handhabungbiegeschlaffer Bauteile. antriebstechnik, 7, Article 7. https://digital.antriebstechnik.de/antriebstechnik-7-2021/65722079/38
  58. Wulle, F., Richter, M., Hinze, C., & Verl, A. (2021). Time-optimal Path Planning of Multi-axis CNC Processes Using Variability of Orientation. Procedia CIRP, 96, 324--329. https://doi.org/10.1016/j.procir.2021.01.095
  59. Zürn, M., Wnuk, M., Hinze, C., Lechler, A., Verl, A., & Xu, W. (2021). Kinematic Trajectory Following Control For Constrained Deformable Linear Objects. 2021 IEEE 17th International Conference on Automation Science and Engineering (CASE), 1701–1707. https://doi.org/10.1109/CASE49439.2021.9551613
  60. Zürn, M., Wnuk, M., Lechler, A., Steiler, C., Paukner, M., Trommnau, J., Weiß, B., Minsch, N., Mittermeier, M., Hessler, U., & Pollner, R. (2021). Leitungen automatisch im Kfz montieren. Industrial Production, 7, Article 7. https://www.industrial-production.de/montagetechnik/leitungen-automatisch----im-kfz-montieren.htm

2020

  1. Alkhouri, K., Sikora, A., Neher, P., & Frick, F. (2020). Time Synchronization for Time Sensitive Networks. Proceedings of embedded world Conference 2020. Embedded World 2020, Nürnberg.
  2. Beuke, F. (2020). Online motion planning for dual arm industrial robots. In Stuttgarter Beiträge zur Produktionsforschung (9898, Fraunhofer Verlag; Nummer 9898). https://doi.org/10.18419/opus-10807
  3. Borisov, A. (2020). Konzept für eine sichere und benutzerfreundliche Authentifizierung für industrielle Produktionsanlagen. In Stuttgarter Beiträge zur Produktionsforschung (101101, Fraunhofer Verlag; Nummer 101101). https://doi.org/10.18419/opus-10878
  4. Brenner, F., Verl, A., & Lechler, A. (2020). Störgrößenschätzung in Zahnstange-Ritzel-Antrieben. Maschinenmarkt, MM, 19, Article 19. https://www.maschinenmarkt.vogel.de/stoergroessenschaetzung-in-zahnstange-ritzel-antrieben-a-976503/
  5. Brovkina, D., Kienzlen, A., & Riedel, O. (2020). Comparative Analysis of Factory Simulation Description Models for Comprehensive Description of Model Design. 2020 IEEE Eurasia Conference on IOT, Communication and Engineering (ECICE), 318–321. https://doi.org/10.1109/ECICE50847.2020.9301947
  6. Butov, A. (2020). Entwicklung eines modularen und stückzahlflexiblen Qualitätskonzepts für schwere Nfz-Hybridgetriebe. In Stuttgarter Beiträge zur Produktionsforschung (111111, Fraunhofer Verlag; Nummer 111111). https://doi.org/10.18419/opus-11191
  7. Christodoulopoulos, K., Lautenschlaeger, W., Frick, F., Benzaoui, N., Henke, T., Gebhard, U., Dembeck, L., Lechler, A., Pointurier, Y., & Bigo, S. (2020). Enabling the Scalability of Industrial Networks by Independent Scheduling Domains. Optical Fiber Communication Conference (OFC) 2020, Th2A.24. https://doi.org/10.1364/OFC.2020.Th2A.24
  8. Defranceski, A. (2020). Bewertung elektroadhäsiver Greifer für die industrielle Handhabung von Blechteilen. In Stuttgarter Beiträge zur Produktionsforschung (115115, Fraunhofer Verlag; Nummer 115115). https://doi.org/10.18419/opus-11192
  9. Diaz Posada, J. R. (2020). Optimized model-based path generation for robotic manufacturing processes. In Stuttgarter Beiträge zur Produktionsforschung (106106, Fraunhofer Verlag; Nummer 106106). https://doi.org/10.18419/opus-11011
  10. Domnich, A. (2020). Methode zur Bestimmung des Gefäßverengungsgrades aus der Pulswellencharakteristik am Beispiel implantierbarer Sensorik für den Stent. In Stuttgarter Beiträge zur Produktionsforschung (114114, Fraunhofer Verlag; Nummer 114114). https://doi.org/10.18419/opus-11078
  11. Dripke, C., Schöbel, D., & Verl, A. (2020). Distributed Interpolation: Synchronization of motion-controlled axes with coordination vector and decentralized segment controllers. In IEEE (Hrsg.), IEEE 16th International Workshop on Advanced Motion Control (AMC) (S. 141–146). IEEE.
  12. Dörr, S. (2020). Cloud-based cooperative long-term SLAM for mobile robots in industrial applications. In Stuttgarter Beiträge zur Produktionsforschung (113113, Fraunhofer Verlag; Nummer 113113). https://doi.org/10.18419/opus-11190
  13. Effenberger, I. (2020). Automatisierte Messablauferzeugung und 3D-Datenauswertung in der Multisensor-Koordinatenmesstechnik. In Stuttgarter Beiträge zur Produktionsforschung (109109, Fraunhofer Verlag; Nummer 109109). https://doi.org/10.18419/opus-11012
  14. Eger, F., Reiff, C., Tempel, P., Magnanini, M. C., Caputo, D., Lechler, A., & Verl, A. (2020). Reaching Zero-Defect Manufacturing by Compensation of Dimensional Deviations in the Manufacturing of Rotating Hollow Parts. Procedia Manufacturing, 51, 388--393. https://doi.org/10.1016/j.promfg.2020.10.055
  15. Eger, F., Reiff, C., Lechler, A., & Verl, A. (2020). Weniger Ausschuss bei der Fertigung rotierender Bauteile. wt WerkstattsTechnik, 5, Article 5. https://e-paper.vdi-fachmedien.de/webreader-v3/index.html#/2603/1
  16. Ellwein, C., Elser, A., Vollmer, M., & Riedel, O. (2020). Connected production planning and control systems – implementation and the optimization process for subcontracting. Procedia CIRP, 88, 191–196. https://doi.org/10.1016/j.procir.2020.05.034
  17. Engelberth, T. (2020). Adaptive Verspannung von Zahnstange-Ritzel-Antrieben. In Stuttgarter Beiträge zur Produktionsforschung (9696, Fraunhofer Verlag; Nummer 9696). https://doi.org/10.18419/opus-10744
  18. Fischer, M., Müller, C., & Kolb, C. (2020). Virtualisierung in der Produktionstechnik (atp magazin, Hrsg.). https://atpinfo.de/wp-content/uploads/2020/11/atp11122020_TT_ISW.pdf
  19. Friedl, S., Heinemann, T., & Lechler, A. (2020). Designentscheidungen für OPC-UA-Informationsmodelle/Design Decisions for OPC UA Information Models. wt Werkstattstechnik online, 110(05), Article 05. https://doi.org/10.37544/1436-4980-2020-05-21
  20. Friedl, S., von Arnim, C., Lechler, A., & Verl, A. (2020). Generation of OPC UA Companion Specification with Eclipse Modeling Framework. 2020 16th IEEE International Conference on Factory Communication Systems (WFCS), 1--7.
  21. Fur, S., Boughattas, B., Verl, A., & Pott, A. (2020). Prediction of the configuration of objects in a bin based on synthetic sensor data. Procedia CIRP, 88, 54–59. https://doi.org/10.1016/j.procir.2020.05.010
  22. Helfesrieder, N., Lechler, A., & Verl, A. (2020). Method for generating manufacturable, topology-optimized parts for Laminated Layer Manufacturing. Procedia CIRP, 93, 38--43. https://doi.org/10.1016/j.procir.2020.04.048
  23. Henke, T., Frick, F., Lechler, A., & Verl, A. (2020). Adaptive PWM Modulation for an Increased Energy Efficiency of Industrial Drives. 2020 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), 237–242. https://doi.org/10.1109/SPEEDAM48782.2020.9161851
  24. Hinze, C., Wnuk, M., Zürn, M., Lechler, A., & Verl, A. (2020). Daten-integrierte Simulation. inVision. https://invision-news.de/allgemein/daten-integrierte-simulation-2/
  25. Hinze, C., Zürn, M., Wnuk, M., Lechler, A., & Verl, A. (2020). Nonlinear Trajectory Control for Deformable Linear Objects based on Physics Simulation. IECON 2020 The 46th Annual Conference of the IEEE Industrial Electronics Society, 310–316. https://doi.org/10.1109/IECON43393.2020.9254923
  26. Jaensch, F., & Verl, A. (2020). Virtual Commissioning Simulation as Reinforcement Learning Environment for Robot Cable Handling. 2020 Third International Conference on Artificial Intelligence for Industries (AI4I), 27–31. https://doi.org/10.1109/AI4I49448.2020.00013
  27. Kaiser, B., Breidohr, V., & Verl, A. (2020). Octree-based, multiresolution environment mapping for efficient calculation of collision-free paths for industrial robots. In T. Schüppstuhl, K. Tracht, & D. Henrich (Hrsg.), Annals of Scientific Society for Assembly, Handling and Industrial Robotics (S. 57--67). Springer Berlin Heidelberg.
  28. Keinert, M. (2020). Entwurf partitionierter NC-Steuerungen zur Ausführung auf Multicore-Systemen. In Stuttgarter Beiträge zur Produktionsforschung (103103, Fraunhofer Verlag; Nummer 103103). https://doi.org/10.18419/opus-10905
  29. Kienzlen, A., Scheifele, C., & Verl, A. (2020). Predicting coupling signals in a material flow real-time co-simulation with a Kalman filter. In R. Teti & D. M. D’Addona (Hrsg.), Procedia CIRP (Bd. 88, S. 9--14). Elsevier BV. https://doi.org/10.1016/j.procir.2020.05.002
  30. Kienzlen, A., & Verl, A. (2020). Comparison of Material Flow Models and Acceleration of the Macroscopic Flow Model for Virtual Commissioning. In ETI-EUROSIS (Hrsg.), 34th Annual European Simulation Simulation and Modelling Conference: Modelling and Simulation 2020 (ESM) (S. 168–175).
  31. Kienzlen, A., Weißen, J., Verl, A., & Göttlich, S. (2020). Simulative Optimierung der Steuerungsparameter eines Materialflusslayouts mit Bandförderern. Forschung im Ingenieurwesen. https://doi.org/10.1007/s10010-020-00420-3
  32. Korb, T., Schmidt, A., & Riedel, O. (2020). Evaluierung potenzieller Augmented-Reality-Anwendungsfälle im industriellen Umfeld. Virtual, Augmented und Cross Reality in Praxis und Forschung.
  33. Kuss, A. (2020). Aufgabenorientierte Roboterprogrammierung unter Berücksichtigung von geometrischen Bauteilabweichungen beim Lichtbogenschweißen. In Stuttgarter Beiträge zur Produktionsforschung (119119, Fraunhofer Verlag; Nummer 119119). https://doi.org/10.18419/opus-11247
  34. Lechler, A., & Schmidt, A. (2020). iSrv – Intelligentes Servicesystem. In VDI-Verlag (Hrsg.), Reihe 2: Bd. Fortschritt-Berichte VDI (703; Erste, Nummer 703). VDI-Verlag.
  35. Mesmer, P., Neubauer, M., Lechler, A., & Verl, A. (2020). Ansätze zur Genauigkeits- und Dynamiksteigerung von Industrierobotern mit abtriebsseitiger Winkelerfassung. Antriebstechnik, Sonderausgabe Marktübersicht, 20–22.
  36. Mesmer, P., Neubauer, M., Lechler, A., & Verl, A. (2020). Drive-based Vibration Damping Control for Robot Machining. IEEE Robotics and Automation Letters, 5(2), Article 2. https://doi.org/10.1109/LRA.2019.2960723
  37. Neher, P., & Frick, F. (2020). TSN Endpoints Revisited - Enable your Applications with TSN Using Free Open Source Solutions.
  38. Neubauer, M., Mesmer, P., Lechler, A., & Verl, A. (2020). Dynamisches Verhalten von Industrierobotern - Über das Potenzial von Secondary Encodern zur Vermessung. wt Werkstatttechnik online, 110(3), Article 3.
  39. Qi, Y., Zhong, R., Kaiser, B., Nguyen, L., Wagner, H. J., Verl, A., & Menges, A. (2020). Working with Uncertainties: An Adaptive Fabrication Workflow for Bamboo Structures. In P. F. Yuan, J. Yao, C. Yan, X. Wang, & N. Leach (Hrsg.), Proceedings of the 2020 DigitalFUTURES. Springer Nature Switzerland AG.
  40. Rauschecker, U. M. (2020). Method to configure agile production networks for personalised products based on customisable manufacturing services. In Stuttgarter Beiträge zur Produktionsforschung (104104, Fraunhofer Verlag; Nummer 104104). https://doi.org/10.18419/opus-10948
  41. Scheifele, S. M. (2020). Generierung des Digitalen Zwillings für den Sondermaschinenbau mit Losgröße 1. In Stuttgarter Beiträge zur Produktionsforschung (107107, Fraunhofer Verlag; Nummer 107107). https://doi.org/10.18419/opus-11002
  42. Schindler, M. (2020). System und Methode zur Planung von Produktionssystemen auf Basis der 3D-Digitalisierung bestehender Strukturen mit Farbinformation. In Stuttgarter Beiträge zur Produktionsforschung (100100, Fraunhofer Verlag; Nummer 100100). https://doi.org/10.18419/opus-10879
  43. Schmidt, A., Schellroth, F., & Riedel, O. (2020). Control Architecture for Embedding Reinforcement Learning Frameworks on Industrial Control Hardware. Proceedings of the 3rd International Conference on Applications of Intelligent Systems. https://doi.org/10.1145/3378184.3378198
  44. Schulte, A., Lechler, A., & Verl, A. (2020). Geschwindigkeitssprünge an Vorschubachsen. atp magazin, 62(11–12), Article 11–12. https://doi.org/10.17560/atp.v62i11-12.2517
  45. Schulte, A., Lechler, A., & Verl, A. (2020). Eckenfahrt durch schlagartige Beschleunigung. Antriebstechnik, 09, 58–59.
  46. Schütz, A., Helfesrieder, N., Lechler, A., & Verl, A. (2020). Automatisierte Werkstückfixierung - Formadaptive Aufspannung von Schalenelementen für Bearbeitungsaufgaben mit Industrierobotern. wt Werkstattstechnik online, 110(01–02), Article 01–02. https://www.werkstattstechnik.de/wt/currentarticle.php?dataarticle_id=92636
  47. Straub, D. (2020). Methode zur technischen Auslegung von Vakuumgreifsystemen mit einer Mindesthaltedauer auf Basis fluidischer Untersuchungen. In Stuttgarter Beiträge zur Produktionsforschung (118118, Fraunhofer Verlag; Nummer 118118). https://doi.org/10.18419/opus-11313
  48. Tasci, T., Walker, M., Lechler, A., & Verl, A. (2020). Towards Modular and Distributed Automation Systems – Leveraging Software Containers for Industrial Control. In V. W. GmbH (Hrsg.), Automation 2020 (1. Aufl., Bd. 2375). VDI Verlag.
  49. Tinsel, E.-F., Fur, S., Lechler, A., & Riedel, O. (2020). Durchgängigkeit von Steuerungstests. wt Werkstattstechnik online, 110(5/2020), Article 5/2020. https://e-paper.vdi-fachmedien.de/webreader-v3/index.html#/2603/9
  50. Trautwein, F., Reichenbach, T., Tempel, P., Pott, A., & Verl, A. (2020). COPacabana: A Modular Cable-Driven Parallel Robot. In Sechste IFToMM D-A-CH Konferenz (Bd. 2020). https://doi.org/10.17185/duepublico/71189
  51. Trautwein, F., Reichenbach, T., & Verl, A. (2020). Seilroboter als rekonfigurierbare Handhabungssysteme. In P. Eberhard (Hrsg.), handling (7–8; handling, Nummern 7–8, S. 28–29).
  52. von Arnim, C., Dragan, M., Frick, F., Lechler, A., Riedel, O., & Verl, A. (2020, September). TSN-based Converged Industrial Networks: Evolutionary Steps and Migration Paths. 2020 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). https://doi.org/10.1109/etfa46521.2020.9212057
  53. von Arnim, C., Lechler, A., Riedel, O., & Verl, A. (2020). Fragmentation in Reconfigured Real-time Production Networks. Annals of Scientific Society for Assembly, Handling and Industrial Robotics, 105--115. https://doi.org/10.1007/978-3-662-61755-7_10
  54. Voss, M. (2020). Methode zur Flexibilisierung des Energieverbrauchs von automatischen Hochregallagern. In Stuttgarter Beiträge zur Produktionsforschung (9292, Fraunhofer Verlag; Nummer 9292). https://doi.org/10.18419/opus-10803
  55. Walter, J. R., Saini, H., Maier, B., Mostashiri, N., Aguayo, J. L., Zarshenas, H., Hinze, C., Shuva, S., Köhler, J., Sahrmann, A. S., Chang, C., Csiszar, A., Galliani, S., Cheng, L. K., & Röhrle, O. (2020). Comparative Study of a Biomechanical Model-based and Black-box Approach for Subject-Specific Movement Prediction.
  56. Wnuk, M., Hinze, C., Lechler, A., & Verl, A. (2020). Kinematic Multibody Model Generation of Deformable Linear Objects from Point Clouds. 2020 International Conference on Intelligent Robots and Systems (IROS), 9545–9552. https://doi.org/10.1109/IROS45743.2020.9340887
  57. Wnuk, M., Hinze, C., Zürn, M., Lechler, A., & Verl, A. (2020). Roboterdemonstrator kombiniert Simulation und Bildverarbeitung. Robotik und Produktion, 3, Article 3. https://www.robotik-produktion.de/allgemein/deformiert-kein-problem/
  58. Wohlfeld, A. (2020). Fertigungstechnische Simulationsmethoden für medizinische Assistenzsysteme. In Stuttgarter Beiträge zur Produktionsforschung (112112, Fraunhofer Verlag; Nummer 112112). https://doi.org/10.18419/opus-11013
  59. Wolf, M., Elser, A., Riedel, O., & Verl, A. (2020). A software architecture for a multi-axis additive manufacturing path-planning tool. Procedia CIRP, 88, 433–438. https://doi.org/10.1016/j.procir.2020.05.075
  60. Zahn, P. (2020). Unstetige Bahnerzeugung an Vorschubantrieben mittels trägheitsbasiertem Impulsaktor. In Stuttgarter Beiträge zur Produktionsforschung (105105, Fraunhofer Verlag; Nummer 105105). https://doi.org/10.18419/opus-11001
  61. Zahn, P., Schulte, A., & Verl, A. (2020). Impact‑based feed drive actuator for discontinuous motion profiles. Production Engineering Research and Development, 14(2), Article 2. https://doi.org/10.1007/s11740-020-00950-3
  62. Zürn, M., Hinze, C., Wnuk, M., Lechler, A., & Verl, A. (2020). Modellbasierte Regelung. Robotik und Produktion. https://www.industrial-production.de/industrieroboter/bilder/modellbasierte-regelung-1.htm

2019

  1. Apprich, S. (2019). Untersuchung des posenabhängigen dynamischen Strukturverhaltens großer Werkzeugmaschinen. In Stuttgarter Beiträge zur Produktionsforschung (8686, Fraunhofer Verlag; Nummer 8686). https://doi.org/10.18419/opus-10565
  2. Bix, J. (2019). Mobile Robotik in der bandsynchronen Montage zur flexiblen Mensch-Roboter-Interaktion. In Stuttgarter Beiträge zur Produktionsforschung (8888, Fraunhofer Verlag; Nummer 8888). https://doi.org/10.18419/opus-10462
  3. Coupek, D. (2019). Kompensation von Magnetisierungsabweichungen in Permanentmagnet-Synchronmotoren durch selektive Rotormontage. In Stuttgarter Beiträge zur Produktionsforschung (8787, Fraunhofer Verlag; Nummer 8787). https://doi.org/10.18419/opus-10455
  4. Dietz, T. (2019). Knowledge-based cost-benefit analysis of robotics for SME-like manufacturing. In Stuttgarter Beiträge zur Produktionsforschung (8585, Fraunhofer Verlag; Nummer 8585). https://doi.org/10.18419/opus-10463
  5. Dripke, C., Sun, Y., & Verl, A. (2019). Framework for the Closed-Form Calculation of Forward and Inverse Kinematics for Basic Kinematics in Reconfigurable Multi-Component Systems. Proceedings of the 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 687–694.
  6. Dripke, C., Ye, Z., & Verl, A. (2019). Synchronization of a distributed interpolation application via cross-coupled control. IEEE International Conference on Engineering, Technology and Innovation (ICE/ITMC). https://doi.org/10.1109/ICE.2019.8792616
  7. Eger, F., Tempel, P., Magnanini, M. C., Reiff, C., Colledani, M., & Verl, A. (2019). Part Variation Modeling in Multi-Stage Production Systems for Zero-Defect Manufacturing. 2019 IEEE International Conference on Industrial Technology (ICIT), 1017–1022. https://doi.org/10.1109/ICIT.2019.8754964
  8. Ellwein, C., & Elser, A. (2019). Vernetzte Produktionsplanung. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 114(12), Article 12. https://doi.org/10.3139/104.112195
  9. Ellwein, C., Elser, A., & Riedel, O. (2019). Production planning and control systems – a new software architecture Connectivity in target. Procedia CIRP, 79, 361–366. https://doi.org/10.1016/j.procir.2019.02.089
  10. Ellwein, C., Neff, S., & Verl, A. (2019). Cloud Manufacturing: An Automated Literature Review. Procedia CIRP, 86, 251–256. https://doi.org/10.1016/j.procir.2020.01.006
  11. Ellwein, C., Schmidt, A., Lechler, A., & Riedel, O. (2019). Distributed Manufacturing: A Vision About Shareconomy in the Manufacturing Industry. Proceedings of the 2019 3rd International Conference on Automation, Control and Robots, 90--95. https://doi.org/10.1145/3365265.3365270
  12. Elser, A., & Königs, M. (2019). HybridCAM: Durchgängiger Informationsfluss in der hybriden Fertigung. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb.
  13. Engelberth, T., Neubauer, M., & Verl, A. (2019). Master-Switch für verspannte Zahnstange-Ritzel-Antriebe. atp magazin, 61(3), Article 3. https://doi.org/10.17560/atp.v61i3.2389
  14. Engelberth, T., & Verl, A. (2019). Adaptive Verspannung von Zahnstange-Ritzel-Antrieben. wt Werkstattstechnik online, 109(5), Article 5. https://www.werkstattstechnik.de/wt/currentarticle.php?dataarticle_id=91750
  15. Frick, F., & Neher, P. (2019). Open Source TSN. SPS Magazin, 32. Jahrgang(11/2019), Article 11/2019.
  16. Friedrich, C. (2019). Robotermanipulationsfähigkeiten zur Automatisierung von Instandhaltungsaufgaben. In Stuttgarter Beiträge zur Produktionsforschung (8989, Fraunhofer Verlag; Nummer 8989). https://doi.org/10.18419/opus-10566
  17. Garcia Lopez, F. (2019). Predictive and cooperative online motion planning: a contribution to networked mobile robot navigation in industrial applications. In Stuttgarter Beiträge zur Produktionsforschung (9393, Fraunhofer Verlag; Nummer 9393). https://doi.org/10.18419/opus-10715
  18. Gerlach, O. (2019). Untersuchung von Messgliedern zur Erfassung der Regelgröße beim Erwärmen für das Thixoschmieden. In Stuttgarter Beiträge zur Produktionsforschung (9191, Fraunhofer Verlag; Nummer 9191). https://doi.org/10.18419/opus-10708
  19. Heinemann, T., Lechler, A., Riedel, O., & Verl, A. (2019). Vermeidung von Nothalten von fahrerlosen Transportfahrzeugen durch lokale Bahnplanung. In J. Krüger, E. Uhlmann, A. Verl, O. Rieder, & C. Brecher (Hrsg.), Fortschritt-Berichte VDI. Reihe 2, Fertigungstechnik: Bd. Produktion 2030-Wandel in der Automatisierungstechnik (699; Als Manuskript gedruckt, Nummer 699, S. 151). VDI Verlag.
  20. Heinemann, T., Riedel, O., & Lechler, A. (2019). Generating Smooth Trajectories in Local Path Planning for Automated Guided Vehicles in Production. Procedia Manufacturing, Volume 39, Article Volume 39. https://doi.org/10.1016/j.promfg.2020.01.233
  21. Held, M., Wehner, D., Hämmerl, R., Dangelmaier, M., Briem, A.-K., Reiff, C., & Wulle, F. (2018). Personalization in the Automotive and Building Sector - Research Program of the High-Performance Center „Mass Personalization“ in Stuttgart. MCP-CE. http://www.mcp-ce.org/images/proceedings/2018/28_Held.pdf
  22. Helfesrieder, N., Neubauer, M., Lechler, A., & Verl, A. (2019). Hochautomatisierte Roboterzelle mit adaptiver Werkstückaufspannung für die komplexe Holzbearbeitung. HOB Die Holzbearbeitung, 3/2019, Article 3/2019.
  23. Hinze, C., Tomzik, D., Lechler, A., Xu, X., & Verl, A. (2019). Control Architecture for Industrial Robotics based on Container Virtualization. In T. Schüppstuhl, K. Tracht, & J. Roßmann (Hrsg.), Tagungsband des 4. Kongresses Montage Handhabung Industrieroboter (S. 64--73). Springer Berlin Heidelberg.
  24. Hinze, C., Wnuk, M., Lechler, A., & Verl, A. (2019). Harte Echtzeit für weiche Materialien. atp magazin, 61(11–12), Article 11–12. https://doi.org/10.17560/atp.v61i11-12.2446
  25. Jaensch, F., Csiszar, A., Sarbandi, J., & Verl, A. (2019). Reinforcement Learning of a Robot Cell Control Logic using a Software-in-the-Loop Simulation as Environment. 2019 Second International Conference on Artificial Intelligence for Industries (AI4I), 79–84. https://doi.org/10.1109/AI4I46381.2019.00027
  26. Kaiser, B., & Verl, A. (2019). Interpolation of CNC Toolpaths using Generative Adversarial Networks. 2019 Second International Conference on Artificial Intelligence for Industries (AI4I), 54–57. https://doi.org/10.1109/AI4I46381.2019.00021
  27. Produktion 2030 – Wandel in der Automatisierungstechnik. (2019). In J. Krüger, E. Uhlmann, A. Verl, O. Rieder, & C. Brecher (Hrsg.), Fortschritt-Berichte VDI. Reihe 2, Fertigungstechnik: Bd. Nr. 699 (Als Manuskript gedruckt). VDI Verlag.
  28. König, T., Atmosudiro, A., Verl, A., & Lechler, A. (2019). G2-stetiges Klothoidenüberschleifen. wt Werkstattstechnik online, Jahrgang 109(6), Article 6.
  29. König, T., Verl, A., & Lechler, A. (2019). Motion superimposition for machine tool trajectories using asynchronous axis interpolation. 13th IFAC Workshop on Intelligent Manufacturing Systems IMS 2019, Volume 52(10), Article 10. https://doi.org/10.1016/j.ifacol.2019.10.046
  30. Magnanini, M. C., Eger, F., Reiff, C., Colledani, M., & Verl, A. (2019). A control model for downstream compensation strategy in multi-stage manufacturing systems of complex parts. IFAC-PapersOnLine, Volume 52(Issue 13), Article Issue 13. https://doi.org/10.1016/j.ifacol.2019.11.407
  31. Menze, C., Becker, D., Stehle, T., Möhring, H.-C., Helfesrieder, N., Lechler, A., & Verl, A. (2019). Spanende Bearbeitung mit Industrierobotern und Bearbeitungszentren: Vergleichende Analyse der erzielbaren Bauteilqualität in der Holzbearbeitung. wt Werkstattstechnik online, 109(9), Article 9.
  32. Mesmer, P., Neubauer, M., Lechler, A., & Verl, A. (2019). Spanende Bearbeitung mit Industrierobotern - Herausforderungen bei der Roboterbearbeitung. Robotik und Produktion, 4/2019, 54–55.
  33. Neubauer, M., Mesmer, P., Lechler, A., & Verl, A. (2019). Industrieroboter mit offener Steuerungsplattform. Antriebstechnik, 2019/10, Article 2019/10.
  34. Pott, A., & Tempel, P. (2019). A Unified Approach to Forward Kinematics for Cable-Driven Parallel Robots Based on Energy. In J. Lenarcic & V. Parenti-Castelli (Hrsg.), Advances in Robot Kinematics 2018 (S. 401--409). Springer International Publishing.
  35. Pott, A., Tempel, P., Verl, A., & Wulle, F. (2019). Design, Implementation and Long-Term Running Experiences of the Cable-Driven Parallel Robot CaRo Printer. In A. Pott & T. Bruckmann (Hrsg.), Cable-Driven Parallel Robots (S. 379--390). Springer International Publishing. https://link.springer.com/chapter/10.1007/978-3-030-20751-9_32
  36. Reichenbach, T., Tempel, P., Verl, A., & Pott, A. (2019). On Kinetostatics and Workspace Analysis of Multi-Platform Cable-Driven Parallel Robots with Unlimited Rotation. In C.-H. Kuo (Hrsg.), Proceedings of the 6th IFToMM International Symposium on Robotics and Mechatronics. Springer Switzerland. https://doi.org/10.1007/978-3-030-30036-4
  37. Reichenbach, T., Tempel, P., Verl, A., & Pott, A. (2019). Static Analysis of a Two-Platform Planar Cable-Driven Parallel Robot with Unlimited Rotation. In A. Pott & T. Bruckmann (Hrsg.), Proceedings of the Fourth International Conference on Cable-Driven Parallel Robots. Springer Switzerland. https://doi.org/10.1007/978-3-030-20751-9_11
  38. Reichenbach, T., & Verl, A. (2019). Umdrehungen ohne Ende. Seilroboter mit endloser Rotationsachse. In P. Eberhard (Hrsg.), handling (6; handling, Nummer 6, S. 24).
  39. Reiff, C., Eger, F., Tempel, P., Magnanini, M. C., Ortiz, J. A., Colledani, M., Verl, A., & Sarries, I. (2019). Smart centering for rotation-symmetric parts in multi-stage production systems for zero-defect manufacturing. Procedia CIRP, 79, 27–32. https://doi.org/10.1016/j.procir.2019.02.006
  40. Reiff, C., Eger, F., & Verl, A. (2019). Smart Centering - Methodik zur intelligenten Zentrierung von rotationssymmetrischer Körper für die Null-Fehler-Fertigung in mehrstufigen Produktionssystemen. In J. Krüger, E. Uhlmann, A. Verl, O. Rieder, & C. Brecher (Hrsg.), Fortschritt-Berichte VDI. Reihe 2, Fertigungstechnik: Bd. Produktion 2030-Wandel in der Automatisierungstechnik (699; Als Manuskript gedruckt, Nummer 699, S. 110–132). VDI Verlag.
  41. Reiff, C., Oechsle, S., Eger, F., & Verl, A. (2019). Web-based Platform for Data Analysis and Monitoring. Procedia CIRP, 86, 31–36. https://doi.org/10.1016/j.procir.2020.01.009
  42. Reiff, C., Wulle, F., Strieg, F., & Riedel, O. (2019). Model for the Client-Oriented Selection of Additive Manufacturing Infrastructure based on Information gathered from Production Networks. Procedia CIRP, 84, 322–327. https://doi.org/10.1016/j.procir.2019.04.208
  43. Scheifele, C. (2019). Plattform zur Echtzeit-Co-Simulation für die virtuelle Inbetriebnahme. In Stuttgarter Beiträge zur Produktionsforschung (9595, Fraunhofer Verlag; Nummer 9595). https://doi.org/10.18419/opus-10742
  44. Schenk, C. (2019). Modelling and control of a cable-driven parallel robot : methods for vibration reduction and motion quality improvement [Universität Stuttgart]. https://doi.org/10.18419/opus-10680
  45. Schulte, A., Zahn, P., Lechler, A., & Verl, A. (2019). Extreme Beschleunigung von Vorschubachsen. MM MaschinenMarkt, 24, Article 24. https://www.maschinenmarkt.vogel.de/extremes-beschleunigungsvermoegen-von-vorschubachsen-durch-zusaetzlichen-aktor-a-880746/
  46. Spielmann, T., Ellwein, C., & Riedel, O. (2019). Blended-Learning in der betrieblichen Weiterbildung. atp Magazin, 106–110.
  47. Tempel, P. (2019). Dynamics of cable-driven parallel robots with elastic and flexible, time-varying length cables. In Stuttgarter Beiträge zur Produktionsforschung (9494, Fraunhofer Verlag; Nummer 9494). https://doi.org/10.18419/opus-10818
  48. Tempel, P., Lee, D., Trautwein, F., & Pott, A. (2019). Modeling of Elastic-Flexible Cables with Time-Varying Length for Cable-Driven Parallel Robots. In A. Pott & T. Bruckmann (Hrsg.), Proceedings of the Fourth International Conference on Cable-Driven Parallel Robots. Springer Switzerland.
  49. Tempel, P., Trautwein, F., & Pott, A. (2019). Experimental Identification of Stress-Strain Material Models of UHMWPE Fiber Cables for Improving Cable Tension Control Strategies. In J. Lenarcic & V. Parenti-Castelli (Hrsg.), Advances in Robot Kinematics 2018 (S. 258--265). Springer International Publishing.
  50. Verl, A., & Kienzlen, A. (2019). Der Materialfluss des digitalen Zwillings. SPS Magazin, 10, Article 10.
  51. von Arnim, C., Friedl, S., Lechler, A., & Verl, A. (2019). Automated OPC UA address space generation from existing data structures. 2019 IEEE 17th International Conference on Industrial Informatics (INDIN), 1, 959–964. https://doi.org/10.1109/INDIN41052.2019.8972189
  52. Wnuk, M., Wenger, T., Lechler, A., & Verl, A. (2019). Nachgiebigkeit ist Einstellungssache. handling, 9, Article 9.
  53. Wolf, M., & Elser, A. (2019). A software architecture for a multi-axis additive manufacturing path-planning tool. Procedia CIRP.
  54. Wulle, F., Bubeck, W., Elser, A., Wolf, M., & Verl, A. (2019). Trajektorienplanung mittels modellprädiktiver Vorsteuerung eines FDM-Druckkopfes. 26. Stuttgarter Kunststoffkolloquium, 83–88.
  55. Wulle, F., Wolf, M., Riedel, O., & Verl, A. (2019). Method for load-capable path planning in multi-axis fused deposition modeling. Procedia CIRP, 84, 335--340. https://doi.org/10.1016/j.procir.2019.04.188

2018

  1. Adamietz, R. (2018). A method for the assembly of microelectronic packages using microwave curing. In Stuttgarter Beiträge zur Produktionsforschung (8080, Fraunhofer Verlag; Nummer 8080). https://doi.org/10.18419/opus-9820
  2. Brecher, C., V. A. L. A. S. M. (2010). Open control systems: State of the Art: Open control systems: State of the Art (S. ).
  3. Dripke, C., Laicher, S., & Verl, A. (2018). Axis-in-the-loop simulation: a concept to transfer verfication and validation of distributed interpolation algorithms from simulation to interaction with commercial motion control hardware. Proceedings of International Conference on Computers & Industrial Engineering (CIE 48).
  4. Dripke, C., Schneider, B., Dragan, M., Zoitl, A., & Verl, A. (2018). Concept of Distributed Interpolation for Skill-Based Manufacturing with Real-Time Communication. In T. Schüppstuhl, K. Tracht, & J. Franke (Hrsg.), Tagungsband des 3. Kongresses Montage Handhabung Industrieroboter. Springer Vieweg. https://doi.org/10.1007/978-3-662-56714-2
  5. Eger, F., Coupek, D., Caputo, D., Colledani, M., Penalva, M., Ortiz, J. A., Freiberger, H., & Kollegger, G. (2018). Zero Defect Manufacturing Strategies for Reduction of Scrap and Inspection Effort in Multi-stage Production Systems. Procedia CIRP, 67, 368--373. https://doi.org/10.1016/j.procir.2017.12.228
  6. Eger, F., Reiff, C., Brantl, B., Colledani, M., & Verl, A. (2018). Correlation analysis methods in multi-stage production systems for reaching zero-defect manufacturing. Procedia CIRP, 72, 635--640. https://doi.org/10.1016/j.procir.2018.03.163
  7. Eger, F., Reiff, C., Colledani, M., & Verl, A. (2018). Knowledge Capturing Platform in Multi-Stage Production Systems for Zero-Defect Manufacturing. 2018 25th International Conference on Mechatronics and Machine Vision in Practice (M2VIP), 1–6. https://doi.org/10.1109/M2VIP.2018.8600910
  8. Ellwein, C. (2018). Vermittlungs- und Beauftragungsplattformen im Überblick. Digital Factory Journal, 2/2018, 46–48. https://digital-factory-journal.de/crossmediales-konzept/heft-archiv.html
  9. Ellwein, C., Elser, A., & Riedel, O. (2018). Production Planning and Control Systems-Breakage in Connectivity. Make them fit to fit altering conditions. Proceedings of the 2018 International Conference on Computers in Management and Business, 1(1), Article 1. https://doi.org/10.1145/3232174.3232176
  10. Ellwein, C., Riedel, O., Meyer, O., & Schel, D. (2018). Rent’n’Produce: A secure cloud manufacturing platform for small and medium enterprises. Conference Proceedings ICE/IEEE ITMC 2018, 882–887.
  11. Ellwein, C., Schmidt, A., Riedel, O., & Lechler, A. (2018). Shareconomy in der Fertigungsindustrie. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 113(11), Article 11. https://doi.org/10.3139/104.112010
  12. Elser, A., Königs, M., Verl, A., & Servos, M. (2018). On achieving accuracy and efficiency in Additive Manufacturing: Requirements on a hybrid CAM system. Procedia CIRP, 72(2018), Article 2018.
  13. Engelberth, T., Krawczyk, D., & Verl, A. (2018). Model-based method for condition monitoring and diagnosis of compressors. Procedia CIRP, 72, 1321--1326. https://doi.org/10.1016/j.procir.2018.03.271
  14. Engelberth, T., Verl, A., & Heckmann, M. (2018). Potenziale von Zahnstange-Ritzel-Antriebssystemen. Antriebstechnik, 3, Article 3. https://digital.antriebstechnik.de/antriebstechnik-3-2018/59892441/52
  15. Felbrich, B., Wulle, F., Allgaier, C., Menges, A., Verl, A., Wurst, K.-H., & Nebelsick, J. H. (2018). A novel rapid additive manufacturing concept for architectural composite shell construction inspired by the shell formation in land snails. Bioinspiration & Biomimetics, 13(2), Article 2. https://doi.org/10.1088/1748-3190/aaa50d
  16. Fur, S., Verl, A., & Pott, A. (2018). Simulation of Industrial Bin Picking: An Application of Laser Range Finder Simulation. In IEEE (Hrsg.), 2018 IEEE International Conference on Computational Intelligence and Virtual Environments for Measurement Systems and Applications (CIVEMSA). https://doi.org/10.1109/CIVEMSA.2018.8439959
  17. Held, M., Wehner, D., Hämmerl, R., Dangelmaier, M., Briem, A.-K., Reiff, C., & Wulle, F. (2018). Personalization in the Automotive and Building Sector - Research Program of the High-Performance Center „Mass Personalization“ in Stuttgart. MCP-CE. http://www.mcp-ce.org/images/proceedings/2018/28_Held.pdf
  18. Helfesrieder, N., Lechler, A., & Verl, A. (2018). Mehr Steifigkeit bei weniger Gewicht. MM Maschinenmarkt, 019, Article 019.
  19. Henke, T., Zahn, P., Frick, F., & Lechler, A. (2018). TSN and OPC UA for Industrial Automation (M. Sturm, Hrsg.). WEKA FACHMEDIEN GmbH.
  20. Hinze, C., Tasci, T., Lechler, A., & Verl, A. (2018). Towards Real-Time Capable Simulations with a Containerized Simulation Environment. 2018 25th International Conference on Mechatronics and Machine Vision in Practice (M2VIP), 1–6. https://doi.org/10.1109/M2VIP.2018.8600827
  21. Jaensch, F., Csiszar, A., Kienzlen, A., & Verl, A. (2018). Reinforcement Learning of Material Flow Control Logic Using Hardware-in-the-Loop Simulation. 2018 First International Conference on Artificial Intelligence for Industries (AI4I), 77–80. https://doi.org/10.1109/AI4I.2018.8665712
  22. Jaensch, F., Csiszar, A., Scheifele, C., & Verl, A. (2018). Digital Twins of Manufacturing Systems as a Base for Machine Learning. 2018 25th International Conference on Mechatronics and Machine Vision in Practice (M2VIP), 1–6. https://doi.org/10.1109/M2VIP.2018.8600844
  23. Kaiser, B., Csiszar, A., & Verl, A. (2018). Generative models for direct generation of CNC toolpaths. In A. Verl, P. Xu, & A. Csiszar (Hrsg.), The proceedings of the 2018 25th International Conference on Mechatronics and Machine Vision in Practice (M2VIP) (S. 13–18). IEEE. https://doi.org/10.1109/M2VIP.2018.8600856
  24. Karim, A., Schmid, S., & Verl, A. (2018). POSE AND FEED-DIRECTION DEPENDENCY ANALYSIS FOR MILLING TASKS WITH INDUSTRIAL ROBOTS. DEStech Transactions on Engineering and Technology Research, ICPR. https://doi.org/10.12783/dtetr/icpr2017/17670
  25. Klein, M., Hoher, S., Kimpeler, S., Lehner, M., Jaensch, F., Kühfuß, F., Lehmann, H., & Snelting, F. (2018). Machines Without Humans—Post-Robotics. In M. Coeckelbergh, J. Loh, & M. Funk (Hrsg.), Proceedings of Robophilosophy 2018 / TRANSOR 2018 (S. 88–92). https://doi.org/10.3233/978-1-61499-931-7-88
  26. Kretschmer, F., von Arnim, C., Lechler, A., & Verl, A. (2018). Persistent data backend for OPC UA namespaces in IT infrastructures. Procedia CIRP, 72, 174–178. https://doi.org/10.1016/j.procir.2018.03.233
  27. Kübler, K., Scheifele, S., Scheifele, C., & Riedel, O. (2018). Model-Based Systems Engineering for Machine Tools and Production Systems (Model-Based Production Engineering). Procedia Manufacturing, 24, 216--221. https://doi.org/10.1016/j.promfg.2018.06.036
  28. Mesmer, P., Lechler, A., & Verl, A. (2018). Antriebsbasierte Schwingungsdämpfung an Industrierobotern für die spanende Bearbeitung. Antriebstechnik, 10/2018, 96–97.
  29. Oberer-Treitz, S. (2018). Abschätzung der Kollisionsfolgen von Robotern zur Bewertung des sicheren Einsatzes in der Mensch-Roboter-Kooperation. In Stuttgarter Beiträge zur Produktionsforschung (7777, Fraunhofer Verlag; Nummer 7777). https://doi.org/10.18419/opus-9698
  30. Pott, A. (2018). Cable-driven parallel robots : theory and application. In Springer tracts in advanced robotics (120120, Springer; Nummer 120120). https://doi.org/10.1007/978-3-319-76138-1
  31. Pott, A., & Tempel, P. (2018). A Unified Approach to Kinematics for Cable-driven Parallel Robots based on Energy. Advances in Robot Kinematics 2018, 8, 401--409. https://doi.org/10.1007/978-3-319-93188-3_46
  32. Reiff, C., Eger, F., Korb, T., Freiberger, H., & Verl, A. (2018). User Interface for the Acquisition and Characterization of Defects and Performed Rework in Multi-Stage Production Systems. Procedia CIRP, 78, 243–248. https://doi.org/10.1016/j.procir.2018.09.066
  33. Reiff, C., Wulle, F., Riedel, O., Epple, S., & Onuseit, V. (2018). On Inline Process Control for Selective Laser Sintering. MCP-CE. http://www.mcp-ce.org/images/proceedings/2018/34_Reiff.pdf
  34. Reis, C. (2018). Magneto-hydrodynamische Fokussierung : ein neues Verfahren für die Point of Care Diagnostik. In Stuttgarter Beiträge zur Produktionsforschung (7979, Fraunhofer Verlag; Nummer 7979). https://doi.org/10.18419/opus-9766
  35. Scheifele, S., & Riedel, O. (2018). Vom mechatronischen zum Digital Engineering von Maschinen und Anlagen. atp Plus.
  36. Scheifele, S., Verl, A., & Riedel, O. (2018). Engineering mit cyber-physischen Systemen - Vom mechatronischen zum cyber-physischen Engineering. atp magazin, 11/12 2018, Article 11/12 2018.
  37. Schmidt, A., Martin, C., Dietz, T., & Pott, A. (2018). A generic data structure for the specific domain of robotic arc welding. In P. CIRP (Hrsg.), 51st CIRP Conference on Manufacturing Systems: Bd. Procedia CIRP (72; Nummer 72, S. 322–327). Elsevier. https://doi.org/10.1016/j.procir.2018.03.268
  38. Schröter, D. (2018). Entwicklung einer Methodik zur Planung von Arbeitssystemen in Mensch-Roboter-Kooperation. In Stuttgarter Beiträge zur Produktionsforschung (8181, Fraunhofer Verlag; Nummer 8181). https://doi.org/10.18419/opus-9949
  39. Sommer, P., Schellroth, F., Fischer, M., & Schlechtendahl, J. (2018). Message-oriented Middleware for Industrial Production Systems. 2018 IEEE 14th International Conference on Automation Science and Engineering (CASE), 1217–1223. https://doi.org/10.1109/COASE.2018.8560493
  40. Sommer, P., Verl, A., Kiefer, M., Rahäuser, R., Müller, S., Brühl, J., Gras, M., Berckmann, E., Stautner, M., Schäfer, D., Schotte, W., Do-Khac, D., Neyrinck, A., & Eger, U. (2018). iWindow - Intelligentes Maschinenfenster. In P. Sommer (Hrsg.), Fortschritt-Berichte VDI: Reihe 2 (697; Nummer 697). VDI Verlag. http://dx.doi.org/10.18419/opus-9818
  41. Strljic, M. M., Brovkina, D., Korb, T., Riedel, O., & Lechler, A. (2018). Platform architecture concept for the composition of collective cloud manufacturing. 2018 25th International Conference on Mechatronics and Machine Vision in Practice (M2VIP), 1--6.
  42. Strljic, M. M., Korb, T., Tasci, T., Tinsel, E.-F., Pawlowicz, D., Riedel, O., & Lechler, A. (2018). A platform-independent communication framework for the simplified development of shop-floor applications as microservice components. 2018 IEEE International Conference on Advanced Manufacturing (ICAM), 250–253. https://doi.org/10.1109/AMCON.2018.8615044
  43. Strljic, M. M., Tasci, T., Schmidt, A., Korb, T., & Riedel, O. (2018). A data model for data gathering from heterogeneous IoT and Industry 4.0 applications. In M. Bargende, H.-C. Reuss, & J. Wiedemann (Hrsg.), 18. Internationales Stuttgarter Symposium (S. 843--857). Springer Fachmedien Wiesbaden.
  44. Sun, Z. (2018). Erhöhung der Bandbreite von Vorschubantrieben mit Kugelrollspindeln unter Verwendung der Lagegeschwindigkeit. In Stuttgarter Beiträge zur Produktionsforschung (7474, Fraunhofer Verlag; Nummer 7474). https://doi.org/10.18419/opus-9688
  45. Tasci, T., Schmidt, A., Strljic, M. M., & Verl, A. (2018). A container-based architecture for the flexible coupling of communication protocols. 18. Internationales Stuttgarter Symposium, 827--841.
  46. Tempel, P., Schmidt, A., Haasdonk, B., & Pott, A. (2018). Application of the Rigid Finite Element Method to the Simulation of Cable-Driven Parallel Robots. In S. Zeghloul, L. Romdhane, & M. A. Laribi (Hrsg.), Computational Kinematics: Proceedings of the 7th International Workshop on Computational Kinematics that was held at Futuroscope-Poitiers, France, in May 2017: Bd. Mechanisms and Machine Science (50; Nummer 50, S. 198--205). Springer International Publishing. https://doi.org/10.1007/978-3-319-60867-9_23
  47. Trautwein, F., Tempel, P., & Pott, A. (2018). A Symbolic-Numeric Method to Capture the Impact of Varied Geometrical Parameters on the Translational Workspace of a Planar Cable-Driven Parallel Robot. 2018 International Conference on Reconfigurable Mechanisms and Robots (ReMAR), 1–7. https://doi.org/10.1109/REMAR.2018.8449891
  48. Verl, A., & Engelberth, T. (2018). Adaptive preloading for rack-and-pinion drive systems. CIRP Annals, 67(1), Article 1. https://doi.org/10.1016/j.cirp.2018.03.006
  49. Verl, A., & Scheifele, S. (2018). Produktions-IT für Losgröße 1. 20. Dresdner Werkzeugmaschinen-Fachseminar, Dresden. /brokenurl#www.wzm-fachseminar.de
  50. Wesseler, P., Kaiser, B., te Vrugt, J., Lechler, A., & Verl, A. (2018). Camera Based Path Planning for Low Quantity : High Variant Manufacturing with Industrial Robots. In A. Verl, P. Xu, & A. Csiszar (Hrsg.), 2018 25th International Conference on Mechatronics and Machine Vision in Practice (M2VIP) (S. 260–265). IEEE. https://doi.org/10.1109/M2VIP.2018.8600833
  51. Wnuk, M., Lechler, A., & Verl, A. (2018). Der Umgang mit Weichheit. handling, 10, Article 10.
  52. Wnuk, M., Lechler, A., & Verl, A. (2018). Formschlüssiges Spannen leicht gemacht. KEM Konstruktion, 12, Article 12.
  53. Zahn, P. (2018). Antriebskonzept für unstetige Vorschubbewegungen mit trägheitsbasiertem Impulsaktor. Antriebstechnik, 2018(9), Article 9. https://digital.antriebstechnik.de/antriebstechnik-9-2018/62060510/95
  54. Zahn, P., Lechler, A., & Verl, A. (2018). Vorrichtung und Verfahren zur Erzeugung einer Relativbewegung zwischen einem Werkzeug und einem Werkstück (mittels trägheitsbasiertem Impulsaktor) (Patent PCT/EP2018/062608).
  55. Zahn, P., Lechler, A., & Verl, A. (2018). Vorschubantrieb für unstetige Bewegungsprofile - Konzept zur Bewegungserzeugung an Vorschubachsen mittels eines trägheitsbasierten Impulsaktors. wt Werkstattstechnik online, 108(5), Article 5. https://www.werkstattstechnik.de/wt/currentarticle.php?dataarticle_id=89617

2017

  1. Abel, M. (2017). Automatisierte Inbetriebnahme von rekonfigurierbaren Bearbeitungsmaschinen mit serviceorientierten Paradigmen. In Stuttgarter Beiträge zur Produktionsforschung (6161, Fraunhofer Verlag; Nummer 6161). https://doi.org/10.18419/opus-9048
  2. Apprich, S. (2017). Digitaler Zwilling einer Maschinenstruktur. MaschinenMarkt, B04654, Article B04654. http://www.maschinenmarkt.vogel.de/effiziente-erzeugung-digitaler-zwillinge-von-leichtbau-werkzeugmaschinenstrukturen-a-577890/
  3. Apprich, S., Wulle, F., Pott, A., & Verl, A. (2017). Exakte posenabhängige Strukturmodelle - Online-Identifikation des generellen Strukturmodells einer Leichtbauwerkzeugmaschinenkinematik. wt Werstattstechnik online, 107 (2017)(5), Article 5.
  4. Boanta, C., & Csiszar, A. (2017). Optimal design of a parallel structure used as a haptic Interface. Mechanism and Machine Theory, 116, 69–88. https://doi.org/10.1016/j.mechmachtheory.2017.05.013
  5. Coupek, D., Lechler, A., & Verl, A. (2017). Cloud-based control strategy: downstream defect reduction in the production of electric motors. IEEE Transactions on Industry Applications, 1--1. https://doi.org/10.1109/tia.2017.2732340
  6. Csiszar, A., Eilers, J., & Verl, A. (2017). On solving the inverse kinematics problem using neural networks. 2017 24th International Conference on Mechatronics and Machine Vision in Practice (M2VIP), 1–6. https://doi.org/10.1109/M2VIP.2017.8211457
  7. Csiszar, A. (2017). Online path planing for industrial robots with integrated workspace limits and safety criterion [Universität Stuttgart]. https://doi.org/10.18419/opus-9367
  8. Csiszar, A., Hoppe, M., Khader, S. A., & Verl, A. (2017). Behavior Trees for Task-Level Programming of Industrial Robots. In T. Schüppstuhl, J. Franke, & K. Tracht (Hrsg.), Tagungsband des 2. Kongresses Montage Handhabung Industrieroboter (S. 175--186). Springer Berlin Heidelberg.
  9. Csiszar, A., Jaensch, F., Kienzlen, A., & Scheifele, C. (2017). Machine Learning in Steuerungstechnik und Robotik. SPS MAGAZIN, 30(12 2017), Article 12 2017.
  10. Dripke, C., Höhr, S., Csiszar, A., & Verl, A. (2017). A Concept for the Application of Reinforcement Learning in the Optimization of CAM-Generated Tool Paths. In J. Beyerer, O. Niggemann, & C. Kühnert (Hrsg.), Machine Learning for Cyber Physical Systems (S. 1--8). Springer Berlin Heidelberg.
  11. Dripke, C., & Verl, A. (2017). Challenges in distributed interpolation with multi-component systems in future-oriented manufacturing units. Proceedings of International Conference on Computers & Industrial Engineering (CIE 47).
  12. Eberspächer, P. (2017). Zustandsmodellbasierte, steuerungsnahe Energieverbrauchsoptimierung von Werkzeugmaschinen. In Stuttgarter Beiträge zur Produktionsforschung (6262, Fraunhofer Verlag; Nummer 6262). https://doi.org/10.18419/opus-9064
  13. Eger, F., & Verl, A. (2017). Reduzierung von Ausschuss und Nacharbeiten durch intelligente Datenauswertung und Kompensationsalgorithmen in mehrstufigen Produktionssystemen. Fortschritt-Berichte VDI, Nr. 698, 57–66.
  14. Ellwein, C., Lechler, A., & Riedel, O. (2017). Cloud-Service zur Beauftragung und Steuerung von Fertigungssystemen: Vorbehalte und Erwartungen der Industrie: Konferenzbeitrag. Digital Transformation Convention, 1, Article 1.
  15. Ellwein, C., & Riedel, O. (2017). Rent’n’Produce: A Social Media Platform for Cloud Manufacturing. In G. Lee (Hrsg.), Smart Materials and Nanotechnology in Engineering: Bd. Lecture Notes in Earth Sciences (S. 75--81). IERI & PRESS. https://doi.org/10.5729/lnes.2017.7.75
  16. Engel, T. (2017). Reibadaptive Gleitführungen für Vorschubantriebssysteme. In Stuttgarter Beiträge zur Produktionsforschung (6363, Fraunhofer Verlag; Nummer 6363). https://doi.org/10.18419/opus-9158
  17. Frick, F., Zahn, P., & Lechler, A. (2017). Ethernet TSN statt Feldbus? computer-automation, 9.5.2017. https://www.computer-automation.de/feldebene/antriebe/artikel/141490/3/
  18. Friedrich, C., Csiszar, A., Lechler, A., & Verl, A. (2017). Efficient Task and Path Planning for Maintenance Automation Using a Robot System. IEEE Transactions on Automation Science and Engineering, PP(99), Article 99. https://doi.org/10.1109/TASE.2017.2759814
  19. Friedrich, C., Csiszar, A., Lechler, A., & Verl, A. (2017). Efficient task and path planning for maintenance automation using a robot system (accepted 01.10.2017). IEEE Transactions on Automation Science and Engineering. https://doi.org/10.1109/TASE.2017.2759814
  20. Friedrich, C., Csiszar, A., Lechler, A., & Verl, A. (2017, Juli). Fast robot task and path planning based on CAD and vision data. 2017 IEEE International Conference on Advanced Intelligent Mechatronics (AIM). https://doi.org/10.1109/aim.2017.8014252
  21. Friedrich, C., Lechler, A., & Verl, A. (2017). Instandhaltung mit Robotersystemen. handling, 11/2017, Article 11/2017.
  22. Friedrich, C., von Arnim, C., Lechler, A., & Verl, A. (2017, Juli). Visual perception for robot based maintenance automation. 2017 IEEE International Conference on Advanced Intelligent Mechatronics (AIM). https://doi.org/10.1109/aim.2017.8014048
  23. Friedrich, C., Zielke, V., Toussaint, M., Lechler, A., & Verl, A. (2017). Environment Modeling for Maintenance Automation- A Next-Best-View Approach for combining Space Exploration and Object Recognition Tasks. IEEE International Conference on Automation Science and Engineering (CASE), 1445–1450.
  24. Friedrich, J., Maurer, A., Lechler, A., & Verl, A. (2017). Estmation of the Pose-Dependent Stability Lobe Diagram for a new 5-axis Machining Concept. International Journal of Engineering - ANNALS of Faculty Engineering Hunedoar, 15(2), Article 2. http://annals.fih.upt.ro/pdf-full/2017/ANNALS-2017-2-14.pdf
  25. Friedrich, J., Torzewski, J., & Verl, A. (2017). Online Learning of Stability Lobe Diagrams in Milling. Procedia Technology.
  26. Fur, S., Scheifele, C., Pott, A., & Verl, A. (2017). HiL-Simulator für den industriellen „Griff in die Kiste“. wt Werkstattstechnik online, 107(10), Article 10. http://www.werkstattstechnik.de/wt/get_article.php?dataarticle_id=88481
  27. Gerlach, O., Csiszar, A., Lechler, A., & Verl, A. (2017). Funktionale Programmiersprachen zur Entwicklung numerischer Steuerungen: Analyse von Potential und Einsatzmöglichkeiten. wt Werkstattstechnik online, 107(5), Article 5. http://www.werkstattstechnik.de/wt/currentarticle.php?dataarticle_id=87727
  28. Giesen, T. (2017). Verfahren zur automatisierten Handhabung von hochsensiblen Photovoltaik-Substraten aus Flüssigkeiten. In Stuttgarter Beiträge zur Produktionsforschung (7070, Fraunhofer Verlag; Nummer 7070). https://doi.org/10.18419/opus-9278
  29. Held, M., Wehner, D., Hämmerl, R., Dangelmaier, M., Briem, A.-K., Reiff, C., & Wulle, F. (2018). Personalization in the Automotive and Building Sector - Research Program of the High-Performance Center „Mass Personalization“ in Stuttgart. MCP-CE. http://www.mcp-ce.org/images/proceedings/2018/28_Held.pdf
  30. Hinze, C., Xu, W., Lechler, A., & Verl, A. (2017). A cloud-based control architecture design for the interaction of industrial robots with soft objects. 2017 24th International Conference on Mechatronics and Machine Vision in Practice (M2VIP), 1–6. https://doi.org/10.1109/M2VIP.2017.8211438
  31. Hoher, S. (2017). Ein gekoppeltes Materialflussmodell zur durchgängigen Entwicklungsunterstützung von Materialflusssteuerungen. In Stuttgarter Beiträge zur Produktionsforschung (6767, Fraunhofer Verlag; Nummer 6767). https://doi.org/10.18419/opus-9309
  32. Jaensch, F., Neyrinck, A., Lechler, A., & Verl, A. (2017). Variantenreiche Fabrikplanung: Automatische Variantenerzeugung für den simulationsbasierten Vergleich von Anlagenprojektierungen. wt Werkstattstechnik online, 107(9), Article 9.
  33. Karim, A., Hitzer, J., Lechler, A., & Verl, A. (2017). Analysis of the dynamic behavior of a six-axis-industrial robot across the entire workspace in respect of machining tasks. IEEE International Conference on Advanced Intelligent Mechatronics (AIM), 2017, 670--675. https://doi.org/10.1109/AIM.2017.8014094
  34. Karim, A., Lechler, A., & Verl, A. (2017). Kompensation des Umkehrspiels bei Zahnstange-Ritzel-Antrieben. Antriebstechnik, 4, Article 4. http://digital.antriebstechnik.de/antriebstechnik-4-2017/58127174/116
  35. Korb, T., & Sommer, P. (2017). Digitale Produktion - Der geschlossene Informationskreislauf. Automation im Focus, 4, Article 4.
  36. Kübler, K., Oberle, M., Verl, A., & Riedel, O. (2017). Simulation-assisted run-to-run control for battery manufacturing in a cloud environment. 2017 24th International Conference on Mechatronics and Machine Vision in Practice (M2VIP), 1–6. https://doi.org/10.1109/M2VIP.2017.8211450
  37. Laptev, I. (2017). Direkte Sliding-Mode-Stromregelung von Vorschubantrieben. In Stuttgarter Beiträge zur Produktionsforschung (7171, Fraunhofer Verlag; Nummer 7171). https://doi.org/10.18419/opus-9597
  38. Neher, P., Lechler, A., & Verl, A. (2017). Applications enabled by a deterministic wireless communication system such as Industrial LTE. Proceedings of 2017 the 7th International Workshop on Computer Science and Engineering (WCSE 2017).
  39. Neubauer, M., Lechler, A., & Verl, A. (2017). Die Maschinendynamik im Visier. der Konstrukteur, 9, Article 9.
  40. Neubauer, M., Zahn, P., Lechler, A., & Verl, A. (2017). Simulation des dynamischen Verhaltens von Kugelgewindetrieben. Antriebstechnik, 11, Article 11.
  41. Oberhofer, F., Janny, B., Maier, T., Wulle, F., & Verl, A. (2017). Chancen und Grenzen der Additiven Fertigung bei der Gestaltung physischer Mensch-Maschine-Schnittstellen. Soziotechnische Gestaltung des digitalen Wandels - kreativ, innovativ, sinnhaft - Frühjahrskongress der Gesellschaft für Arbeitswissenschaft e.V., 63.
  42. Reuß, M. (2017). Modeling method for simulation of assembly variances. In Stuttgarter Beiträge zur Produktionsforschung (7272, Fraunhofer Verlag; Nummer 7272). https://doi.org/10.18419/opus-9477
  43. Scheifele, C. (2017). Virtuelle Methoden in der Produktionstechnik. KoMSO Modellierungstag „Computational Manufacturing: Simulation in Produktionsprozessen“.
  44. Scheifele, C., & Riedel, O. (2017). Virtual assessment of production and its manufacturing units. 10th Graz Symposium Virtual Vehicle GSVF2017.
  45. Scheifele, C., Riedel, O., & Verl, A. (2017). Virtuelle Inbetriebnahme komplexer Produktionsanlagen mittels echtzeitfähiger Co-Simulation. 18. Leitkongress der Mess- und Automatisierungstechnik AUTOMATION 2017, VDI-Berichte 2293.
  46. Scheifele, C., & Verl, A. (2017). Von der Virtuellen Maschine zur Virtuellen Produktion mit Ansätzen der Echtzeit-Co-Simulation: Bd. Industrie 4.0 : Vision und Realität (696; Nummer 696). Fortschrittberichte VDI. Reihe 2, Fertigungstechnik. http://www.worldcat.org/search?qt=worldcat_org_all&q=9783183696024
  47. Scheifele, S., & Riedel, O. (2017). Vom mechatronischen zum Digital Engineering von Maschinen und Anlagen. atp plus, 4, Article 4. https://www.atpinfo.de/zeitschriften/atp-plus/
  48. Scheifele, S., Riedel, O., & Pritschow, G. (2017). Engineering of machine tools and manufacturing systems using cyber-physical systems: Bd. 2017 Winter Simulation Conference (WSC) (S. 1503–1514). IEEE. https://doi.org/10.1109/WSC.2017.8247892
  49. Scheifele, S., Verl, A., & Riedel, O. (2017). Automatische HILS-generierung für komplexe Maschinen. Springer Konstruktion, 06–2017(06), Article 06. http://www.ingenieur.de/Konstruktion/2017/Ausgabe-06/Praxis-Forschung-Wissenschaft/Automatische-HILS-Generierung-fuer-komplexe-Maschinen
  50. Schmidt, V. L. (2017). Modeling techniques and reliable real-time implementation of kinematics for cable-driven parallel robots using polymer fiber cables. In Stuttgarter Beiträge zur Produktionsforschung (6565, Fraunhofer Verlag; Nummer 6565). https://doi.org/10.18419/opus-9085
  51. Schneider, U. J. (2017). Untersuchung von modellbasierter Fehlerkompensation und erweiterter Positionsregelung zur Genauigkeitssteigerung von roboterbasierten Zerspanungsprozessen. In Stuttgarter Beiträge zur Produktionsforschung (6060, Fraunhofer Verlag; Nummer 6060). https://doi.org/10.18419/opus-9055
  52. Schächtele, J. (2017). Ein drahtloses Verfahren zur Messung der Pulswellengeschwindigkeit in einem Stent mittels passiver Sensorik. In Stuttgarter Beiträge zur Produktionsforschung (6464, Fraunhofer Verlag; Nummer 6464). https://doi.org/10.18419/opus-9063
  53. Simon, A. (2017). Adaptierbarer Antriebsregler : ein Beitrag zur Architekturgestaltung eines neuartigen Antriebsreglers. In Stuttgarter Beiträge zur Produktionsforschung (6666, Fraunhofer Verlag; Nummer 6666). https://doi.org/10.18419/opus-9157
  54. Tasci, T., Ellwein, C., Strljic, M. M., & Riedel, O. (2017). Microservice-oriented master control for AGV in the automotive factory of the future. 17. Internationales Stuttgarter Symposium, 807--821.
  55. Tempel, P., Herve, P.-E., Tempier, O., Gouttefarde, M., & Pott, A. (2017, Mai). Estimating inertial parameters of suspended cable-driven parallel robots — Use case on CoGiRo. 2017 IEEE International Conference on Robotics and Automation (ICRA). 2017 IEEE International Conference on Robotics and Automation (ICRA), Singapore, Singapore. https://doi.org/10.1109/icra.2017.7989723
  56. Tempel, P., & Pott, A. (2017). Expo 2015 - A SimTech Success Story.
  57. Uphoff, J., Lechler, A., & Verl, A. (2017). Werkstückerwärmung für das Thixoforming: Induktor als Sensor zum Überwachen der Erwärmung bis in den teilflüssigen Bereich. wt Werkstattstechnik online, 107(5), Article 5. http://www.werkstattstechnik.de/wt/currentarticle.php?dataarticle_id=87724
  58. Vieler, H., Lechler, A., & Riedel, O. (2017). Architecture and Implementation of an Interface for Intelligent Tools in Machine Tools. 27th International Conference on Flexible Automation and Intelligent Manufacturing.
  59. Wnuk, M., Pott, A., Xu, W., Lechler, A., & Verl, A. (2017). Concept for a simulation-based approach towards automated handling of deformable objects - A bin picking scenario. 24th International Conference on Mechatronics and Machine Vision in Practice (M2VIP), 1–6. https://doi.org/10.1109/M2VIP.2017.8211452
  60. Wulle, F., Coupek, D., Schäffner, F., Verl, A., Oberhofer, F., & Maier, T. (2017). Workpiece and Machine Design in Additive Manufacturing for Multi-Axis Fused Deposition Modeling. Procedia CIRP, 60, 229--234. https://doi.org/10.1016/j.procir.2017.01.046
  61. Wulle, F., Kovaleva, D., Christof, H., Wurst, K.-H., Lechler, A., Verl, A., Sobek, W., Haase, W., & Gresser, G. (2017). Die Natur als Ideengeber für moderne Fertigungstechniken. In N. Stuttgart (Hrsg.), Baubionik - Biologie beflügel Architektur: Bd. Serie C (82; Nummer 82).
  62. Zahn, P. (2017). TSN - Potentials and Challenges for the Use in Industrial Automation. Vortrag TSN/A-Conference. TSN/A Conference 2017, Stuttgart.
  63. Zahn, P. (2017). TSN - Nachfolger des Feldbusses oder nur ein weiterer Standard? Vortrag beim VDMA-Informationstag. VDMA-Informationstag: Kommunikation in Echtzeit - Chance und Risiko für den Maschinenbau, Frankfurt/Main.
  64. Zahn, P., Neubauer, M., & Lechler, A. (2017). Different Approaches to Improve the Dynamic Behavior of Machine Tool Feed Drives. Acta Technica Corvininesis - Bulletin of Engineering, 10(2), Article 2.
  65. Zahn, P., & Weber, K. (2017). Interview zu Time-Sensitive Networking in der Automatisierung. SPS-Magazin, 11/2017. http://sps-magazin.de/?inc=artikel/article_show&nr=135113

2016

  1. "Scheifele, S., & "Lechler, A. (2016). Verkürzte Umrüstzeit modularer Produktionsanlagen durch automatisierte Anpassung der Steuerung. In G. " "Frey (Hrsg.), Fortschritte in der Antriebs- und Automatisierungstechnik (FAA) (ISBN 978-3-8396-1006-0; Nummer ISBN 978-3-8396-1006-0, S. 88–97). Fraunhofer Verlag.
  2. "Scheifele, S., "Lechler, A., & "Verl, A. (2016). Steuerungstechnisches Engineering von Maschinen und Anlagen im Kontext Industrie 4.0. Fortschritt-Berichte VDI, Reihe 2 (Fertigungstechnik)(696), Article 696.
  3. Apprich, S., Wulle, F., Pott, A., & Verl, A. (2016, Juli). Online parameter identification for a linear parameter-varying model of large-scale lightweight machine tool structures with pose-dependent dynamic behavior. 2016 IEEE International Conference on Advanced Intelligent Mechatronics (AIM). https://doi.org/10.1109/aim.2016.7576992
  4. Atmosudiro, A., Verl, A., Lechler, A., & Morán, X. (2016). An Interpolation Concept for Linear Blending Based on Cornu Spiral. Procedia CIRP, 46, 348--351.
  5. Atmosudiro, A., Verl, A., Lechler, A., & Schwarz, G. (2016). Evaluation of clothoids in manufacturing context.
  6. Bosch, T. (2016). Methode zur Reduktion technischer Nebenzeiten in der spanenden Fertigung. In Stuttgarter Beiträge zur Produktionsforschung (5656, Fraunhofer Verlag; Nummer 5656). https://doi.org/10.18419/opus-8925
  7. Braband, M., Frick, F., Lechler, A., & Verl, A. (2016). Process requirements-based adaptive PWM for improved efficiency of machine tool feed drives. Proceedings of the International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, 256–263.
  8. Bubeck, A. (2016). Modellbasierte Softwareentwicklung für mobile Manipulatoren im industriellen Einsatz. In Stuttgarter Beiträge zur Produktionsforschung (5454, Fraunhofer Verlag; Nummer 5454). https://doi.org/10.18419/opus-8823
  9. Chemnitz, M., Vick, A., Jäger, M., Kretschmer, F., & Doll, U. (2016). Steuerungstechnik aus der Cloud - Mehrwertdienste für cloudbasierte Steuerungsplattformen. SPS MAGAZIN, 11/16, Article 11/16.
  10. Coupek, D., Batke, C., & Marx, D. (2016, Oktober). Additiv gefertigte Werkzeugmaschinen für die Mikrobearbeitung. SCOPE online. http://www.scope-online.de/produktionstechnik-werkzeugmaschinen/additiv-gefertigte-werkzeugmaschinen-fuer-die-mikrobearbeitung.htm
  11. Coupek, D., Kovaleva, D., Christof, H., Wurst, K.-H., Verl, A., Sobek, W., Haase, W., Gresser, G. T., & Lechler, A. (2016). Fabrication of Biomimetic and Biologically Inspired (Modular) Structures for Use in the Construction Industry. In Biomimetic Research for Architecture and Building Construction (S. 319--339). Springer International Publishing.
  12. Coupek, D., Lechler, A., & Verl, A. (2016, November). Cloud-based control for downstream defect reduction in the production of electric motors. 2016 International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles & International Transportation Electrification Conference (ESARS-ITEC). https://doi.org/10.1109/esars-itec.2016.7841361
  13. Cuntz, T. (2016). Untersuchungen zur Eignung mikrohydraulischer Antriebe für die minimal invasive Chirurgie. In Stuttgarter Beiträge zur Produktionsforschung (5353, Stuttgart; Nummer 5353). https://doi.org/10.18419/opus-8821
  14. Drust, M. (2016). Entwicklung eines Sensorsystems und eines Verfahrens zur Berechnung der Roboterpose auf Basis von projizierten Strukturen. In Stuttgarter Beiträge zur Produktionsforschung (5858, Fraunhofer Verlag; Nummer 5858). https://doi.org/10.18419/opus-8986
  15. Ellwein, C. (2016). Forschungsprojekt Rent’n’Produce. Fertigungssysteme über cloud-basierte Plattform steuern. SCOPE Online. https://www.scope-online.de/digitale-fabrik/forschungsprojekt-rent-n-produce.htm
  16. Engelberth, T. (2016). Die Genauigkeit von Antriebssystemen steigern. MM Maschinenmarkt, 9, Article 9.
  17. Engelberth, T., Dietmair, A., & Verl, A. (2016). Modeling and Analysis of Control Valves Applied in Compressor Plants with Consideration of Time-Variable Factors. Proceedings of the 2016 17th International Conference on Mechatronics - Mechatronika (ME) 2016.
  18. Epple, U., Bangemann, T., Bauer, C., Bedenbender, H., Braune, A., Diedrich, C., Diesner, M., Elmas, F., Friedrich, J., Göbe, F., Goldschmidt, T., Grüner, S., Hankel, M., Heidel, R., Hesselmann, K., Hüttemann, G., Klein, M., Löwen, U., Pfrommer, J., … Wollschlaeger, M. (2016). Industrie 4.0 Service Architecture Basic concepts for interoperability (VDI/VDE-Gesellschaft, Hrsg.). https://www.vdi.de/fileadmin/vdi_de/redakteur_dateien/gma_dateien/END_3_Status_Report_Industrie_4_0_-Service_Architecture.pdf
  19. Frey, G., Schumacher, W., Verl, A., Frey, G., Schumacher, W., Verl, A., gGmbH, S. S. P., & IRB-Verlag, F. (2016). Fortschritte in der Antriebs- und Automatisierungstechnik (FAA). Internationaler Kongress. http://www.worldcat.org/search?qt=worldcat_org_all&q=9783839610060
  20. Friedrich, C., Lechler, A., & Verl, A. (2016). The control architecture RoViDiAsS — A robotic visual disassembly and assembly system. 2016 IEEE International Conference on Industrial Technology (ICIT), 113–118. https://doi.org/10.1109/icit.2016.7474735
  21. Friedrich, C., Lechler, A., & Verl, A. (2016). A planning system for generating manipulation sequences for the automation of maintenance tasks. IEEE International Conference on Automation Science and Engineering (CASE), 843–848. https://doi.org/10.1109/COASE.2016.7743489
  22. Friedrich, J., Hinze, C., Lechler, A., & Verl, A. (2016, Juli). On-line learning artificial neural networks for stability classification of milling processes. 2016 IEEE International Conference on Advanced Intelligent Mechatronics (AIM). https://doi.org/10.1109/aim.2016.7576793
  23. Friedrich, J., Maurer, A., Lechler, A., & Verl, A. (2016). Estmation of the Pose-Dependent Stability Lobe Diagram for a new 5-axis Machining Concept. Proceedings of the The International Conference Management of Technology – Step to Sustainable Production (MOTSP 2016).
  24. Held, M., Wehner, D., Hämmerl, R., Dangelmaier, M., Briem, A.-K., Reiff, C., & Wulle, F. (2018). Personalization in the Automotive and Building Sector - Research Program of the High-Performance Center „Mass Personalization“ in Stuttgart. MCP-CE. http://www.mcp-ce.org/images/proceedings/2018/28_Held.pdf
  25. Hölczli, A., Roth, M., Birkhold, M., & Scheifele, C. (2016). Anwendungen, Funktionen und Technologien für Industrie 4.0 – Forschungspotenziale und Handlungsempfehlungen. In Basistechnologien für Industrie 4.0 – DFAM-Studie zum Stand der Technik und aktuellen Forschungs- und Entwicklungspotentialen für KMU. Deutschen Forschungsgesellschaft für Automatisierung und Mikroelektronik e.V. (DFAM).
  26. Karim, A., Waibel, A., & Lechler, A. (2016). Experimentelle Posenanalyse am Bearbeitungsroboter: Ermittlung der Richtungs- sowie Posenabhängigkeit von Industrierobotern für die Fräsbearbeitung. wt Werkstattstechnik online, 2016(5), Article 5. http://www.werkstattstechnik.de/wt/get_article.php?dataarticle_id=85834
  27. Karim, A., Waibel, A., & Lechler, A. (2016). Experimentelle Posenanalyse am Bearbeitungsroboter: Ermittlung der Richtungs- sowie Posenabhängigkeit von Industrierobotern für die Fräsbearbeitung. wt Werkstattstechnik online, 2016(5), Article 5.
  28. Karim, A., & Verl, A. (2016). Acht Achsen für Fünf-Achs-Bearbeitung: Redundante Roboterkinematik mit acht Achsen ermöglicht flexible und produktive Fünf-Achs-Bearbeitung. Robotik in der industriellen Fertigung - Sonderausgabe zur MOTEK 2016, 2016, 2--3.
  29. Karim, A., Waibel, A., Abel, S., & Verl, A. (2016). Durchgängige CAx-Kette bei der mechanischen Bearbeitung mit Industrierobotern: Kosten- und Zeitreduktion durch automatisierte Bearbeitung. wt Werkstattstechnik online, 2016(9), Article 9. http://www.werkstattstechnik.de/wt/get_article.php?dataarticle_id=86421
  30. Keinert, M., Lechler, A., & Verl, A. (2016). Concept of a Computerized Numerical Control Kernel for Execution on Multi-core Processors. IEEE Advanced Motion Control, 599–604.
  31. Keller, M. (2016). Ganzheitliche Methode zur Auslegung von Reinräumen mit definierter organischer Luftreinheit. In Stuttgarter Beiträge zur Produktionsforschung (5151, Fraunhofer Verlag; Nummer 5151). https://doi.org/10.18419/opus-8799
  32. Kraus, W. (2016). Force control of cable-driven parallel robots. In Stuttgarter Beiträge zur Produktionsforschung (4949, Fraunhofer Verlag; Nummer 4949). https://doi.org/10.18419/opus-6899
  33. Kretschmer, F. (2016). Gelbe Seiten für Industrie 4.0. Automat!on praxis. http://automationspraxis.industrie.de/news/systemhaus-des-monats/gelbe-seiten-fuer-die-industrie-4-0/
  34. Kretschmer, F., & Altenberg, J. (2016). Steuerungstechnik aus der Cloud - Echtzeit virtualisiert. SPS MAGAZIN, 07/16, Article 07/16.
  35. Kretschmer, F., Borisov, A., Pöschko, R., Chemnitz, M., & Vick, A. (2016). Steuerungstechnik aus der Cloud. wt Werkstatttechnik online, 106 (2016), Article 106 (2016). http://www.werkstattstechnik.de/wt/currentarticle.php?data%5Barticle_id%5D=85835
  36. Kretschmer, F., Friedl, S., Lechler, A., & Verl, A. (2016). Communication extension for cloud-based machine control of simulated robot processes. 2016 IEEE International Conference on Industrial Technology (ICIT), 54–58. https://doi.org/10.1109/ICIT.2016.7474725
  37. Kretschmer, F., Lechler, A., & Verl, A. (2016, Juni). Gelbe Seiten für Industrie 4.0. VDI AUTOMATION 2016.
  38. Kretschmer, F., Schlechtendahl, J., Pöschko, R., & Kircher, C. (2016). Steuerungstechnik aus der Cloud - Was ist heute bereits möglich? SPS MAGAZIN, 10/16, Article 10/16.
  39. Kübler, K., & Verl, A. (2016). Testautomatisierung im Kontext der virtuellen Inbetriebnahme von Werkzeugmaschinen. In C. Brecher (Hrsg.), Fortschritt-Berichte VDI. Reihe 2 (694; Nummer 694, S. 16–27). VDI Verlag. http://www.worldcat.org/search?qt=worldcat_org_all&q=01789406&dblist=638&fq=dt%3Aser&qt=facet_dt%3A
  40. Mottahedi, M., Coupek, D., Lechler, A., & Verl, A. (2016). New Technologies, Challenges and Trends in Additive Manufacturing for Production of Optimal Topologies. International Journal of Advancements in Research & Technology, 5(8), Article 8.
  41. Mottahedi, M., Coupek, D., Lechler, A., & Verl, A. (2016, Januar 21). Additive Manufacturing: Technology, Trends and Challenges. The 6th International Conference on Economics, Management, Engineering Sciences and Art.
  42. Nebelsick, J. H., Allgaier, C., Felbrich, B., Coupek, D., Reiter, R., Reiter, G., Menges, A., Lechler, A., & Wurst, K.-H. (2016). Continuous Fused Deposition Modelling of Architectural Envelopes Based on the Shell Formation of Molluscs: A Research Review. In Biomimetic Research for Architecture and Building Construction (S. 243--260). Springer International Publishing.
  43. Neher, P. (2016). Drahtlose Echtzeitkommunikation. Industrial Communication Journal, 1/2016.
  44. Neher, P., & Lechler, A. (2016). Concept for Real-Time Wireless Networking of Mobile CPS Based on LTE. Advanced Materials Research, 1140.
  45. Neher, P., Lechler, A., & Verl, A. (2016). Industrielles LTE. Fortschrittsberichte VDI, Reihe 2, Fertigungstechnik.
  46. Neubauer, M., Vieler, H., Armin, L., & Verl, A. (2016). Schwingungsdämpfung bei Industrierobotern – Ein semiaktiver Ansatz zur Verbesserung der Dynamik. atp-edition, 58(10), Article 10.
  47. Oyanguren, A., Zahn, P., Alberdi, A. H., Larranaga, J., Lechler, A., & Ulacia, I. (2016). Preload variation due to temperature increase in double nut ball screws. Production Engineering Research and Development.
  48. Rahäuser, R. (2016). Energieeffizienter Betrieb von Kühlschmierstoff-Reinigungsanlagen mit Anschwemmfiltern. In Stuttgarter Beiträge zur Produktionsforschung (5252, Fraunhofer Verlag; Nummer 5252). https://doi.org/10.18419/opus-8809
  49. Reuss, M., & Apprich, S. (2016). Identification of Transfer Functions of Subsystems. ICPE 2016 - 16th International Conference on Precision Engineering.
  50. Scheifele, C., Lechler, A., Daniel, C., & Xu, W. (2016, April). Real-time extension of ROS based on a network of modular blocks for highly precise motion generation. 2016 IEEE 14th International Workshop on Advanced Motion Control (AMC). https://doi.org/10.1109/amc.2016.7496339
  51. Scheifele, C., Lechler, A., & Verl, A. (2016). Materialflussmodelle für die HiL-Simulation. wt Werkstattstechnik online, 106(3), Article 3.
  52. Scheifele, C., & Verl, A. (2016). Hardware-in-the-Loop Simulation for Machines Based on a Multi-Rate Approach. The 9th Eurosim Congress on Modelling and Simulation, EUROSIM 2016.
  53. Scheifele, S., & Verl, A. (2016). Steuerungsgenerierung aus der virtuellen Maschine. wtonline, 106(5), Article 5. http://www.werkstattstechnik.de
  54. Scheifele, S., & Verl, A. (2016). Automatische HiLS-Generierung für komplexe Maschinen. wt Werkstattstechnik online, 106(7/8), Article 7/8. http://www.werkstattstechnik.de
  55. Scheifele, S., & Verl, A. (2016). Automated Control System Generation Out of the Virtual Machine. Procedia Technology, 26, 349–356. https://doi.org/10.1016/j.protcy.2016.08.045
  56. Schlechtendahl, J. (2016). Framework für die energieoptimale Ansteuerung von Werkzeugmaschinen. In Stuttgarter Beiträge zur Produktionsforschung (5050, Fraunhofer Verlag; Nummer 5050). https://doi.org/10.18419/opus-8741
  57. Sommer, P. (2016). Studie zur Analyse von Interaktionsmöglichkeiten aus dem Konsumerbereich und deren Potentiale für die Automatisierungstechnik (Nr. 12/2016; Nummer Nr. 12/2016). DFAM.
  58. Sommer, P., & Verl, A. (2016). Intelligentes Maschinenfenster in Werkzeugmaschinen mit Hilfe von Augmented Reality. Fortschritt-Berichte VDI, 2(694), Article 694.
  59. Sommer, P., & Verl, A. (2016, November). View-dependent Virtual and Augmented Reality for Machine Tools. 2016 European Modelling Symposium (EMS). https://doi.org/10.1109/ems.2016.035
  60. Sommer, P., & Verl, A. (2016). Smartes Maschinenfenster mit Visualisierungstechnik. MaschinenMarkt, 36, Article 36.
  61. Sun, Z., Pritschow, G., & Lechler, A. (2016). Enhancement of feed drive dynamics using additional table speed feedback. CIRP Annals - Manufacturing Technology, 65(1), Article 1. http://dx.doi.org/10.1016/j.cirp.2016.04.099
  62. Sun, Z., Zahn, P., Verl, A., & Lechler, A. (2016). A new control principle to increase the bandwidth of feed drives with large inertia ratio. The International Journal of Advanced Manufacturing Technology, 1--6. https://doi.org/10.1007/s00170-016-9895-3
  63. Tempel, P., & Pott, A. (2016). Cable-Driven Parallel Robots: Expo 2015 - Forth and Back Again.
  64. Tempel, P., & Pott, A. (2016). Parallele Seilroboter in Theorie und Praxis: Leichtbau, Energieeffizienz und Hohe Dynamiken als Potential, Elastizität als Hauptherausforderung (9). wt Werkstatttechnik Online; Springer VDI-Verlag GmbH & Co. KG. http://www.werkstattstechnik.de/wt/article.php?dataarticle_id=86418
  65. Tempel, P., & Pott, A. (2016). SimTech Status Seminar 2016 - Status Update: Improved Modeling of Cables for Kinematics and Dynamics of Light-weight Robots.
  66. Tempel, P., Verl, A., & Pott, A. (2016). On the Dynamics and Emergency Stop Behavior of Cable-Driven Parallel Robots. In V. Parenti-Castelli & W. Schiehlen (Hrsg.), ROMANSY 21 - Robot Design, Dynamics and Control (Bd. 569, S. 431--438). Springer Verlag and Springer International Publishing. https://doi.org/10.1007/978-3-319-33714-2_48
  67. Vieler, H., Lechler, A., & Grimm, J. (2016). Online Calibration of Industrial Robots using Inertial Sensors. ISR 2016 : 47th International Symposium on Robotics Robotics in the era of digitalisation, 222–227.
  68. Vivanco, J. M., Keinert, M., Lechler, A., & Verl, A. (2016). Analysis and Design of Computerized Numerical Controls for Execution on Multi-core Systems. Procedia \CIRP\, 41, 864–869. http://dx.doi.org/10.1016/j.procir.2015.12.021
  69. Vorderer, M., Fechter, M., Kretschmer, F., & Verl, A. (2016). Wandlungsfähige Produktion von morgen. wt Werkstatttechnik online, 106 (2016), Article 106 (2016). http://werkstattstechnik.de/wt/article.php?data%5Barticle_id%5D=86236
  70. Zahn, P. (2016). Ablöse für den Feldbus - Vernetzung von Antrieben mit echtzeitfähigem Ethernet. In B. Al-Scheikly (Hrsg.), SPS-Magazin: Bd. SPS-Special 2016. http://www.sps-magazin.com/?inc=artikel/article_show&nr=121671
  71. Zahn, P., Neubauer, M., & Lechler, A. (2016). Dynamiksteigerung von Vorschubantrieben. Fortschritte in der Antriebs- und Automatisierungstechnik, 194–203.

2015

  1. Akos, C., Sommer, P., & Lechler, A. (2015). EcoBotics: Advantages and Challenges of building a Bamboo Robot Arm (I. I. C. on Industrial Technology 2015 (ICIT), Hrsg.; S. 192–197). IEEE.
  2. Apprich, S., Wulle, F., Lechler, A., Pott, A., & Verl, A. (2015). Pose-Dependency of Machine Tool Structures: Appearance, Consequences and challenges for Lightweight Large-Scale Machines. International Journal of Mechanical, Aerospace, Induastrial, Mechatronic and Manufacturing Engineering, 9(10), Article 10. http://waset.org/publications/10002894/pose-dependency-of-machine-tool-structures-appearance-consequences-and-challenges-for-lightweight-large-scale-machines
  3. Apprich, S., Wulle, F., Lechler, A., Pott, A., & Verl, A. (2015). Approach for a General Pose-dependent Model of the Dynamic Behavior of Large Lightweight Machine Tools for Vibration Reduction. Procedia \CIRP\, 41, 812–817. http://dx.doi.org/10.1016/j.procir.2015.12.014
  4. Birkhold, M., Friedrich, C., & Lechler, A. (2015). A model-based CNC Architecture for Process Programming. International Conference on Flexible Automation and Intelligent Manufacturing (FAIM), 1–8.
  5. Birkhold, M., Friedrich, C., & Lechler, A. (2015). Automation of the Casting Process using a model-based NC Architecture. IFAC-PapersOnLine, 48(17), Article 17. http://dx.doi.org/10.1016/j.ifacol.2015.10.102
  6. Bock, H.-P. (2015). Fehlertolerante numerische Steuerung. In Stuttgarter Beiträge zur Produktionsforschung (4545, Fraunhofer-Verlag; Nummer 4545). https://doi.org/10.18419/opus-4611
  7. Brix, J. (2015). Entwicklung eines verteilten Energiemanagementsystems. In Stuttgarter Beiträge zur Produktionsforschung (4646, Fraunhofer Verlag; Nummer 4646). https://doi.org/10.18419/opus-4614
  8. Browatzki, B. (2015). Multimodal object perception for robotics [Universität Stuttgart]. https://doi.org/10.18419/opus-4610
  9. Buck, R. (2015). Entwurfsmuster für den Aufbau von Baukästen für das Funktionale Engineering. In Stuttgarter Beiträge zur Produktionsforschung (4141, Fraunhofer-Verlag; Nummer 4141). https://doi.org/10.18419/opus-6875
  10. Colledani, M., Yemane, A., Coupek, D., & Lechler, A. (2015). Quality-oriented Design of Rotor Assembly Strategies for Electric Drive Production Systems. Procedia \CIRP\, 36, 141–146. http://dx.doi.org/10.1016/j.procir.2015.02.225
  11. Coupek, D., Gülec, A., Lechler, A., & Verl, A. (2015). Selective rotor Assembly Using Fuzzy Logic in the Production of Electric Drives. Procedia \CIRP\, 33, 550–555. http://dx.doi.org/10.1016/j.procir.2015.06.074
  12. Eberspächer, P., Schlechtendahl, J., & Colangelo, E. u.a. (2015). Modellbasierte, energieoptimale Produktionssteuerung - Die Reduktion des Energieverbrauchs über mehrere Ebenen der Steuerungshierarchie Teil 1.
  13. Eberspächer, P., Lechler, A., & Verl, A. (2015). Control-integrated consumption graph-based optimisation method for energy reduction of machine tools with automated parameter optimisation: Control-integrated consumption graph-based optimisation method for energy reduction of machine tools with automated parameter optimisation.
  14. Eberspächer, P., L. A. V. A. (2015). Model-Learning for power consumption simulation through control signals: Model-Learning for power consumption simulation through control signals (S. Digital Proceedings--). NAFEMS.
  15. Engelberth, T. (2015). Eigenschaften elektrisch verspannter Zahnstange-Ritzel-Antriebe. Stuttgarter Innovationstage.
  16. Engelberth, T., Apprich, S., Friedrich, J., Coupek, D., & Lechler, A. (2015). Properties of electrically preloaded rack-and-pinion drives. Production Engineering, 9(2), Article 2. http://dblp.uni-trier.de/db/journals/peng/peng9.html#EngelberthAFCL15
  17. Fischer, J. (2015). A user-oriented, comprehensive system for the 6 DoF recognition of arbitrary rigid household objects. In Stuttgarter Beiträge zur Produktionsforschung (4444, Fraunhofer-Verlag; Nummer 4444). https://doi.org/10.18419/opus-4613
  18. Francq, J., & Frick, F. (2015). Overview of hardware trojan detection and prevention methods. ECCTD, 1–4. http://dblp.uni-trier.de/db/conf/ecctd/ecctd2015.html#FrancqF15
  19. Francq, J., & Frick, F. (2015). Introduction to hardware trojan detection methods. In W. Nebel & D. Atienza (Hrsg.), DATE (S. 770–775). ACM. http://dblp.uni-trier.de/db/conf/date/date2015.html#FrancqF15
  20. Frey, S., Lechler, A., & Zahn, P. (2015). Kugelgewindetrieb. In Patent: Bd. DE 10 2015 000 487 B3 2016.02.18. DPMA.
  21. Frick, F., Zahn, P., Lechler, A., & Verl, A. (2015). Modular Design Approach for Model-Based Drive Control Systems on Reconfigurable Logic. Applied Mechanics and Materials, 704, 380–384.
  22. Friedrich, J., Gebele, M., Lechler, A., & Verl, A. (2015). Determining the width and depths of cut in milling on the basis of a multi-dexel model. International Journal of Mechanical, Aerospace, Induastrial, Mechatronic and Manufacturing Engineering, 9(10), Article 10. http://waset.org/publications/10002539/determining-the-width-and-depths-of-cut-in-milling-on-the-basis-of-a-multi-dexel-model
  23. Friedrich, J., Hinze, C., Renner, A., Verl, A., & Lechler, A. (2015). Estimation of stability lobe diagrams in milling with continuous learning algorithms. Robotics and Computer-Integrated Manufacturing. http://dx.doi.org/10.1016/j.rcim.2015.10.003
  24. Friedrich, J., Scheifele, S., Verl, A., & Lechler, A. (2015). Flexible and Modular Control and Manufacturing System. Procedia \CIRP\, 33, 115–120. https://doi.org/10.1016/j.procir.2015.06.022
  25. Gerlach, O., Lechler, A., & Verl, A. (2015). Time constant measurement for control of induction heating processes for thixoforming. MEASUREMENT SCIENCE & TECHNOLOGY, 26(2), Article 2.
  26. Groche, P., Schreiner, J., Hohmann, J., Höhr, S., & Lechler, A. (2015). Qualität durch robuste Prozessketten steigern - Potentiale für die Umformtechnik mit Industrie 4.0: Qualität durch robuste Prozessketten steigern - Potentiale für die Umformtechnik mit Industrie 4.0.
  27. Groh, F. (2015). Numerische Verfahren für Polynomsysteme mit Anwendungen in der Robotik. In Stuttgarter Beiträge zur Produktionsforschung (4242, Fraunhofer-Verlag; Nummer 4242). https://doi.org/10.18419/opus-4612
  28. Held, M., Wehner, D., Hämmerl, R., Dangelmaier, M., Briem, A.-K., Reiff, C., & Wulle, F. (2018). Personalization in the Automotive and Building Sector - Research Program of the High-Performance Center „Mass Personalization“ in Stuttgart. MCP-CE. http://www.mcp-ce.org/images/proceedings/2018/28_Held.pdf
  29. Höhr, S. (2015). Ereigniserkennung in Datenströmen - Vernetzung in der Umformtechnik: Ereigniserkennung in Datenströmen - Vernetzung in der Umformtechnik (S. ).
  30. Höhr, S., & Lechler, A. (2015). Datenverarbeitung in der Umformtechnik - ein Konzept für die Produktionstechnik von morgen. Datenverarbeitung in der Umformtechnik - ein Konzept für die Produktionstechnik von morgen. (S. 65–72--). VDI-Verlag GmbH.
  31. Kaiser, B., Keinert, M., Lechler, A., & Verl, A. (2015). CNC Tool Path Generation on Multi-Core Processors. Applied Mechanics & Materials, 794, 339–346.
  32. Karim, A., Verl, A., & Höhne, R. (2015). Schwingungsanalyse an Bearbeitungsrobotern: Durchführung einer experimentellen Modalanalyse an Industrierobotern. wt Werkstattstechnik online, 2014(1/2-2014), Article 1/2-2014. http://www.werkstattstechnik.de/wt/get_article.php?dataarticle_id=76753
  33. Keinert, M. (2015). OPC UA Informationsmodell für CNC-Datenschnittstellen. In Stuttgarter Innovationstage: Bd. Vorstellung von Innovationen aus Forschung und Industrie zur Steuerung und Regelung in der Fertigungstechnik, Stuttgart, 21. und 22. Oktober 2015.
  34. Keinert, M., & Lechler, A. (2015). OPC UA Informationsmodell für CNC-Datenschnittstellen: Standardisierte Schnittstelle für CNC-Werkzeugmaschinen. In Automation 2015, Benefits of Change – the Future of Automation (VDI-Berichte 2258; Nummer VDI-Berichte 2258). VDI Verlag.
  35. Kübler, K., Neyrinck, A., Schlechtendahl, J., Lechler, A., & Verl, A. (2015). Approach for Manufacturer-independent Automated Machine Tool Control Software Test: Approach for Manufacturer-independent Automated Machine Tool Control Software Test (S. S. 347-354--). TTP Trans Tech Publications, Switzerland.
  36. Kübler, K., Neyrinck, A., Schlechtendahl, J., Lechler, A., & Verl, A. (2015). Approach for Manufacturer Independent Automated Machine Tool Control Software Test (794). 794, Article 794. http://www.worldcat.org/search?qt=worldcat_org_all&q=9783038356165
  37. Laptev, I., Zahn, P., & Günter, P. (2015). Direct sliding mode current control of feed drives. CIRP Annals - Manufacturing Technology 64 (2015) 373–376, 64(1), Article 1. https://doi.org/10.1016/j.cirp.2015.04.093
  38. Merovci, P., Karim, A., & Lechler, A. (2015). Experimentelle Modalanalyse an Industrierobotern: Grundlagenuntersuchung zur Minimierung des Messaufwands. VDI-Z 157, 2015(10-Oktober), Article 10-Oktober.
  39. Neher, P., & Lechler, A. (2015). Using game physics engines for hardware-in-the-loop material flow simulations: benefits, requirements and experiences. 2015 IEEE International Conference on Advanced Intelligent Mechatronics (AIM), 1002–1007. https://doi.org/10.1109/AIM.2015.7222670
  40. Neher, P., & Lechler, A. (2015). Using game physics engines for hardware-in-the-loop material flow simulations. 2015 IEEE International Conference on Advanced Intelligent Mechatronics (AIM 2015), 1002–1007. https://doi.org/10.1109/AIM.2015.7222670
  41. Neyrinck, A., Lechler, A., & Verl, A. (2015). Automatic Variant Configuration and Generation of Simulation Models for Comparison of Plant and Machinery Variants. Procedia CIRP, 29, 62--67.
  42. Sanagoo, A. (2015). Eine neuartige Roboterkinematik für die laparoskopische Single-Port Chirurgie. In Stuttgarter Beiträge zur Produktionsforschung (4343, Fraunhofer-Verlag; Nummer 4343). https://doi.org/10.18419/opus-4598
  43. Scheifele, S., Lechler, A., & Verl, A. (2015). Automated Online Control System Configuration (S. 446–453). University of Wolverhampton, The Choir Press, ISBN 978-1-910864-00-5.
  44. Scheifele, S., Verl, A., & Lechler, A. (2015). Automatisierte Online-Steuerungs(re)konfiguration. wt Werkstattstechnik online, 105(7/8), Article 7/8. http://www.werkstattstechnik.de
  45. Schlechtendahl, J., E. P. S. P. V. A. A. E. (2015). Multi-level energy demand optimizer system for machine tool controls: Multi-level energy demand optimizer system for machine tool controls (S. S. 1-6--). Elsevier.
  46. Schmitt, S., Lechler, A., & Röhrle, O. (2015). Modellierung und Simulation als Werkzeug für das Design von Mensch-Maschine-Systemen: Modellierung und Simulation als Werkzeug für das Design von Mensch-Maschine-Systemen (S. 178–184--). Springer Vieweg.
  47. Seyboldt, C., Schubert, T., Gerlach, O., Liewald, M., Weißgärber, T., & Lechler, A. (2015). Semi-solid Formgebung von AMC-Werkstoffen. wt Werkstattstechnik online, 105(10), Article 10.
  48. Sommer, P., Atmosudiro, A., Schlechtendahl, J., Lechler, A., & Verl, A. (2015). iWindow - Concept of an intelligent window for machine tools using augmented reality (4th International Conference on Virtual Machining Process Technology (VMPT 2015), Hrsg.; S. ).
  49. Tempel, P. (2015). SimTech Milestone Report: Improved Modeling of Cables for Kinematics and Dynamics of Cable-driven Parallel Robots.
  50. Tempel, P. (2015). SimTech Status Seminar 2015 - Status Update: Improved Modeling of Cables for Kinematics and Dynamics of Light-weight Robots.
  51. Tempel, P., Miermeister, P., Lechler, A., & Pott, A. (2015). Modelling of Kinematics and Dynamics of the IPAnema 3 Cable Robot for Simulative Analysis. AMM, 794, 419--426. https://doi.org/10.4028/www.scientific.net/amm.794.419
  52. Tempel, P., Miermeister, P., & Pott, A. (2015). Kinematics and Dynamics Modeling for Real-Time Simulation of the Cable-Driven Parallel Robot IPAnema 3. Proceedings of the 14th IFToMM World Congress, 14th–2, Article 14th–2. https://doi.org/10.6567/IFToMM.14TH.WC.OS4.020
  53. Tempel, P., Schnelle, F., Pott, A., & Eberhard, P. (2015). Design and Programming for Cable-Driven Parallel Robots in the German Pavilion at the EXPO 2015. Machines, 3(3), Article 3. https://doi.org/10.3390/machines3030223
  54. Vieler, H., Karim, A., & Lechler, A. (2015). Drive Based Damping for Robots with Secondary Encoders.
  55. Vieler, H., & Lechler, A. (2015). Intelligente Schnittstellen für intelligente Werkzeuge. wt Werkstattstechnik online, 105(7/8), Article 7/8.
  56. Xie, L., Scheifele, C., Xu, W., & Stol, K. A. (2015, März). Heavy-duty omni-directional Mecanum-wheeled robot for autonomous navigation: System development and simulation realization. 2015 IEEE International Conference on Mechatronics (ICM). https://doi.org/10.1109/icmech.2015.7083984

2014

  1. A.Verl, S. Frey, T. H. (2014). Double nut ball screw with improved operating characteristics: Double nut ball screw with improved operating characteristics (S. 361–364--). Elsevier.
  2. Abel, M., Eger, U., Frick, F., Hoher, S., & Lechler, A. (2014). Systemkonzept für eine echtzeitfähige Kollisionsüberwachung von Werkzeugmaschinen unter Nutzung von Multicore-Architekturen (S. S. 441-445--). Apprimus Verlag.
  3. Atmosudiro, A., Faller, M., & Verl, A. (2014). Durchgängige Datenintegration in die Cloud: Durchgängige Datenintegration in die Cloud.
  4. Atmosudiro, A., Keinert, M., Karim, A., Lechler, A., Verl, A., & Csizar, A. (2014). Productivity Increase through Joint Space Path Planning for Robot Machining. Modelling Symposium (EMS), 2014 European, 257–262. https://doi.org/10.1109/EMS.2014.46
  5. Batke, C. (2014). Die gedruckte Werkzeugmaschine für die Mikrofertigung: Die gedruckte Werkzeugmaschine für die Mikrofertigung (S. ).
  6. Batke, C., Wurst, K.-H., Lechler, A., & Verl, A. (2014). The printed machine tool for micro machining: The printed machine tool for micro machining (S. S. 433-440--). Trans Tech Publications, ISBN: 978-3-03835-245-7.
  7. Birkhold, M., & Lechler, A. (2014). Modellierung von Automatisierungssystemen nach Vorgaben des BSIBundesministerium für Sicherheit in der Informationstechnik: Notwendigkeit,Modellkonzept, Vorteile: Modellierung von Automatisierungssystemen nach Vorgaben des BSIBundesministerium für Sicherheit in der Informationstechnik: Notwendigkeit,Modellkonzept, Vorteile.
  8. Birkhold, M., & Bauer, J. (2014). Sicherheit in der Automatisierungstechnik nachBSI IT - Grundschutz, geht das? Sicherheit in der Automatisierungstechnik nachBSI IT - Grundschutz, geht das? (S. ).
  9. Birkhold, M., Lechler, A., & u.a. (2014). Industrie 4.0 - Chance für die Umformtechnik: Industrie 4.0 - Chance für die Umformtechnik.
  10. Brisan, C., Boanta, C., Csiszar, A., & Verl, A. (2014). Aspects Concerning Kinetostatic Properties of Parallel Robots: Aspects Concerning Kinetostatic Properties of Parallel Robots (S. 1–6--). VDE Verlag.
  11. Christian Friedrich, Andreas Stanicki, M. B. A. L. A. V. (2014). A Robust Algorithm for Autotuning Controllers in Mechatronic Modules: A Robust Algorithm for Autotuning Controllers in Mechatronic Modules (S. 451–458--). Trans Tech Publications TTP.
  12. Colledani, M., Coupek, D., Verl, A., Aichele, J., & Yemane, A. (2014). Design and Evaluation of In-line Product Repair Strategies for Defect Reduction in the Production of Electric Drives. Procedia \CIRP\, 21, 159–164. http://dx.doi.org/10.1016/j.procir.2014.03.186
  13. Coupek, D., Friedrich, J., Verl, A., & Lechler, A. (2014). Modular Information Sharing Platform for Real-Time Data Processing and Knowledge Extraction in Modern Production Systems.
  14. Coupek, D., & Verl, A. (2014). Ausschussreduzierung und Defektkompensation in mehrstufigen Produktionssystemen: Ausschussreduzierung und Defektkompensation in mehrstufigen Produktionssystemen (S. 82–91--). VDI Verlag.
  15. Coupek, D., Verl, A., Lechler, A., Aichele, J., & Junker, S. (2014). Defect reduction in the production of electric drives by downstream compensation and space-resolved inspection. Electric Drives Production Conference (EDPC), 2014 4th International, 1–8. https://doi.org/10.1109/EDPC.2014.6984428
  16. Dripke, C., Groh, F., Keinert, M., & Verl, A. (2014). A New Approach to Interpolation of Tool Path Trajectories with Piecewise Defined Clothoids. In Enabling Manufacturing Competitiveness and Economic Sustainability: Bd. Proceedings of the 5th International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV 2013) (S. 249–254). Springer.
  17. Frey, S. (2014). Verbesserung des dynamischen Verhaltens von Vorschubantrieben durch semiaktiveDämpfung: Verbesserung des dynamischen Verhaltens von Vorschubantrieben durch semiaktiveDämpfung (S. ).
  18. Frick, F., Lechler, A., & Verl, A. (2014). Adaptable Control Systems Through User-Reconfigurable SOPC Architectures.
  19. Friedrich, C., & Lechler, A. (2014). Automatisierung von Instandhaltungsaufgaben- Höhere Verfügbarkeit durch den Einsatz von Servicerobotern. Ingenieurspiegel, 38–39.
  20. Friedrich, C., Lechler, A., & Verl, A. (2014). Autonomous Systems for Maintenance Tasks – Requirements and Design of a Control Architecture. Procedia Technology, 15, 595–604.
  21. Friedrich, C., Stanicki, A., Broecker, M., Lechler, A., & Verl, A. (2014). A Robust Algorithm for Autotuning Controllers in Mechatronic Modules. WGP Congress 2014, 1018, 451--458. https://doi.org/10.4028/www.scientific.net/AMR.1018.451
  22. Friedrich, J., Hartmann, H., Verl, A., & Lechler, A. (2014). Continuous learning support vector machine to estimate stability lobe diagrams in milling. Proceedings of the 24th International Conference on Flexible Automation & Intelligent Manufacturing. https://doi.org/10.14809/faim.2014.0641
  23. Held, M., Wehner, D., Hämmerl, R., Dangelmaier, M., Briem, A.-K., Reiff, C., & Wulle, F. (2018). Personalization in the Automotive and Building Sector - Research Program of the High-Performance Center „Mass Personalization“ in Stuttgart. MCP-CE. http://www.mcp-ce.org/images/proceedings/2018/28_Held.pdf
  24. Höhr, S. (2014). Datenverarbeitung in der Umformtechnik - Ein Konzept für die Produktionstechnik von morgen: Datenverarbeitung in der Umformtechnik - Ein Konzept für die Produktionstechnik von morgen (S. ).
  25. Karim, A., Verl, A., & Höhne, R. (2014). Schwingungsanalyse an Bearbeitungsrobotern: Durchführung einer experimentellen Modalanalyse an Industrierobotern. wt Werkstattstechnik online, 104(1/2), Article 1/2. http://www.werkstattstechnik.de/wt/get_article.php?dataarticle_id=76753
  26. Keinert, M. (2014). Schnittstelle verbessert Kommunikation zwischen HMI und Steuerung. VDW Branchenreport, 02/2014, Article 02/2014.
  27. Keinert, M. (2014). Untersuchung von NC-Steuerungen auf Parallelisierbarkeit. In Parallel 2014, Karlsruhe, 5.-7. Mai 2014.
  28. Keinert, M., Kaiser, B., Lechler, A., & Verl, A. (2014). Analysis of CNC Software Modules regarding Parallelization Capability. Proceedings of the 24th International Conference on Flexible Automation & Intelligent Manufacturing FAIM 2014, 79–86.
  29. Keinert, M., Kretschmer, F., & Lechler, A. (2014). Testbench zur ganzheitlichen Abbildung und Validierung von OPC UA vernetzten Systemen. Tagungsband SPS/IPC/Drives 2014, Internationale Fachmesse & Kongress, 25.-27. Nov. 2014, Nürnberg, 130–137.
  30. Keinert, M., Lechler, A., & Verl, A. (2014). Multicore-CNC: Partitionierung numerischer Steuerungen zur Ausführung auf Multicore-Processoren. VDI-Berichte 2231, Automation 2014, 903–918.
  31. Keinert, M., & Verl, A. (2014). OPC UA als Treiber flexibler Produktion. In Fortschritt-Berichte VDI: Bd. Effiziente Produktion (689; Nummer 689, S. 1–10). VDI Verlag.
  32. Kretschmer, F. (2014). Teilnehmerverwaltung und -zuordnung innerhalb einer cloudbasierten Steuerungsplattform: Teilnehmerverwaltung und -zuordnung innerhalb einer cloudbasierten Steuerungsplattform (S. ).
  33. Lapusan, C., Fodor, F., Csiszar, A., Verl, A., & Brisan, C. (2014). Aspects concerning the modeling of robots with increased dexterity: Aspects concerning the modeling of robots with increased dexterity (S. 1–6--). VDE.
  34. Lechler, A., Eberspächer, P., & Birkhold, M. (2014). Steuerungstechnische Methoden zur effizienten Produktion: Steuerungstechnische Methoden zur effizienten Produktion (S. 73–88--). Werkstoff-Informationsgesellschaft mbH.
  35. Lechler, A., Eberspächer, P., & Birkhold, M. (2014). Control based methods for an efficient production: Control based methods for an efficient production (S. 73–87--). Werkstoff-Informationsgesellschaft mbH.
  36. Lechler, A., Macias, T., & Atmosudiro, A. (2014). Automatic Conformance Test Generation Based on a Verified Model of a Bus System Standard. Procedia \CIRP\, 25, 305–312. http://dx.doi.org/10.1016/j.procir.2014.10.043
  37. Lin, Y., Sun, Z., Dadalau, A., & Verl, A. (2014). Efficient Combination of Topology and Parameter Optimization. OJOp, 03(03), Article 03. https://doi.org/10.4236/ojop.2014.33003
  38. Mottahedi, M. (2014). Modellkalibration in optiSlang: Modellkalibration in optiSlang (S. ).
  39. Mottahedi, M., L. A. (2014). Topologisch optimierte Bauteile für generative Fertigungsverfahren: Topologisch optimierte Bauteile für generative Fertigungsverfahren (S. ).
  40. Mottahedi, M., L. A. (2014). Modellbasiertes Condition Monitoring mit optiSLang: Ursache und Wirkung: Modellbasiertes Condition Monitoring mit optiSLang: Ursache und Wirkung.
  41. Mottahedi, M., V. A. L. A. (2014). Simulationsbasierte Condition Monitoring durch Modellkalibration, Nürnberg, Juni 2014: Simulationsbasierte Condition Monitoring durch Modellkalibration, Nürnberg, Juni 2014 (S. ).
  42. Neher, P., Faller, M., & Verl, A. (2014). Prozessbegleitendes Abtrags-Monitoring bei der Fräsbearbeitung in der Cloud: Prozessbegleitendes Abtrags-Monitoring bei der Fräsbearbeitung in der Cloud (S. S. 79-85--). Apprimus Verlag.
  43. Neyrinck, A., & Verl, A. (2014). Methode zum simulationsbasierten Effizienzvergleich im baukastenbasierten Engineering. Fortschritt-Berichte VDI, Reihe 2: Fertigungstechnik, Effiziente Produktion, ABS-Treffen 2013, Treffen von Mitarbeitern des WZL der RWTH Aachen, ISW der Universität Stuttgart und PTZ Berlin, Berlin, DE, 11.-12. Jul, 2013(689), Article 689.
  44. Philipp Eberspächer, Philipp Schraml, J. S. A. V. E. A. (2014). A Model- and Signal-based Power Consumption Monitoring Concept for Energetic Optimization of Machine Tools: A Model- and Signal-based Power Consumption Monitoring Concept for Energetic Optimization of Machine Tools (S. 44–49--). Elsevier.
  45. Pott, A. u.a. (2014). Industrieroboter und Handhabungsgeräte: Industrieroboter und Handhabungsgeräte (S. 316–336--). Hanser.
  46. Scheifele, S., Friedrich, J., Lechler, A., & Verl, A. (2014). Flexible, self-configuring control system for a modular production system. Procedia Technology, Volume 15, 398–405. https://doi.org/10.1016/j.protcy.2014.09.094
  47. Scheifele, S., Friedrich, J., Lechler, A., & Verl, A. (2014). Modular Production System for Flexible and Localized Production.
  48. Schlechtendahl, J. (2014). Funktionsweise und Zertifizierung CIP Safety on Sercos (S. ).
  49. Schlechtendahl, J., Keinert, M., Kretschmer, F., Lechler, A., & Verl, A. (2014). Making Existing Production Systems Industry 4.0-Ready. Production Engineering Research and Development, 9(1), Article 1.
  50. Schlechtendahl, J., Kretschmer, F., Contreras, L., & Lechler, A. (2014). Cloudbasierte Steuerungen für teilautomatisierte Handarbeitsplätze (S. 0–0--). Apprimus Verlag.
  51. Schlechtendahl, J., Kretschmer, F., Lechler, A., & Verl, A. (2014). Communication mechanisms for cloud based machine controls (S. ).
  52. Schlechtendahl, J., Zhiqian, S., Kretschmer, F., Xu, X., & Lechler, A. (2014). Study of network capability for cloud based control systems (S. n.v.--). DEStech Publications, Inc.
  53. Spiller, A. (2014). Unterstützung der Werkstückhandhabung kooperierender Industrieroboter durch Kraftregelung [Universität Stuttgart]. http://dx.doi.org/10.18419/opus-4579
  54. Sun, Z., Dadalau, A., & Verl, A. (2014). Generation of rotation matrix for assembly models with arbitrary angle constraints. The international joural of advanced manufacturing technology, 47(1), Article 1.
  55. T. Engel (Heinze), A. Lechler, A. V. (2014). Adaptive Friction Bearing for Reduction of Stick-Slip Effects: Adaptive Friction Bearing for Reduction of Stick-Slip Effects (S. 351–356--). WGP Annals.
  56. Tempel, P. (2014). SimTech Status Seminar 2014 - Status Update: Improved Modeling of Cables for Kinematics and Dynamics of Light-weight Robots.
  57. Tempel, P. (2014). Cable-Driven Parallel Robots - An Innovative Technology for Manufacturing Industry and Entertainment (S. ).
  58. Verl, A., & Lechler, A. (2014). Steuerung aus der Cloud: Steuerung aus der Cloud (S. 235–247--). Springer Fachmedien.
  59. Voß, M., & Lechler, A. (2014). Serviceorientierung in der Automatisierungstechnik: Serviceorientierung in der Automatisierungstechnik.
  60. Voß, M., Schnierle, M., & Verl, A. (2014). Automatisierte Energiemanagementsysteme für Hochregallager: Automatisierte Energiemanagementsysteme für Hochregallager.
  61. Zahn, P., Laptev, I., & Verl, A. (2014). Konzept offener Regler: FPGA in der Antriebstechnik. atp edition, 56(06), Article 06. http://dx.doi.org/10.17560/atp.v56i06.294

2013

  1. A., L. (2013). Open Architecture. Open Architecture. (S. ).
  2. Abel, M., & Klemm, P. (2013). Flexible SOA based Platform for Research on Start-up Procedures forReconfigurable Production Machines: Flexible SOA based Platform for Research on Start-up Procedures forReconfigurable Production Machines (S. ).
  3. Atmosudiro, A. (2013). Test und Zertifizierung von Sercos: Test und Zertifizierung von Sercos (S. ).
  4. Batke, C., Wurst, K.-H., & Verl, A. (2013). Die gedruckte Werkzeugmaschine: Die gedruckte Werkzeugmaschine (S. ).
  5. Birkhold, M., Abel, M., & Verl, A. (2013). INTRODUCING AN AUTOMATED RECONFIGURATION MECHANISM FOR FLEXIBLE METAL FORMING SYSTEMS USING A WEB SERVICE-BASED ARCHITECTURE APPROACH: INTRODUCING AN AUTOMATED RECONFIGURATION MECHANISM FOR FLEXIBLE METAL FORMING SYSTEMS USING A WEB SERVICE-BASED ARCHITECTURE APPROACH (S. ).
  6. Birkhold, M., F.-B., P., Lechler, A., & Verl, A. (2013). Zündende Ideen in der Umformtechnik: Zündende Ideen in der Umformtechnik (S. ).
  7. Birkhold, M., & Lechler, A. (2013). Steuerungskonzept ohne Sicherheitslücken: Steuerungskonzept ohne Sicherheitslücken (S. ).
  8. Birkhold, M., & Pauli, F.-B. (2013). Vom Blech zum Halter in einem Tool: Vom Blech zum Halter in einem Tool (S. ).
  9. Birkhold, M., & Verl, A. (2013). Reducing the Development Time of Flexible Metal Forming Tools using Hardware-in the-loop Simulation: Reducing the Development Time of Flexible Metal Forming Tools using Hardware-in the-loop Simulation (S. ).
  10. Coupek, D., Verl, A., Aichele, J., & Colledani, M. (2013). Proactive quality control system for defect reduction in the production of electric drives. Electric Drives Production Conference (EDPC), 2013 3rd International, 1–6. https://doi.org/10.1109/EDPC.2013.6689762
  11. Eberspächer, P., & Verl, A. (2013). Realizing Energy Reduction of Machine Tools Through a Control-integratedConsumption Graph-based Optimization Method: Realizing Energy Reduction of Machine Tools Through a Control-integratedConsumption Graph-based Optimization Method (S. ).
  12. Eberspächer, P., & Verl, A. (2013). ECOMATION - Energieeffiziente Steuerung von Werkzeugmaschinen: ECOMATION - Energieeffiziente Steuerung von Werkzeugmaschinen (S. ).
  13. Friedrich, J., & Verl, A. (2013). In-process Control for Adaptive Spindle Speed Variation and Selection. Proceedings of the International Conference on  Advanced Manufacturing Engineering and Technologies  NEWTECH 2013, 117–126. http://www.diva-portal.org/smash/get/diva2:660817/FULLTEXT08.pdf#page=117
  14. Friedrich, J., & Verl, A. (2013). Adaptive spindle speed variation to improve process stability. Proceedings of the 22nd International Conference on Production Research.
  15. Haag, H., Eberspächer, P., Siegert, J., Bauernhansl, T., & Verl, A. (2013). Energieoptimierung in der spanenden Fertigung -Energieverbrauch von der Planung bis zur optimalen Steuerung reduzieren: Energieoptimierung in der spanenden Fertigung -Energieverbrauch von der Planung bis zur optimalen Steuerung reduzieren (S. ).
  16. Held, M., Wehner, D., Hämmerl, R., Dangelmaier, M., Briem, A.-K., Reiff, C., & Wulle, F. (2018). Personalization in the Automotive and Building Sector - Research Program of the High-Performance Center „Mass Personalization“ in Stuttgart. MCP-CE. http://www.mcp-ce.org/images/proceedings/2018/28_Held.pdf
  17. Hoffmeister, H.-W., Gerdes, A., Wurst, K.-H., Verl, A., & Heinze, T. (2013). Entwicklung eines Leichtbau-Werkzeugmaschinengstells aus CFK mit Hilfe derFiniten-Elmente: Entwicklung eines Leichtbau-Werkzeugmaschinengstells aus CFK mit Hilfe derFiniten-Elmente (S. ).
  18. Hoffmeister, H.-W., G. A. V. A. W. K.-H. H. T. B. C. (2013). Investigations of a small Machine Tool with CFRP-frame: Investigations of a small Machine Tool with CFRP-frame (S. ).
  19. Hoher, S., Neher, P., & Verl, A. (2013). Analysis and evaluation of collision detection libraries for collision monitoring of multi-channel control applications: Analysis and evaluation of collision detection libraries for collision monitoring of multi-channel control applications (S. ).
  20. Hoher, S., Neher, P., & Verl, A. (2013). Collision: Impossible - Echtzeitfähige 3D-Kollisionkontrolle bei mehrkanaliger Bearbeitung: Collision: Impossible - Echtzeitfähige 3D-Kollisionkontrolle bei mehrkanaliger Bearbeitung (S. S. 101-111--). VDE Verlag GmbH.
  21. Karim, A., & Verl, A. (2013). Challenges and obstacles in robot-machining. In Proceedings of the 44th International Symposium on Robotics, IEEE  ISR 2013, Seoul, Korea (South), October 24-26, 2013 (S. 1--4). IEEE. https://doi.org/10.1109/ISR.2013.6695731
  22. Keinert, M. (2013). OPC UA - eine Positionsbestimmung. Computer&Automation, 5–2013, Article 5–2013. http://www.computer-automation.de/steuerungsebene/bedienen-beobachten/artikel/97031/
  23. Keinert, M. (2013). Vernetzung von Steuerung und HMI-Anwendungen durch OPC UA. In Stuttgarter Innovationstage: Bd. Steuerungstechnisches Forum STF’13, 15. und 16. Oktober 2013.
  24. Keinert, M. (2013). Smartphone-Anwendungen für den Einsatz im Bereich der Werkzeugmaschinen und Industrieroboter. In Maschinenbauforum: Bd. Automation Schweiz 2013, Winterthur.
  25. Keinert, M., & Pruschek, P. (2013). Aufwertung von HMI-Systemen durch Design, Austauschbarkeit und Intelligenz. In marcus evans: Bd. Innovative Systemtechnologie HMI, 24.-25. September 2013, Stuttgart Sindelfingen.
  26. Lechler, A. (2013). Industrie 4.0: Maschinensteuerung in der Cloud: Industrie 4.0: Maschinensteuerung in der Cloud (S. ).
  27. Lechler, A. (2013). Trends in der Steuerungstechnik der Fertigungseinrichtungen- Potentiale in der Intralogistik -: Trends in der Steuerungstechnik der Fertigungseinrichtungen- Potentiale in der Intralogistik - (S. ).
  28. Lechler, A. (2013). Cloud-based Control Mechanisms for Manufacturing: Cloud-based Control Mechanisms for Manufacturing (S. ).
  29. Lechler, A., Keinert, M., Eberspächer, P., Batke, C., & Schlechtendahl, J. (2013). Analyse von Anwendungsfällen für OPC-UA als einheitliche Schnittstelle für Maschinendaten (OPC-UA): Bd. Studie (9/2013; Nummer 9/2013). Deutsche Forschungsgesellschaft für Automatisierung und Mikroelektronik e.V. (DFAM).
  30. Lopes, J., Wurst, K.-H., & Verl, A. (2013). Industrial Powerline Communication for Machine-tools and Industrial Robots: Industrial Powerline Communication for Machine-tools and Industrial Robots (S. ).
  31. M., A., & P., K. (2013). Flexible Plattform für die Erforschung vonautomatisierten Inbetriebnahmeprozessen fürrekonfigurierbare ProduktionsmaschinenNach dem Konzept „Universal Plug and Produce“: Flexible Plattform für die Erforschung vonautomatisierten Inbetriebnahmeprozessen fürrekonfigurierbare ProduktionsmaschinenNach dem Konzept „Universal Plug and Produce“ (S. ).
  32. M., B., F.-B., P., A., L., & A., V. (2013). On The Development Of Transformable Sheet Metal Forming Tools: On The Development Of Transformable Sheet Metal Forming Tools (S. ).
  33. Michael Abel, T. H. (2013). Die rekonfigurierbare Maschine: Die rekonfigurierbare Maschine (S. ).
  34. Mottahedi M., Verl, A. R. S. (2013). Numerische Berechnung der Hertzschen Pressung von wälzenden Komponenten, ACUM2013, Mannheim: Numerische Berechnung der Hertzschen Pressung von wälzenden Komponenten, ACUM2013, Mannheim (S. ).
  35. Mottahedi, M., V. A. (2013). Online Condition Monitoring mittels simulationsbasierterParameteridentifikation, LRS 2013, Stuttgart: Online Condition Monitoring mittels simulationsbasierterParameteridentifikation, LRS 2013, Stuttgart (S. ).
  36. Neyrinck, A., Kaupp, M., & Verl, A. : (2013). Fähigkeitenbasierte Variantenerzeugung für den simulativen Anlagenvergleich. wt Werkstattstechnik online, 103(5), Article 5.
  37. Neyrinck, A., & Verl, A. (2013). Effiziente Erzeugung von Simulationsmodellen für den Variantenvergleich von Maschinen und Anlagen. Elektrische Automatisierung - Systeme und Komponenten : internationale Fachmesse und Kongress ; SPS IPC Drives, Nürnberg, 26.-28.11.2013.
  38. Pott, A. (Hrsg. ), & Bruckmann, T. (Hrsg. ). (2013). Cable-Driven Parallel Robots: Cable-Driven Parallel Robots (S. ). Springer.
  39. R., R. (2013). Energieeffizienzsteigerung der Kühlschmierstoffversorgung in der spanenden Fertigung: Energieeffizienzsteigerung der Kühlschmierstoffversorgung in der spanenden Fertigung (S. ).
  40. Reboredo, P., & Keinert, M. (2013). Integration of discrete manufacturing field devices data and services based on OPC UA. Industrial Electronics Society, IECON 2013 - 39th Annual Conference of the IEEE, 4476–4481. https://doi.org/10.1109/IECON.2013.6699856
  41. Schlechtendahl, J. (2013). An Approach for a Cloud-based Machine Tool Control, Proceedings of the 46thCIRP conference on Manufacturing System, Setubal, Portugal, 28.-31. Mai 2013 (S. ).
  42. Schlechtendahl, J. (2013). Automatisieren mit der Cloud - zwei Anwendungsbeispiele (S. ).
  43. Schlechtendahl, J. (2013). Cloudbasierte Maschinen- und Anlagensteuerung (S. ).
  44. Schlechtendahl, J., Lechler, A., & Verl, A. (2013). Skalierbare Rechenleistung für die Automation (S. ).
  45. Schlechtendahl, J., Lechler, A., & Verl, A. (2013). Steuern aus der Cloud.
  46. Siegfried Frey, A. V. (2013). Selective Friction Damping of High Performance Feed Drives: Selective Friction Damping of High Performance Feed Drives (S. ).
  47. Sun, Z., Dadalau, A., & Verl, A. (2013). Component oriented and automatic generation of FE models for parallel kinematics. Production Engineering, 7(2–3), Article 2–3. http://dblp.uni-trier.de/db/journals/peng/peng7.html#SunDV13
  48. Verl, A., Lechler, A., Wesner, S., Kirstädter, A., Schlechtendahl, J., Schubert, L., & Meier, S. (2013). An Approach for a Cloud-based Machine Tool Control (S. 682–687--). Elsevier.
  49. Verl, A., Zahn, P., Frick, F., & Eberspächer, P. (2013). Verfahren zur Identifikation und/oder Wiedererkennung von Komponenten eines elektromechanischen Systems. In Patent: Bd. DE 10 2013 017 045 A1 2015.04.09. DPMA.
  50. Wulfsberg, J. P., Verl, A., Wurst, K.-H., Grimske, S., Batke, C., & Heinze, T. (2013). Modularity in small machine tools: Modularity in small machine tools (S. ).
  51. Zahn, P. (2013). FPGA-basiertes offenes Reglersystem mit hybrider Architektur.
  52. Zahn, P. (2013). Open architecture for controlling an active propelled knee prosthesis.
  53. Zahn, P., Laptev, I., & Verl, A. (2013). FPGA in der Antriebstechnik - Konzepte für offene Reglersysteme am Beispiel einer aktiv angetriebenen Knieprothese. Tagungsband 10. Fachkonferenz.

2012

  1. A. Dadalau, A. V. (2012). Modeling linear guide systems with CoFEM - experimental validation: Modeling linear guide systems with CoFEM - experimental validation (S. ).
  2. A. Verl, K.-H. Wurst, H.-W. H. T. H. A. G. (2012). Kleine Werkzeugmaschinen für kleine Werkstücke - Neuer Gestaltungsansatz durchkooperative Bewegung: Kleine Werkzeugmaschinen für kleine Werkstücke - Neuer Gestaltungsansatz durchkooperative Bewegung (S. ).
  3. Alexander Verl, S. F. (2012). Improvement of Feed Drive Dynamics by Means of Semi-active Damping: Improvement of Feed Drive Dynamics by Means of Semi-active Damping (S. ).
  4. Apprich, S., Huf, A., & Verl, A. (2012). Steigerung der Resourceneffizienz durch die ganzheitliche Betrachtung vonflexiblen Produktionsanlagen, in Resourceneffiziente Produktion. Ressourceneffiziente Produktion, Fortschritt-Berichte VDI(684), Article 684.
  5. Birkhold, M., & Schlechtendahl, J. (2012). Sicherheit in der cloud-basierten Steuerungstechnik (S. ).
  6. Birkhold, M., & Verl, A. (2012). Research Approaches Enabling Transformability for the Metal Forming Industry: Research Approaches Enabling Transformability for the Metal Forming Industry (S. ).
  7. Buck, R. (2012). Mehr Konfiguration weniger Engineering: Naheliegende Optimierungspotenziale im Maschinen- und Anlagenbau am Beispiel der Harro Höfliger Verpackungsmaschinen GmbH: Mehr Konfiguration weniger Engineering: Naheliegende Optimierungspotenziale im Maschinen- und Anlagenbau am Beispiel der Harro Höfliger Verpackungsmaschinen GmbH (S. ).
  8. Buck, R., Lewek, J., & Verl, A. (2012). Dezentrale Konfiguration von Maschinen und Anlagen: Dezentrale Konfiguration von Maschinen und Anlagen (S. ).
  9. Buck, R., & Litto, M. (2012). Durchgängige Auftragsbearbeitungsprozesse für Maschinen und Anlagen vom Vertrieb bis zur Inbetriebnahme: Durchgängige Auftragsbearbeitungsprozesse für Maschinen und Anlagen vom Vertrieb bis zur Inbetriebnahme (S. ).
  10. Buck, R., L. J. V. A. (2012). Funktionales Engineering: Unterstützung firmenübergreifender Engineeringprozesse: Funktionales Engineering: Unterstützung firmenübergreifender Engineeringprozesse (S. ).
  11. Eberspächer, P., Haag, H., Rahäuser, R., Schlechtendahl, J., Verl, A., Bauernhansl, T., & Westkämper, E. (2012). Automated Provision and Exchange of Energy Information throughout theProduction Process (S. ).
  12. Eberspächer, P. (2012). Eficiencia energética na Produção Industrial- Energieeffizienz bei Fertigungsprozessen: Eficiencia energética na Produção Industrial- Energieeffizienz bei Fertigungsprozessen (S. ).
  13. Eberspächer, P. (2012). Eficiencia Energética na Industria- Energieeffizienz in der Industrie: Eficiencia Energética na Industria- Energieeffizienz in der Industrie (S. ).
  14. Eberspächer, P. (2012). Zustandsmodell-basierte Energieverbrauchsoptimierung von Werkzeugmaschinendurch Steuerungstechnik: Zustandsmodell-basierte Energieverbrauchsoptimierung von Werkzeugmaschinendurch Steuerungstechnik (S. ).
  15. Gerlach, O., Borrelli, D., & Verl, A. (2012). Steuerung und Regelung mit konventionellem Ethernet: Steuerung und Regelung mit konventionellem Ethernet. wt Werkstattstechnik online, 102(5), Article 5.
  16. Heinze T., Koch S., V. A. (2012). Adaptive Friction Bearings: Adaptive Friction Bearings (S. ).
  17. Held, M., Wehner, D., Hämmerl, R., Dangelmaier, M., Briem, A.-K., Reiff, C., & Wulle, F. (2018). Personalization in the Automotive and Building Sector - Research Program of the High-Performance Center „Mass Personalization“ in Stuttgart. MCP-CE. http://www.mcp-ce.org/images/proceedings/2018/28_Held.pdf
  18. Hoher, S., V. A. (2012). Multi-Simulator-Materialflusssimulation für die virtuelle Inbetriebnahme: Multi-Simulator-Materialflusssimulation für die virtuelle Inbetriebnahme (S. ).
  19. Huf, A. (2012). Kumulative Lastermittlung aus Antriebsdaten zur Zustandbewertung vonWerkzeugmaschinenkomponenten: Kumulative Lastermittlung aus Antriebsdaten zur Zustandbewertung vonWerkzeugmaschinenkomponenten (S. ).
  20. Keinert, M., & Verl, A. (2012). Smartphone-Anwendungen im Bereich der Werkzeugmaschinen und Industrieroboter. Tagungsband SPS/IPC/Drives 2012, Fachmesse & Kongress, 27.-29. Nov. 2012, Nürnberg, 187–195.
  21. Keinert, M., & Verl, A. (2012). System Platform Requirements for High Performance CNCs. Proceeding of the 22nd International Conference on Flexible Automation and Intelligent Manufacturing FAIM 2012, 837–844.
  22. Kufner, A. (2012). Automatisierte Erstellung von Maschinenmodellen für dieHardware-in-the-Loop-Simulation von Montagemaschinen: Automatisierte Erstellung von Maschinenmodellen für dieHardware-in-the-Loop-Simulation von Montagemaschinen (S. ).
  23. Lechler, A., Schlechtendahl, J., Leurs, L., & Verl, A. (2012). Make CIP Safety Your Safety Protocol Industry Conference & 15th Annual Meeting of ODVA (S. ).
  24. Lechler, A., Schlechtendahl, J., Leurs, L., & Verl, A. (2012). Make CIP Safety Your Safety Protocol (S. ).
  25. Ledermann, T. (2012). Partikel-Schwarm-Optimierung zur Objektlageerkennung in Tiefdaten: Partikel-Schwarm-Optimierung zur Objektlageerkennung in Tiefdaten (S. ).
  26. Lopes, J., Wurst, K. H., & Verl, A. (2012). Industrielle Powerline Kommunikation für Werkzeugmaschine, Industrieroboter und Fertigungszellen: Industrielle Powerline Kommunikation für Werkzeugmaschine, Industrieroboter und Fertigungszellen (S. ).
  27. Mottahedi, A. A., M. M. (2012). Simulation of Metal Flat Strip in Rolling Technology, ICIII 2012, Singapore: Simulation of Metal Flat Strip in Rolling Technology, ICIII 2012, Singapore (S. ).
  28. Mottahedi, A. A., M. M. (2012). Effect of Melt Temperature in Aluminum Foam Process on Decomposition ofTitanium Hydride, ICAMAME 2011, Tokyo: Effect of Melt Temperature in Aluminum Foam Process on Decomposition ofTitanium Hydride, ICAMAME 2011, Tokyo (S. ).
  29. Mottahedi, M., R. S. V. A. (2012). Simulation-based Parameter Identification for Online Condition Monitoring ofSpindle Nut Drive, ISDT 2012, Mallorca: Simulation-based Parameter Identification for Online Condition Monitoring ofSpindle Nut Drive, ISDT 2012, Mallorca (S. ).
  30. Mottahedi, M., V. A. (2012). Numerische Berechnung der Hertzschen Pressung von wälzenden Komponenten,SimTech WCM2012, Stuttgart: Numerische Berechnung der Hertzschen Pressung von wälzenden Komponenten,SimTech WCM2012, Stuttgart (S. ).
  31. Neyrinck, A., & Verl, A. (2012). Optimale Maschinen und Anlagen durch Simulation von Varianten in der Konzeptionsphase. Automation 2012.
  32. Rahäuser, R., Meier, M., & Klemm, P. (2012). Offene Potentiale im Kühlschmierstoffkreislauf: Offene Potentiale im Kühlschmierstoffkreislauf (S. ).
  33. Rahäuser, R., P., E., Schlechtendahl, J., Klemm, P., Verl, A., & Meier, M. (2012). Total energy saving analysis method for coolant supply systems (S. ).
  34. Reuß, M., Dadalau, A., & Verl, A. (2012). Friction Variances of Linear Machine Tool Axes: Friction Variances of Linear Machine Tool Axes (S. ).
  35. Salinas, L., & Klemm, P. (2012). Methode zur automatisierten modellgestützten Maschinendiagnose. Methode zur automatisierten modellgestützten Maschinendiagnose. (S. ).
  36. Schlechtendahl, J. (2012). Test und Zertifizierung von SERCOS III SERCOS Anwender-Seminar 2012 (S. ).
  37. Schlechtendahl, J. (2012). Energieeinsparung durch intelligente Automatisierung (S. ).
  38. Schlechtendahl, J., Eberspächer, P., & Verl, A. (2012). Model based consumption monitoring and control (S. ). -.
  39. Schlechtendahl, J., Sommer, P., Eberspächer, P., & Verl, A. (2012). Automated Linkage of Consumption Models and Control Information in Control Systems (S. 387–391--). Springer-Verlag.
  40. Sekler, P. (2012). Modellbasierte Berechnung der Systemeigenschaften von Maschinenstrukturen aufder Steureung: Modellbasierte Berechnung der Systemeigenschaften von Maschinenstrukturen aufder Steureung (S. ).
  41. Siegfried Frey, A. V. (2012). Electromagnetic Friction Damper for the Use in Linear Motion Systems: Electromagnetic Friction Damper for the Use in Linear Motion Systems (S. ).
  42. Siegfried Frey, Alexandru Dadalau, V. A. (2012). Expedient Modelling of Ball Screw Feed Drives: Expedient Modelling of Ball Screw Feed Drives (S. ).
  43. Siegfried Frey, Konrad Groh, A. V. (2012). Semi-active Damping of Drive Systems: Semi-active Damping of Drive Systems (S. ).
  44. Verl, A., Eberspächer, P., & Schlechtendahl, J. (2012). ECOMATION - Energieeffiziente Steuerung von Werkzeugmaschinen (S. ).
  45. Verl, A., Krüger, J., Lechler, A., & Hägele, M. (2012). Mensch-Maschine-Kooperation: Mensch-Maschine-Kooperation (S. ).
  46. Verl, A., Lechler, A., & Schlechtendahl, J. (2012). Glocalized cyber physical production systems (S. 643–649--). Springer.
  47. Verl, A., Krüger, J., Lechler, A., & Apprich, S. (2012, Oktober). Mensch-Maschine-Kooperation. CDFK 2012 - Chinesisch-Deutsches Fertigungstechnisches Kolloquium 2012.
  48. Verl A., Hoffmeister H.-W., G. A. H. T. (2012). Kompakte Maschinenmodule für kleine Werkzeugmaschinen: Kompakte Maschinenmodule für kleine Werkzeugmaschinen (S. ).
  49. Voss, V., & Verl, A. (2012). Methoden zur Steigerung der Energieeffizienz von Roboteranwendungen: Methoden zur Steigerung der Energieeffizienz von Roboteranwendungen (S. ).
  50. Voss, V., & Voß, M. (2012). Simulationsmethoden zur Steigerung der Energieeffizienz: Simulationsmethoden zur Steigerung der Energieeffizienz (S. ).
  51. Voß, V. (2012). Wiederverwendbare Simulationsmodelle für die domänen- unddisziplinübergreifende Produktentwicklung: Wiederverwendbare Simulationsmodelle für die domänen- unddisziplinübergreifende Produktentwicklung (S. ).
  52. Voß, M., V. A. (2012). Konzept zur energieeffizienten Steuerung von Regalbediengeräten: Konzept zur energieeffizienten Steuerung von Regalbediengeräten (S. ).

2011

  1. A., L. (2011). Eine funktional einheitliche Schnittstelle: Eine funktional einheitliche Schnittstelle (S. ).
  2. A. Csiszar, M. Drust, T. D. A. V. C. B. (2011). Dynamic and Interactive Path Planning and Collision Avoidance for anIndustrial Robot Using Artificial Potential Field Based Method: Dynamic and Interactive Path Planning and Collision Avoidance for anIndustrial Robot Using Artificial Potential Field Based Method (S. ).
  3. A. Dadalau, A. V. (2011). Bottom-Up Component Oriented FE-Modelling of Machine Tools: Bottom-Up Component Oriented FE-Modelling of Machine Tools (S. ).
  4. A. Dadalau, K. Groh, M. R. A. V. (2011). Modeling linear guide systems with CoFEM - Equivalent models for rolling contact: Modeling linear guide systems with CoFEM - Equivalent models for rolling contact (S. ).
  5. Abel, M., Contreras, L., & Klemm, P. (2011). Application of RT-Preempt Linux and sercos III for Real-time Simulation,Thirtheenth Real-Time Linux Workshop, October 20 to 22, 2011, Prague, p. 75-80: Application of RT-Preempt Linux and sercos III for Real-time Simulation,Thirtheenth Real-Time Linux Workshop, October 20 to 22, 2011, Prague, p. 75-80 (S. ).
  6. Abel, M., Klemm, P., Silcher, S., & Minguez, J. (2011). Start-up of Reconfigurable Production Machines with a Service-OrientedArchitecture, 21st International Conference on Production Research, Stuttgart,Germany, 2011, Jul. 31. - Aug. 4. Start-up of Reconfigurable Production Machines with a Service-OrientedArchitecture, 21st International Conference on Production Research, Stuttgart,Germany, 2011, Jul. 31. - Aug. 4. (S. ).
  7. Abel, M., Lechler, A., Schlechtendahl, J., & P., K. (2011). Service Orientierte Architektur für die Konfiguration und Inbetriebnahme von Produktionsmaschinen - Universal Plug and Produce, 8. AALE Fachkonferenz,Tagungsband S. 111 - S. 120, Oldenburg Industrie Verlag, München, Germany, 2011 (S. ).
  8. Dietmair, A., Verl, A., & Eberspächer, P. (2011). Model Based Energy Consumption Optimisation in Manufacturing System andMachine Control. Model Based Energy Consumption Optimisation in Manufacturing System andMachine Control. (S. ).
  9. Dipper, T., Xu, X., & Klemm, P. (2011). Defining, recognizing and representing feature interactions in a feature-baseddata model: Defining, recognizing and representing feature interactions in a feature-baseddata model (S. ).
  10. Eberspächer, P., Schlechtendahl, J., Huf, A., Dietmair, A., & Verl, A. (2011). ECOMATION - Energieeffizienzsteigerung bei Werkzeugmaschinen durchsteuerungstechnische Maßnahmen (S. ).
  11. Held, M., Wehner, D., Hämmerl, R., Dangelmaier, M., Briem, A.-K., Reiff, C., & Wulle, F. (2018). Personalization in the Automotive and Building Sector - Research Program of the High-Performance Center „Mass Personalization“ in Stuttgart. MCP-CE. http://www.mcp-ce.org/images/proceedings/2018/28_Held.pdf
  12. Hoher, S. (2011). Real-time simulation of complex material flow systems: Real-time simulation of complex material flow systems (S. ).
  13. Hoher, S. (2011). System Dynamic Models and Real-time Simulation of Complex Material Flow Systems: System Dynamic Models and Real-time Simulation of Complex Material Flow Systems (S. ).
  14. Hoher, S. (2011). Multiskalen-Modellierung von komplexen Materialflussprozessen für die Echtzeitsimulation: Multiskalen-Modellierung von komplexen Materialflussprozessen für die Echtzeitsimulation (S. ).
  15. Hoher, S., R. S. (2011). A Contribution to the Real-time Simulation of Coupled Finite Element Models ofMachine Tools - a Numerical Comparison: A Contribution to the Real-time Simulation of Coupled Finite Element Models ofMachine Tools - a Numerical Comparison (S. ).
  16. Hoher, S., R. S. V. A. (2011). A System Dynamic Model of a Complex Material Flow System for VirtualCommissioning: A System Dynamic Model of a Complex Material Flow System for VirtualCommissioning (S. ).
  17. Huf, A. (2011). Linear Actuator Module based on multiple Drives: Linear Actuator Module based on multiple Drives (S. ).
  18. Huptych, M. (2011). Online-Bahnplanung für Robotersysteme mit Hilfe der Kurvenflussmethode: Online-Bahnplanung für Robotersysteme mit Hilfe der Kurvenflussmethode (S. ).
  19. Huptych, M., & Röck, S. (2011). Online Trajectory Planning for Handling Systems in Varying Envoronments usingthe Curve Shortening Flow Method: Online Trajectory Planning for Handling Systems in Varying Envoronments usingthe Curve Shortening Flow Method (S. ).
  20. Huptych, M., Röck, S., & Verl, A. (2011). Online-Roboterbahnplanung mit Hilfe der Kurvenflussmethode: Online-Roboterbahnplanung mit Hilfe der Kurvenflussmethode (S. ).
  21. Kircher, C. (2011). Selbstadaptierende NC-Steuerung für rekonfigurierbare Werkzeugmaschinen: Selbstadaptierende NC-Steuerung für rekonfigurierbare Werkzeugmaschinen (S. ).
  22. Kramer, C. (2011). Offene Antriebsreglerplattform: Offene Antriebsreglerplattform (S. ).
  23. Lechler, A. (2011). Moderne Maschinenkonzepte auf Basis der Echtzeit-Ethernet-Lösung SERCOS III: Moderne Maschinenkonzepte auf Basis der Echtzeit-Ethernet-Lösung SERCOS III (S. ).
  24. Lechler, A. (2011). Safe Control and Communication in Human-Robot Motion Coordination: Safe Control and Communication in Human-Robot Motion Coordination (S. ).
  25. Lechler, A., J.D., L., & A., V. (2011). Vergleich und Abstraktion von Antriebsprofilen für Ethernet-basierte Bussysteme: Vergleich und Abstraktion von Antriebsprofilen für Ethernet-basierte Bussysteme (S. ).
  26. Lechler, A., Lopes, J., & Verl, A. (2011). Einheitliche Applikationsschnittstelle für Ethernet-basierte Bussysteme: Einheitliche Applikationsschnittstelle für Ethernet-basierte Bussysteme (S. ).
  27. Lechler, A. (2011). Konzeption einer funktional einheitlichen Applikationsschnittstelle fürEthernet-basierte Bussysteme: Konzeption einer funktional einheitlichen Applikationsschnittstelle fürEthernet-basierte Bussysteme (S. ).
  28. Markus Birkhold, A. V. (2011). Post-Stuxnet: Sicherheitslücken bedrohen weiterhin Produktionsanlagen: Post-Stuxnet: Sicherheitslücken bedrohen weiterhin Produktionsanlagen (S. ).
  29. Meier, M. (2011). Verfahren zum emulationsgestützten MES-Engineering für die Photovoltaikindustrie: Verfahren zum emulationsgestützten MES-Engineering für die Photovoltaikindustrie (S. ).
  30. Meyer, C. (2011). Aufnahme und Nachbearbeitung von Bahnen bei der Programmierung durch Vormachenvon Industrierobotern: Aufnahme und Nachbearbeitung von Bahnen bei der Programmierung durch Vormachenvon Industrierobotern (S. ).
  31. Mottahedi, M., D. A. R. S. (2011). Finite Element and Experimental Analysis of Elastomeric Couplings, SIMTECH2011, Stuttgart: Finite Element and Experimental Analysis of Elastomeric Couplings, SIMTECH2011, Stuttgart (S. ).
  32. Mottahedi, M., R. S. V. A. (2011). Simulationsbasierte Parameteridentifikation für online Condition Monitoringeiner Spindelmutter, SimTech WCM 2011, Stuttgart: Simulationsbasierte Parameteridentifikation für online Condition Monitoringeiner Spindelmutter, SimTech WCM 2011, Stuttgart (S. ).
  33. Mottahedi, M., V. A. (2011). Simulation-based Parameter Identification for Online Condition Monitoring ofSpindle Nut Drive, ACUM 2011, Stuttgart: Simulation-based Parameter Identification for Online Condition Monitoring ofSpindle Nut Drive, ACUM 2011, Stuttgart (S. ).
  34. Müller, V., Spiller, A., & Verl, A. (2011). Mehr Energieeffizienz in Roboteranwendungen - Entwicklung von Methoden zurEnergieeinsparung: Mehr Energieeffizienz in Roboteranwendungen - Entwicklung von Methoden zurEnergieeinsparung (S. ).
  35. Puzik, A. (2011). Genauigkeitssteigerung bei der spanenden Bearbeitung mit Industrieroboterndurch Fehlerkompensation mit 3D-Piezo-Ausgleichsaktorik: Genauigkeitssteigerung bei der spanenden Bearbeitung mit Industrieroboterndurch Fehlerkompensation mit 3D-Piezo-Ausgleichsaktorik (S. ).
  36. Rahäuser, R., Pflüger, T., & Regenfelder, M. (2011). Economic potentials of improvements of energy efficiency in the supply ofcooling lubricants for metal cutting machine tools: Economic potentials of improvements of energy efficiency in the supply ofcooling lubricants for metal cutting machine tools (S. ).
  37. Reuß, M., & Verl, A. (2011). Reihenuntersuchung von Werkzeugmaschinen - Reibung in Linearachsen: Reihenuntersuchung von Werkzeugmaschinen - Reibung in Linearachsen (S. ).
  38. Reuß, M., & Verl, A. (2011). Ermittlung der Auswikung des statistischen Verhaltens baugleicherWerkzeugmaschinen: Ermittlung der Auswikung des statistischen Verhaltens baugleicherWerkzeugmaschinen (S. ).
  39. Röck, S. (2011). Hardware in the Loop Simulation of Production Systems Dynamics: Hardware in the Loop Simulation of Production Systems Dynamics (S. ).
  40. S. Hoher, P. Schindler, S. G. V. S. S. R. (2011). System Dynamic Models and Real-time Simulation of Complex Material Flow Systems: System Dynamic Models and Real-time Simulation of Complex Material Flow Systems (S. ).
  41. Schindler, P., S. V. H. S. G. S. (2011). Macroscopic models for conveyor belts with necking: Macroscopic models for conveyor belts with necking (S. ).
  42. Schlechtendahl, J. (2011). Test und Zertifizierung von SERCOS III SERCOS Entwickler-Seminar 2011 (S. ).
  43. Schlechtendahl, J., Eberspächer, P., Schrems, S., Verl, A., & Abele, E. (2011). Automated Approach to Exchange Energy Information (S. 47-54,--). Springer-Verlag.
  44. Schlechtendahl, J., Haag, H., Eberspächer, P., Friedrich, J., Verl, A., & Westkämper, E. (2011). Multilevel Control of Energy Consumption: Multilevel Control of Energy Consumption. Proceedings of the 21st International Conference on Production Research.
  45. Sekler, P., V. M. V. A. (2011). Model-based Calculation of the System Behavior of Machine Structures on theControl Device for Vibration Avoidance,: Model-based Calculation of the System Behavior of Machine Structures on theControl Device for Vibration Avoidance, (S. ).
  46. Selig, A. (2011). Informationsmodell zur funktionalen Typisierung von Automatisierungsgeräten: Informationsmodell zur funktionalen Typisierung von Automatisierungsgeräten (S. ).
  47. Simon, A., Frick, F., & Verl, A. (2011). Framework zur Systemgestaltung von FPGA-basierten Automatisierungsgeräten.
  48. Stotz, M. (2011). Adaptive Segementierung von Tiefenbildern für die 3-D-Objektlageerkennung aufBasis von kombinierten regelgeometrischen Elementen: Adaptive Segementierung von Tiefenbildern für die 3-D-Objektlageerkennung aufBasis von kombinierten regelgeometrischen Elementen (S. ).
  49. Verl, A., Abele, E., Heisel, U., Dietmair, A., Eberspächer, P., Rahäuser, R., Schrems, S., & Braun, S. (2011). Modular Modeling of Energy Consumption for Monitoring and Control: Modular Modeling of Energy Consumption for Monitoring and Control (S. ).
  50. Verl, A., Eberspächer, P., & Schlechtendahl, J. (2011). Nachhaltige Produktion durch Steuerungstechnik - Ecomation (S. ).
  51. Verl, A., Eberspächer, P., & Schlechtendahl, J. (2011). ECOMATION - Ökologische und ökonomische Automatisierung von Produktionssystemen (S. ).
  52. Verl, A., Schlechtendahl, J., & Dietmair, A. (2011). Energy Efficiency in Production Plants (S. ).
  53. Verl, A., Westkämper, E., Abele, E., Dietmair, A., Schlechtendahl, J., Friedrich, J., Haag, H., & Schrems, S. (2011). Architecture for Multilevel Monitoring and Control of Energy Consumption. In Glocalized Solutions for Sustainability in Manufacturing- (S. 347–352). Springer-Verlag. http://link.springer.com/chapter/10.1007/978-3-642-19692-8_60
  54. Verl A., H. T. (2011). Adaptronische Schwingführung - Linearführungssystem mit adaptivem Reibverhalten: Adaptronische Schwingführung - Linearführungssystem mit adaptivem Reibverhalten (S. ).
  55. Voss, V. (2011). Monitoring, Simulation and Optimization of Robot Applications for more EnergyEfficiency: Monitoring, Simulation and Optimization of Robot Applications for more EnergyEfficiency (S. ).
  56. Voss, V., & Verl, A. (2011). Methods for Simulation of Robot Applications for the Increase of Energy Efficiency: Methods for Simulation of Robot Applications for the Increase of Energy Efficiency (S. ).
  57. Voß, M., V. A. (2011). Konzept zur energieeffizienten Steuerung von Regalbediengeräten: Konzept zur energieeffizienten Steuerung von Regalbediengeräten (S. ).
  58. Walther, M. (2011). Antriebsbasierte Zustandsdiagnose von Vorschubantrieben: Antriebsbasierte Zustandsdiagnose von Vorschubantrieben (S. ).
  59. Yoshiyuki Noda, Markus Birkhold, K. T. O. S., & Verl, A. (2011). Flow Rate Estimation Using Unscented Kalman Filterin Automatic Pouring Robot: Flow Rate Estimation Using Unscented Kalman Filterin Automatic Pouring Robot (S. ).

2010

  1. A. Dadalau, M. Mottahedi, K. G. A. V. (2010). Parametric Modeling of ball screw spindles: Parametric Modeling of ball screw spindles (S. ).
  2. Banucu, R., Albert, J., Hafla, A., Huf, A., Reinauer, V., Scheiblich, C., & Rucker, W.-M. (2010). Automated Optimization in the Design Processof a Magnetically Levitated Table for Machine Tool Applications: Automated Optimization in the Design Processof a Magnetically Levitated Table for Machine Tool Applications (S. ).
  3. Banucu, R., Albert, J., Scheiblich, C., Reinauer, V., W. M. Rucker, W. M., Hafla, A., & Huf, A. : (2010). Design and Optimization of a Contactless Magnetically Levitated Actuator for4-Axis-Machining: Design and Optimization of a Contactless Magnetically Levitated Actuator for4-Axis-Machining (S. ).
  4. Bardakcioglu, A., Hafla, A., Laptev, I., & Verl, A. : (2010). Offene Steuerungs- und Antriebsplattform für Werkzeugmaschinen und Prozesse: Offene Steuerungs- und Antriebsplattform für Werkzeugmaschinen und Prozesse (S. ).
  5. Bengel, M. (2010). Workpiece-centered Approach to Reconfiguration in Manufacturing Engineering: Workpiece-centered Approach to Reconfiguration in Manufacturing Engineering (S. ).
  6. Brecher, C., V. A. L. A. S. M. (2010). Open control systems: State of the Art: Open control systems: State of the Art (S. ).
  7. Buck, R. (2010). AQUIMO: Bessere Maschinen durch mechatronische Zusammenarbeit in derProduktentwicklung: AQUIMO: Bessere Maschinen durch mechatronische Zusammenarbeit in derProduktentwicklung (S. ).
  8. Buck, R. (2010). AQUIMO: Mechatronische Zusammenarbeit verbessert Maschinen und Anlagen: AQUIMO: Mechatronische Zusammenarbeit verbessert Maschinen und Anlagen (S. ).
  9. Buck, R. (2010). Aquimo: Der Entwurfsbaukasten. Durch mechatronische Engineeringprozesse zuoptimalen Maschinen und Anlagen. Aquimo: Der Entwurfsbaukasten. Durch mechatronische Engineeringprozesse zuoptimalen Maschinen und Anlagen. (S. ).
  10. Buck, R. (2010). Kompetenz aus dem Kasten: Kompetenz aus dem Kasten (S. ).
  11. Buck, R. (2010). AQUIMO - Ein Leitfaden für Maschinen- und Anlagenbauer: AQUIMO - Ein Leitfaden für Maschinen- und Anlagenbauer (S. ).
  12. Buck, R., Litto, M., & Verl, A. (2010). Firmenübergreifend einsetzbare und adaptierbare Baukastenarchitekturen für dasmechatronische Engineering: Firmenübergreifend einsetzbare und adaptierbare Baukastenarchitekturen für dasmechatronische Engineering (S. ).
  13. Böck, J., Dietmair, A., Haag, H., & Rahäuser, R. (2010). Model Based Energy Efficiency Optimization for Production Planning. Model Based Energy Efficiency Optimization for Production Planning. (S. ).
  14. Dadalau A., V. A. (2010). Automatische Generierung von MPC-Kontakt zwischen FE-Baugruppen anhand derKontaktknoten: Automatische Generierung von MPC-Kontakt zwischen FE-Baugruppen anhand derKontaktknoten (S. ).
  15. Dietmair, A. (2010). Energy Efficiency Optimization Research at ISW in Stuttgart. Energy Efficiency Optimization Research at ISW in Stuttgart. (S. ).
  16. Dietmair, A. (2010). Beiträge der Automatisierungstechnik zur Energieeffizienz in der Produktion. Beiträge der Automatisierungstechnik zur Energieeffizienz in der Produktion. (S. ).
  17. Dietmair, A., Hafla, A., & Verl, A. (2010). Using Machine Signals for Condition Based Maintenance. Using Machine Signals for Condition Based Maintenance. (S. ).
  18. Dietmair, A., & Verl, A. (2010). Energy Efficiency Optimization in Production Planning and Control. Energy Efficiency Optimization in Production Planning and Control. (S. ).
  19. Dietmair, A., & Verl, A. (2010). Energy Consumption Assessment and Optimisation in the Design and Use Phase ofMachine Tools: Energy Consumption Assessment and Optimisation in the Design and Use Phase ofMachine Tools (S. ).
  20. Dietmair, A., & Verl, A. (2010). Energieeffizienter Betrieb von Produktionsanlagen: Energieeffizienter Betrieb von Produktionsanlagen (S. ).
  21. Dietmair, A., Zulaika, J., Sulitka, M., Bustillo, A., & Verl, A. (2010). Lifecycle Impact Reduction and Energy Savings through Light Weight Eco-Design ofMachine Tools. Lifecycle Impact Reduction and Energy Savings through Light Weight Eco-Design ofMachine Tools. (S. ).
  22. Frey, S. (2010). Kugelgewindemutter mit nachgiebigem Element im Kraftnebenschluss: Kugelgewindemutter mit nachgiebigem Element im Kraftnebenschluss (S. ).
  23. Frey, S., W. M. V. A. (2010). Periodic variation of preloading in ball screws: Periodic variation of preloading in ball screws (S. ).
  24. Groh, K., & Röck, S. (2010). A contribution to collision-free trajectory planning for handling systems invarying environments. A contribution to collision-free trajectory planning for handling systems invarying environments. (S. ).
  25. Hafla, A., Frey, S., Hamad, A., Dadalau, A., Croon, N., & Brenner, A. (2010). Shanghai Expo 2010 - German Pavillon: The Energy Source Pendulum Automation: Shanghai Expo 2010 - German Pavillon: The Energy Source Pendulum Automation (S. ).
  26. Held, M., Wehner, D., Hämmerl, R., Dangelmaier, M., Briem, A.-K., Reiff, C., & Wulle, F. (2018). Personalization in the Automotive and Building Sector - Research Program of the High-Performance Center „Mass Personalization“ in Stuttgart. MCP-CE. http://www.mcp-ce.org/images/proceedings/2018/28_Held.pdf
  27. Hoher, S. (2010). Lehrprojekt „Virtueller Tischkicker“: Lehrprojekt „Virtueller Tischkicker“ (S. ).
  28. Hoher, S. (2010). Modale und Balancierte Reduktion: Modale und Balancierte Reduktion (S. ).
  29. Huptych, M. (2010). Onlinefähige Trajektorienplanung für Handhabungssysteme in veränderlichenUmgebungen mit Hilfe der Kurvenflussmethode: Onlinefähige Trajektorienplanung für Handhabungssysteme in veränderlichenUmgebungen mit Hilfe der Kurvenflussmethode (S. ).
  30. Huptych, M. (2010). Simulationsbasierte Online-Bahnplanung mit Hilfe derKurvenflussmethode<br>ABS-Treffen 2010, Stuttgart: Simulationsbasierte Online-Bahnplanung mit Hilfe derKurvenflussmethode<br>ABS-Treffen 2010, Stuttgart (S. ).
  31. Keinert, M., Huf, A., & Verl, A. (2010). Kontinuierliche Kennwertberechnung als steuerungsinterne Task. Tagungsband SPS/IPC/Drives 2010, Fachmesse & Kongress, 23.-25. Nov. 2010, Nürnberg, 361–370.
  32. Kufner, A., Haug, K., & Klemm, P. (2010). Modellierung von Montagemaschinen für die Hardware-in-the-Loop-Simulation: Modellierung von Montagemaschinen für die Hardware-in-the-Loop-Simulation (S. ).
  33. Kufner A., Dreiss P., H. C. K. P. : (2010). Aufwandsanalyse zur Hardware-in-the-Loop-Simulation: Aufwandsanalyse zur Hardware-in-the-Loop-Simulation (S. ).
  34. M., W., Ch., B., & D., M. (2010). Sensorlose automatisierte Verschleißdiagnose an Vorschubsystemen mitKugelgewindetrieben in Werkzeugmaschinen: Sensorlose automatisierte Verschleißdiagnose an Vorschubsystemen mitKugelgewindetrieben in Werkzeugmaschinen (S. ).
  35. Mottahedi, M., D. A. H. A. V. A. (2010). Numerical analysis of relaxation test based on Prony series material model: Numerical analysis of relaxation test based on Prony series material model (S. ).
  36. Müller, V. (2010). Durchgängige Simulation im mechatronischen Engineering - vom FEM zurHardware-in-the-Loop Simulation: Durchgängige Simulation im mechatronischen Engineering - vom FEM zurHardware-in-the-Loop Simulation (S. ).
  37. Oglodin, V., Lechler, A., & Klemm, P. (2010). Störungsbeseitigung bei ähnlichen Maschinen. Berechnung desVerwandtschaftsgrades von Maschinen und Bewertung deren Relevanz: Störungsbeseitigung bei ähnlichen Maschinen. Berechnung desVerwandtschaftsgrades von Maschinen und Bewertung deren Relevanz (S. ).
  38. Oglodin, V., Lechler, A., & Klemm, P. (2010). Maschinenübergreifender Informationsaustausch. Methode zum Vergleich vonMaschinen für den Transfer von Erfahrungswissen: Maschinenübergreifender Informationsaustausch. Methode zum Vergleich vonMaschinen für den Transfer von Erfahrungswissen (S. ).
  39. Oglodin, V. (2010). Maschinenübergreifender agentenbasierter Informationsaustausch für dieStörungsbeseitigung: Maschinenübergreifender agentenbasierter Informationsaustausch für dieStörungsbeseitigung (S. ).
  40. Pritschow, G., V. A. F. S. (2010). Adaption der Vorspannung in Kugelgewindetrieben: Adaption der Vorspannung in Kugelgewindetrieben (S. ).
  41. Röck, S., Hoher, S., & Huptych, M. (2010). Simulationsbasierte Methoden für die Automatisierungstechnik in der Produktion: Simulationsbasierte Methoden für die Automatisierungstechnik in der Produktion (S. ).
  42. Salinas, L., & Klemm, P. (2010). Virtuelle Inbetriebnahme und Test von Leitsystemen: Virtuelle Inbetriebnahme und Test von Leitsystemen (S. ).
  43. Salinas, L., Oglodin, V., & Klemm, P. (2010). Konzept zur steuerungsinternen vorbeugenden Maschinendiagnose. Automatisiertesmodellgestütztes Verfahren und zugehörige Steuerungsarchitektur zurÜberwachung, Analyse und Diagnose von Maschinen und Fertigungsanlagen: Konzept zur steuerungsinternen vorbeugenden Maschinendiagnose. Automatisiertesmodellgestütztes Verfahren und zugehörige Steuerungsarchitektur zurÜberwachung, Analyse und Diagnose von Maschinen und Fertigungsanlagen (S. ).
  44. Schlechtendahl, J. (2010). Test und Zertifizierung von SERCOS III (S. ).
  45. Schlechtendahl, J. (2010). Whitepaper SERCOS Energy (S. ).
  46. Schlechtendahl, J. (2010). Grün Produzieren mit Sercos Energy (S. ).
  47. Schlechtendahl, J., & Verl, A. (2010). Sichere Kommunikation in der Automatisierungstechnik (S. ).
  48. Schmitz, S. (2010). Industrielle Powerline-Kommunikation für Antriebseinheiten in Werkzeugmaschinen: Industrielle Powerline-Kommunikation für Antriebseinheiten in Werkzeugmaschinen (S. ).
  49. Siegfried Frey, Alexander Hafla, A. V. (2010). Antriebssystem, insbesondere für Werkzeugmaschinene, sowie Verfahren zuraktiven Dämpfung eines solchen Antriebssystems: Antriebssystem, insbesondere für Werkzeugmaschinene, sowie Verfahren zuraktiven Dämpfung eines solchen Antriebssystems (S. ).
  50. Verl, A., Hafla, A., Frey, S., Dadalau, A., & Croon, N. : (2010). Vorschubantriebe für Werkzeugmaschinen - Trends,Innovationen, Herausforderungen: Vorschubantriebe für Werkzeugmaschinen - Trends,Innovationen, Herausforderungen (S. ).
  51. Verl, A., & Müller, V. (2010). FleRu - Flexible Rundflechtmaschine zur Fertigung von Stents: FleRu - Flexible Rundflechtmaschine zur Fertigung von Stents (S. ).
  52. Verl, A., & Müller, V. (2010). Analysis of different approaches to the reuse of simulation models for thevirtual knowledge-based product development: Analysis of different approaches to the reuse of simulation models for thevirtual knowledge-based product development (S. ).
  53. Verl, A., Müller, V., & Reuter, A. (2010). Disziplinübergreifendes Engineering. Integration von Simulationsdaten inmechatronische Komponentenmodelle: Disziplinübergreifendes Engineering. Integration von Simulationsdaten inmechatronische Komponentenmodelle (S. ).
  54. Verl, A., & Müller, V. : (2010). Wieder verwendbare Modelle zur disziplin- und domänenübergreifenden Simulation: Wieder verwendbare Modelle zur disziplin- und domänenübergreifenden Simulation (S. ).
  55. Verl, A., F. S. (2010). Correlation between Feed Velocity and Preloading in Ball Screw Drives: Correlation between Feed Velocity and Preloading in Ball Screw Drives (S. ).
  56. Weimer, T. (2010). Informationsmodell für die durchgängige Datennutzung in Fabrikplanung und -betrieb: Informationsmodell für die durchgängige Datennutzung in Fabrikplanung und -betrieb (S. ).
  57. Wouters, R., Verl, A., & Dietmair, A. (2010). Miniserie Steigerung Energieeffizienz. Miniserie Steigerung Energieeffizienz. (S. ).
  58. Zulaika, J. J., Dietmair, A., Campa, F. N., Lopez de Lacalle, L. N., & Verbeeten, W. (2010). Eco-efficient and highly productive production machines by means of a holisticEco-Design approach. Eco-efficient and highly productive production machines by means of a holisticEco-Design approach. (S. ).
  59. Zulaika, J. J., Dietmair, A., Verbeeten, W., Campa, F. J., & Lopez de Lacalle, L. N. (2010). Eco-efficient and highly productive machine tools by means of an holisticeco-design approach. Eco-efficient and highly productive machine tools by means of an holisticeco-design approach. (S. ).

Ihre Ansprechpartner

Dieses Bild zeigt Alexander Verl

Alexander Verl

Univ.-Prof. Dr.-Ing.

Institutsleitung, Professur Steuerungstechnik und Mechatronik für Produktionssysteme

Dieses Bild zeigt Oliver Riedel

Oliver Riedel

Univ.-Prof. Dr.-Ing.

Institutsleitung, Professur Produktionstechnische Informationstechnologien
Institutsleiter Fraunhofer IAO

Dieses Bild zeigt Armin Lechler

Armin Lechler

Dr.-Ing.

Stellvertretende Institutsleitung
Geschäftsführender Oberingenieur

Zum Seitenanfang