Mitarbeiter

Mr. Dipl.-Ing.
Daniel Coupek
Groupleader Mechatronic Systems

This picture shows  Daniel Coupek
Phone+49 711 685-84523
Fax+49 711 685-74523
Room5.106
Email address
Address
QR Code with contact data for  Daniel Coupek
University of Stuttgart
Institute for Control Engineering of Machine Tools and Manufacturing Units (ISW)
Seidenstr. 36
70174 Stuttgart
Germany
Subject:

Research in the field of Production Control

  • Correlation analysis and feedforward control
  • Methods for selective and sequential assembly
  • Artificial intelligence

Research in the field of Additive Manufacturing

  • Development of new machine components: printing heads, kinematic concepts
  • Control and path planning
  • Set-up and start-up of additive manufacturing systems

Applied research

  • Design and realization of new machine concepts
  • Design and implementation of control systems, safety components and HMI

Teaching: Student laboratory, student theses

Publications:
  1. 2017

    1. Coupek, Daniel ; Lechler, Armin ; Verl, Alexander: Cloud-based control strategy: downstream defect reduction in the production of electric motors. In: IEEE Transactions on Industry Applications, IEEE Transactions on Industry Applications., Institute of Electrical and Electronics Engineers (IEEE) (2017), S. 1–1
    2. Wulle, Frederik ; Coupek, Daniel ; Schäffner, Florian ; Verl, Alexander ; Oberhofer, Felix ; Maier, Thomas: Workpiece and Machine Design in Additive Manufacturing for Multi-Axis Fused Deposition Modeling. In: Procedia CIRP, Procedia CIRP. Bd. 60, Elsevier (2017), S. 229–234
  2. 2016

    1. Coupek, Daniel ; Lechler, Armin ; Verl, Alexander: Cloud-based control for downstream defect reduction in the production of electric motors. In: 2016 International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles & International Transportation Electrification Conference (ESARS-ITEC), 2016 International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles & International Transportation Electrification Conference (ESARS-ITEC) : Institute of Electrical and Electronics Engineers (IEEE), 2016c
    2. Coupek, Daniel ; Kovaleva, Daria ; Christof, Hans ; Wurst, Karl-Heinz ; Verl, Alexander ; Sobek, Werner ; Haase, Walter ; Gresser, Götz T ; Lechler, Armin: Fabrication of Biomimetic and Biologically Inspired (Modular) Structures for Use in the Construction Industry. In: Biomimetic Research for Architecture and Building Construction, Biomimetic Research for Architecture and Building Construction : Springer International Publishing, 2016b, S. 319–339
    3. Nebelsick, James H ; Allgaier, Christoph ; Felbrich, Benjamin ; Coupek, Daniel ; Reiter, Renate ; Reiter, Günter ; Menges, Achim ; Lechler, Armin ; Wurst, Karl-Heinz: Continuous Fused Deposition Modelling of Architectural Envelopes Based on the Shell Formation of Molluscs: A Research Review. In: Biomimetic Research for Architecture and Building Construction, Biomimetic Research for Architecture and Building Construction : Springer International Publishing, 2016, S. 243–260
    4. Coupek, Daniel ; Batke, Christoph ; Marx, David: Additiv gefertigte Werkzeugmaschinen für die Mikrobearbeitung. URL http://www.scope-online.de/produktionstechnik-werkzeugmaschinen/additiv-gefertigte-werkzeugmaschinen-fuer-die-mikrobearbeitung.htm
    5. Mottahedi, Mahdi ; Coupek, Daniel ; Lechler, Armin ; Verl, Alexander: New Technologies, Challenges and Trends in Additive Manufacturing for Production of Optimal Topologies. In: International Journal of Advancements in Research & Technology, International Journal of Advancements in Research & Technology. Bd. 5 (2016b), Nr. 8, S. 1–8
    6. Mottahedi, Mahdi ; Coupek, Daniel ; Lechler, Armin ; Verl, Alexander: Additive Manufacturing: Technology, Trends and Challenges. In: The 6th International Conference on Economics, Management, Engineering Sciences and Art, The 6th International Conference on Economics, Management, Engineering Sciences and Art. Belgium, Brussels : International Center of Academic Communication, 2016a
  3. 2015

    1. Colledani, Marcello ; Yemane, Anteneh ; Coupek, Daniel ; Lechler, Armin: Quality-oriented Design of Rotor Assembly Strategies for Electric Drive Production Systems. In: Procedia \CIRP\, Procedia \CIRP\. Bd. 36 (2015), S. 141 – 146. — CIRP 25th Design Conference Innovative Product Creation
    2. Coupek, Daniel ; Gülec, Aybike ; Lechler, Armin ; Verl, Alexander: Selective rotor Assembly Using Fuzzy Logic in the Production of Electric Drives. In: Procedia \CIRP\, Procedia \CIRP\. Bd. 33 (2015), S. 550 – 555. — 9th CIRP Conference on Intelligent Computation in Manufacturing Engineering - CIRP ICME ’14
    3. Engelberth, Tim ; Apprich, Stefanie ; Friedrich, Jens ; Coupek, Daniel ; Lechler, Armin: Properties of electrically preloaded rack-and-pinion drives. In: Production Engineering, Production Engineering. Bd. 9 (2015), Nr. 2, S. 269–276
  4. 2014

    1. Colledani, Marcello ; Coupek, Daniel ; Verl, Alexander ; Aichele, Jan ; Yemane, Anteneh: Design and Evaluation of In-line Product Repair Strategies for Defect Reduction in the Production of Electric Drives. In: Procedia \CIRP\, Procedia \CIRP\. Bd. 21 (2014), S. 159 – 164. — 24th CIRP Design Conference
    2. Coupek, Daniel ; Verl, Alexander ; Lechler, Armin ; Aichele, Jan ; Junker, Stefan: Defect reduction in the production of electric drives by downstream compensation and space-resolved inspection. In: Electric Drives Production Conference (EDPC), 2014 4th International, Electric Drives Production Conference (EDPC), 2014 4th International, 2014b, S. 1–8
    3. Coupek, Daniel ; Friedrich, Jens ; Verl, Alexander ; Lechler, Armin: Modular Information Sharing Platform for Real-Time Data Processing and Knowledge Extraction in Modern Production Systems. In: . Bol, Croatia : -, 2014a, S. -–
    4. Coupek, Daniel ; Verl, Alexander: Ausschussreduzierung und Defektkompensation in mehrstufigen Produktionssystemen: Ausschussreduzierung und Defektkompensation in mehrstufigen Produktionssystemen. In: . Düsseldorf : VDI Verlag, 2014, S. 82–91–
  5. 2013

    1. Coupek, Daniel ; Verl, Alexander ; Aichele, Jan ; Colledani, Marcello: Proactive quality control system for defect reduction in the production of electric drives. In: Electric Drives Production Conference (EDPC), 2013 3rd International, Electric Drives Production Conference (EDPC), 2013 3rd International, 2013, S. 1–6